This JETLY DSC4 D pump is advised for drilling with a flow to 4.8 m3/h,with depth between 30m to 60m. Available in single-phase power to 0.55kw, 0.75 kw and 1.10kw.
Less than 5 days
Warning: Last items in stock!
This borehole pump is ready to install, made in stainless steel. Delivered with starter set and ampere-metric protection, electric cable with variable long according to the power and with a nylon suspension cord. Furthermore, the JETLY DCS4 D drilling pump provide an high efficiency and sand increased resistance, and to wear resistance.
Hydraulics characteristics of JETLY DSC4 bore hole pump :
- Multistages pump, with turbine and diffuser in technopolymer.
- Sleeve, shaft, coupling sleeve, stages, screws all made in stainless steel.
- Floating sand slinger (anti-abrasion), very high resistant.
- Connection flange with in-built strainer in technopolymer.
- In-built non-return valve in resin.
- CE standards.
Electric characteristics of JETLY DSC4 deep wells pump :
- Enclosed submersible motor, asynchronous, 2 poles (2800 rpm).
- All made in stainless steel AISI 304.
- Rotor designed for axial loads.
- Number of motor starts : 20/h maxi.
- Level of protection : IP 68.
- Insulation classe : B.
* Electric cable, nylon cord and starter set are provided with the pump.
|Model||DCS4 D-6 M||DCS4 D-8 M||DCS4 D-13 M|
|Voltage single-phase (V)||230|
|Maxi. flow (m3/h)||4.8|
|Nominal flow (Q) : (m3/h)||3 à 4.2
|Maxi. TDH (m C.E)||36||48||78|
|Pression max (bar)||3.6||4.8||7.8|
|Maxi. immersion (m)||28||38||60|
|Temperature of liquid||0°C à + 30 °C|
|Starter box set||inclus|
|Stainless steel water bath lubrificated IP 68||DAB|
+ nylon cord (m)
|Ø of pump (mm)||97|
|Discharge Ø (BSP)||1" 1/4 G|
Required accessories :
- Control box and low water level protection (DSE ou DSN).
- Water proof junction box for cable lenghtening.
- Submersible electric cable.
Customer ratings and reviews