Lifting and distribution of water in pressure, for the unconnected installations to city water network, for emergency installation, or for mobile using of water pressure pump.
Less than 5 days
Warning: Last items in stock!
This little booster unit 12V or 24 V, its permits to lift water easily. Its equiped with suction and discharge hoses, its works automatically by valve. Power supply directly on battery, solar panel, or 12V 24V low voltage network.
- 1 CC 12V or 24V self-priming pump, stainless steel shaft, arbre inox, housing pump in nickel-plated brass.
- 1 in-line pre-filter on suction head.
- 1 cold water 2L tank in food-grade quality, all made in stainless steel. Interchangeable bladder.
- 1 pressure switch 2-poles - 0-5 bar.
- 1 axial pressure gauge 0-6 bar.
- 2 ball valves 1/4 turn - 1/2".
- 1 femal tee in brass 1/2".
- 1 foot valve + stainless steel strainer.
- 4 barbed fittings to 14mm with 1/2" captive nut.
- 4 hose clamps in stainless steel (W4).
- 7m hose, 14mm Ø inside, food-grade quality is steel reinforced for suction and discharge.
Use for :
- Water pressure mobile pump.
- Mountain chalet, isolated sites.
- Caravan, motor caravan, mobil home,
- Pleasure boat, yatching.
|Model||HYDROPHORE 12||HYDROPHORE 24|
|Ref.||605 269||605 270|
|Voltage (V cc)||12||24|
|Maxi. intensity (A)||15||8|
|Maxi. pressure (bar)||4|
|Self-priming height (m)||1.5|
|Maxi. flow (l/min)||12|
|Starting pressure (bar)||2|
|Stop pressure (bar)||3|
|Tank capacity (L)||2|
|Ø barbed fittings (mm)||14|
|Ø femal outel valve (BSP)||1/2"|
LPM : liter per minute (flow rate).
Customer ratings and reviews