POMPES H2O JARDINOX M55/75 pressure boosting set in stainless steel, 60Lcapacity bladder tank, with jet pump in stainless steel, 0.55kw or 0.75kw, single-phase, bladder made in alimentary rubber. Delivery mounted and cabled.
Less than 6 days
Warning: Last items in stock!
Ideal for water supply system in aggressives/corrosives environments, or with moisture risks, condensation risks. Extremely robust, equiped with : CALPEDA NGX jet pump, GITRAL-ZILMET horizontal stainless steel tank 10bar, food quality, XMP contactor, stainless steel manometer, flexible M/F in stainless steel and with connections and cables.
Use for :
- Pumping from wells (maxi. heighter of suction to 9m).
- Lifting untreated water from drill tank (we advise 1 sieve filter 100µ ± at suction).
- Pumping in water replenishment of city network.
- Water-pumping directly on the water city network, in this case you have to use a controllable check valve or a tank, (to prevent to siphon the water city netwok in case of malfunction).
- Home booster, little irrigation, sanitary blocks, water trough…
- Pressure boosting system for aggressives environments or with corrosives risks.
- Boosting set for factories kitchens, pharmaceutical laboratories, cosmetics…
Electric characteristics :
- Induction motor 2 pôles, 50Hz (n = 2900 rpm).
- NGXM : single phase 230 V ± 10%, with thermal protection.
- Level of protection : IP 54
- Insulation classe F.
Characteristics of hydraulic pump :
- Monocellular self-priming jet with in-built ejector.
- Pump body and cover in stainless steel AISI 304.
- Shaft in stainless steel AISI 430.
- Turbine in brass.
- Diffusor and ejector in NORYL PRO-GF20.
- Mechanical seal in hard carbon - ceramic - NBR.
Characteristics hydraulic tank :
- Interchangeable bladder tank, in alimentary quality.
- 60L capacity.
- Made in satinless steel AISI 304.
- Bladder in EPDM butyl rubber, use for potable water.
- Support of pump in stainless steel AISI 304.
- Threaded male end.
- 1 bladder tank in stainless steel AISI 304, horizontal 60L with avec adaptation holder pump, cuve in food quality, pressure : 10bar.
- 1 CALPEDA NGXM electric pump single-phase, self-priming jet. Made in stainless steel, power 0.55kw or 0.75 kw - (détails in tabe below).
- 1 XMP Telemecanique pressure switch three-poles - 0-6 bar ou 0-12 bar.
- 1 axial pressure switch 0-10 bar.
- 1 5-ways connector in brass 1".
- 1 flexible connecting in stainless steel M/F 1" - long : 700mm.
- 1 ball valve fitting M/F - 1".
- 1 various brass fittings.
- Stainless steel screws.
- HO7RN-F cable 3G1.5 mm².
- Normalized plug : 2P+T.
- Delivery from 5 to 8 days, mounted and cabled.
- Guarantee 2 years.
- Standard norme EN 60034-1; EN 60034-30. EN 60335-1, EN 60335-2-41.
|Ref.||600 242||600 243|
|Current consumption (A)||4.2||5.4|
|Maxi. flow (m3/h)||3||5|
|Maxi. flow (l/min)||50||83|
|TDH (m CE)||53||42|
|Maxi. pressure (bar)||5.3||4.2|
|Self-priming (m)||0 à -9||0 à -9|
|Hole suction and discharge Ø (BSP)||1" F|
|Stainless steel tank (L)||60|
|Weight of unit (kg)||21||26|
Customer ratings and reviews