Drainage pump kit for pits or tank all equiped pump put on a support, with valve, hose length 2m. Power rate from 0.55 to 1.10kw - single phase.
Warning: Last items in stock!
Lifting pump kit for waste water and loaded water - Maxi passage 50mm. Delivery complete for works in waste water and rainwater pits.
Caracteristics of the draining kit with impeller Vortex DN50 equiped :
- Inductin motor 2 poles, 2900 rpm, (continuous service)
- Winding triple impregnation humidity resistant
- Insulation classe F - Protection IP X8
- Thermical protection and capacitor included
- Body pump and turbine made in cast iron - Shaft made in stainless steel 303
- Mechanical double seat made in alumina ceramic/hard carbon/NBR in oil room
- Temperature of liquid until + 35°C
- Immersion depth : maxi 5m
- Value of PH between 6 and 11
- Passage in (mm) = 50
ERO-4 lifting kit comprises :
- 1 Calpeda GQVM submersible pump equiped with automatic switch float
- 1 right support made in cast iron 1" - DN50
- 1 guide bar made in stainless steel length 2m
- 1 90° bends DN50 (bonded/screwed)
- 1 non-return valve with PVC ball (special for loaded water)
- 1 PVC hose length 2m - rigid pressure DN50
All is ready to be blonded and screwed.
||210 149||50-8 SG||0.55||230||4.3||2" H
||210 150||50-9 SG||0.75||230||4.8||2" H
||210 151||50-11 SG||0.90||230||6.6||2" H
|ERO-4011||210 152||50-13 SG||1.10||230||8.4||2" H
|50-8 SG|| H.M.T
Customer ratings and reviews