Barbed fitting

Barbed fitting (Hydraulics accessories): selection of products in the Hydraulics accessories category. Products available at Pompes H2O, advice on +33 3 44 25 91 01.

Stainless steel threaded connection
Cut-off valve
Check valve - Stainer filter
Barbed fitting
Guillemin hose coupling
DSP fittings
Raccord GFR
Keyser fittings
Camlock fittings
Clamp fittings
DIN fittings
SMS fittings
Macon fittings
STORZ couplings
PERROT fittings
Express fittings
DECA brass coupling pipe
GEKA fittings
Snap-fit fittings
Lance - Spray gun
Fire valves
PVC pressure fittings
Flanges
Pressure gauge
Suspension pump accessories
Galvanised screw fittings
Threaded connection
Stainless steel braided hose - fuel hose
Sub-metering
Pressure reducer
Clamp hose
Sealing
Wall pass-through fittings
Couplings
Raccord male à douille crantée Laiton
2 to 4 days
Barbed fitting
Brass female hose tail fitting
$8.38

$8.38 tax excl.

Delivery 2 to 4 days

Fittings with swivel nut, barbed hose tail end for fitting onto rubber, braided and flexible PVC hose, tightened with a clamp. Made of brass, nut with gasket, professional quality.
Raccord male à douille crantée Laiton
2 to 4 days
Barbed fitting
Brass male hose tail fitting
$7.26

$7.26 tax excl.

Delivery 2 to 4 days

Barbed hose tail fitting for fitting onto flexible rubber and PVC hoses, tightened with a clamp, straight male threaded. Made of brass, long barb, professional quality.
Raccord mâle avec joint à douille cranté laiton Raccord mâle avec joint à douille cranté laiton 2
2 to 3 days
Diesel accessories
Male fitting with serrated hose tail gasket
$9.50

$9.50 tax excl.

Delivery 2 to 3 days

These fittings are used for assembly to flexible or semi-rigid hoses, and are intended for suction, delivery, nozzle connections, accessories... Diesel, oil and hydrocarbon pumps...
Embout mâle à coller et cannelé PVC PN16
2 to 4 days
PVC pressure fittings
Male solvent weld and hose barb adaptor PVC PN16
$4.47

$4.47 tax excl.

Delivery 2 to 4 days

Hose barb adaptor in PVC-U, PN 16 bar, male solvent weld connection onto pressure PVC and hose barb end for flexible hose.
Raccord cannelé à écrou tournant inox 316L
2 to 3 days
Barbed fitting
Stainless steel 316 barbed fitting with swivel nut
$16.39

$16.39 tax excl.

Delivery 2 to 3 days

Flexible hose connecting fitting, with barbed end and swivel nut with flat PTFE gasket, fitting entirely machined in 316 stainless steel. Available from 1/2" diameter up to 4".
Jonction cannelée Laiton droite
2 to 4 days
Barbed fitting
Straight brass hose barb joint
$4.47

$4.47 tax excl.

Delivery 2 to 4 days

Straight connection of two hoses, manufactured by machining or hot forging from brass bar, available for hoses of 10 to 40 mm inside diameter.
Raccord droit cannelé long à écrou tournant inox 316 Raccord droit cannelé long à écrou tournant inox 316 2
2 to 4 days
Barbed fitting
Straight fitting, long barbed end, 316 stainless steel swivel nut
$30.91

$30.91 tax excl.

Delivery 2 to 4 days

Straight barbed fitting with 316 stainless steel swivel nut, for use on the suction and delivery of stainless steel pumps, for drinking water supply, food liquid transfer, cylindrical threaded hexagonal nut, long barbed end.
Showing 1-15 of 15 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

Connecting a flexible hose to rigid pipework

A barbed fitting has a ribbed shank over which a flexible hose is slipped and held by a hose clamp. The other end is threaded (male or female) or has a swivel nut. It is found on water circuits, pumps and liquid transfer installations.

Brass or stainless, swivel nut or threaded

  • Brass for everyday uses, 316 stainless for harsher environments; check fluid compatibility.
  • Swivel nut: makes assembly easier without turning the hose.
  • Shank diameter to match the inside diameter of the hose.

Frequently asked questions: Barbed fittings

How do I secure the hose on a barbed fitting?

Push the hose fully onto the shank and tighten a suitable clamp. If needed, warm the hose slightly to ease fitting, depending on its material.

Which diameter should I choose?

The shank diameter must match the inside diameter of the hose. The thread at the other end must match that of the pump or valve.

Does a barbed fitting withstand pressure?

It depends on the hose, the clamp and the fitting. Check the permissible working pressure given by the hose manufacturer and on the fitting's product page.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.