JETLY DSC4 C pump is designed for drilling from 1.8 m3/h to 3 m3/h. Available in power three-phase from 0.37 Kw to 1.10 Kw.
Less than 5 days
Warning: Last items in stock!
This borehole pump is ready to install, made in stainless steel. Delivered with electric cable with variable long according to the power and with a nylon suspension cord. Furthermore, the JETLY DCS4 C drilling pump provide an high efficiency and sand increased resistance, and to wear resistance.
Hydraulics characteristics of JETLY DSC4 bore hole pump :
- Multistages pump, with turbine and diffuser in technopolymer.
- Sleeve, shaft, coupling sleeve, stages, screws all made in stainless steel.
- Floating sand slinger (anti-abrasion), very high resistant.
- Connection flange with in-built strainer in technopolymer.
- In-built non-return valve in resin.
- CE standards.
Electric characteristics of JETLY DSC4 deep wells pump :
- Enclosed submersible motor, asynchronous, 2 poles (2800 rpm).
- All made in stainless steel AISI 304.
- Rotor designed for axial loads.
- Number of motor starts : 20/h maxi.
- Level of protection : IP 68.
- Insulation classe : B.
* Electric cable and nylon cord are provided with the pump.
|Model||DCS4 C-6 T
||DCS4 C-9 T
||DCS4 C-13 T||DCS4 C-19 T|
|Voltage 50Hz (V)||400|
|Maxi. flow (m3/h)||4.2|
|Nominal flow (Q) : (m3/h)||from 1.8 to 3.2
|Maxi. TDH (m C.E)||33||49.5||71.5||104.5|
|Maxi. pressure (bar)||3.3||4.9||7.1||10.4|
|Maxi. immersion (m)||25||36||50||75|
|Temperature of liquid||from 0°C to + 30 °C|
|Stainless steel water bath lubrificated IP 68||DAB|
+ nylon cord (m)
|Ø pump (mm)||97|
|Ø of discharge (BSP)||1" 1/4 G|
Required accessories :
- Control box and low water level protection (DSE ou DSN).
- Water proof junction box for cable lenghtening.
- Submersible electric cable.
Customer ratings and reviews