This JETLY DSC4 B pump is advised for drilling from 1m3/h to 1.8m3/h maximum flow. Available in single-phase power from 0.37kw to 1.10kw.
Less than 5 days
Warning: Last items in stock!
This borehole pump is ready to install, made in stainless steel. Delivered with starter set and ampere-metric protection, electric cable with variable long according to the power and with a nylon suspension cord. Furthermore, the JETLY DCS4 B drilling pump provide an high efficiency and sand increased resistance, and to wear resistance.
Hydraulics characteristics of JETLY DSC4 bore hole pump :
- Multistages pump, with turbine and diffuser in technopolymer.
- Sleeve, shaft, coupling sleeve, stages, screws all made in stainless steel.
- Floating sand slinger (anti-abrasion), very high resistant.
- Connection flange with in-built strainer in technopolymer.
- In-built non-return valve in resin.
- CE standards.
Electric characteristics of JETLY DSC4 deep wells pump :
- Enclosed submersible motor, asynchronous, 2 poles (2800 rpm).
- All made in stainless steel AISI 304.
- Rotor designed for axial loads.
- Number of motor starts : 20/h maxi.
- Level of protection : IP 68.
- Insulation classe : B.
* Electric cable, nylon cord and starter set are provided with the pump.
|Model||DCS4 B-8 M||DCS4 B-12 M||DCS4 B-16 M||DCS4 B-24 M|
|Reference||508 056||508 057||508 058||508 059|
|Maxi. flow (m3/h)||2.4|
|Nominal flow (Q) : (m3/h)||from 1.2 to 2|
|Maxi. TDH (m C.E)||49.6||74.4||92.2||148.8|
|Maxi. pressure (bar)||4.9||7.4||9.2||14.8|
|Maxi. immersion (m)||35||50||70||110|
|Temperature of liquid||0°C à + 30 °C|
|Stainless steel water bath lubrificated IP 68||DAB|
+ Nylon cord (m)
|Ø of pump (mm)||97|
|Ø of discharge (BSP)||1" 1/4 G|
Required accessories :
- Control box and low water level protection (DSE ou DSN).
- Water proof junction box for cable lenghtening.
- Submersible electric cable.
Customer ratings and reviews