Lift pump

Submersible lift pumps for waste water, loaded water, rainwater, sand-laden water, aggressive liquids, thick liquids, ATEX lift pumps, construction site pumps, as well as accessories for lift pump installations, such as base stands, guide rails, float switches and level regulators, Piezo probe, control panels, overflow alarms, pipes, lift pump outlet kits, non-return valves, galvanised cast iron fittings, pressure PVC, 316 stainless steel.

Domestic pump
Dewatering pump
Domestic sewage pump
Septic pump
Sewage pump station - one pump
Sewage pump station - two pumps
Macerator pump
Corrosion resistant pump
Worksite pump
Accessories for lifting
Lifting micro-station
12/24V lifting pump
Station de relevage eaux chargées habitation 150 L Station de relevage eaux chargées habitation 150 L 2
3 to 5 days
Sewage pump station - one pump
150L loaded water lifting station with grinder pump
220217
€1,508.33

€1,508.33 tax excl.

Delivery 3 to 5 days

150 L sewage lifting station for waste water/loaded water from a dwelling, fitted with a 0.75 kW single-phase lift pump, with a macerator system to finely cut stringy matter and thus prevent the impeller from blocking.
Dégrilleur avant fosse et station de relevage
Accessories for lifting
200 L screen filter for upstream of septic tank and lifting station
800339
The effluent enters the filter at the top and exits at the bottom; the inclined screen retains solids and objects larger than 50 mm, tank volume 200 L. The screen filter separates and removes solids and objects likely to clog installations, installed upstream of a lifting station or a digester settling tank.
View
Alimentation de secours 230V CombiMaster 3000VA
Water pump control panel
230V CombiMaster 3000VA backup power supply
008319
€4,228.33

€4,228.33 tax excl.

Backup power supply for single-phase lift pump, up to 2.60 kw, automatic switching in the event of mains failure, the battery takes over, the converter provides an output voltage of 230V. Backup power supply for single-phase lift pumps, CombiMaster 24/3000-60, battery cut-off, 50mm² battery cables, 2 AGM 12/225 Ah batteries.
Réhausse 250mm pour Califosse et Calidom
2 to 4 days
Sewage pump station - one pump
250 mm riser for Califosse and Calidom
220112
€175.00

€175.00 tax excl.

Delivery 2 to 4 days

Riser for CALIFOSSE and CALIDOM lifting stations, riser height 250 mm. Specially designed for CALPEDA circular tanks.
Pompe de relevage ATEX inox 316 liquide industriel
3 to 4 weeks
ATEX pump
316 stainless steel ATEX lift pump for industrial liquid
€2,941.67

€2,941.67 tax excl.

Delivery 3 to 4 weeks

316 stainless steel lift pump ATEX Ex II 2G Ex eb h mb ob IIC T5 Gb, pumping of leachate, industrial liquids, road run-off water, liquids contaminated by hydrocarbons.
Pompe de relevage liquides chimiques et corrosifs - DGX (tri) Pompe de relevage liquides chimiques et corrosifs - DGX (tri) 2
4 to 6 weeks
Corrosion resistant pump
316 stainless steel lift pump for loaded liquids DGX T
€2,158.33

€2,158.33 tax excl.

Delivery 4 to 6 weeks

Vortex impeller pump, all 316 stainless steel construction, able to operate in submerged mode, designed for lifting filtered, extremely corrosive or aggressive liquids. Vertical DN50 outlet, three-phase supply, power from 0.37 to 1.50 Kw.
Pompe de relevage pour liquides chimiques et corrosifs - DRX Pompe de relevage pour liquides chimiques et corrosifs - DRX 2
4 to 6 weeks
Corrosion resistant pump
316 stainless steel lift pump for slightly loaded liquids DRX M/A
€2,158.33

€2,158.33 tax excl.

Delivery 4 to 6 weeks

Submersible pump all 316 stainless steel, for clear or slightly loaded liquids, designed for pumping extremely corrosive liquids, chemical liquids, leachate pumping, pumping in saline environments. Single-phase 230 volt supply, pump fitted with a float.
Pompe de relevage liquides chimiques et corrosifs - DRX (tri) Pompe de relevage liquides chimiques et corrosifs - DRX (tri) 2
4 to 6 weeks
Corrosion resistant pump
316 stainless steel lift pump for slightly loaded liquids DRX T
€2,116.67

€2,116.67 tax excl.

Delivery 4 to 6 weeks

Submersible pump all 316 stainless steel, for clear or slightly loaded liquids, designed for pumping extremely corrosive liquids, chemical liquids, leachate pumping, pumping in saline environments. Three-phase 400 volt supply.
Pompe de relevage vortex inox 316 liquides chimiques chargées
  • New
3 to 4 weeks
Corrosion resistant pump
316 stainless steel vortex lift pump for loaded chemical liquids
€1,450.00

€1,450.00 tax excl.

Delivery 3 to 4 weeks

Submersible pumps for loaded water that is particularly corrosive, food liquids, chemical, pharmaceutical, galvanic, textile, tannery and metallurgical industries.
Coude 90° à visser F/F inox 316L
2 to 4 days
Stainless steel threaded connection
316L stainless steel 90° M/F elbow threaded
€3.00

€3.00 tax excl.

Delivery 2 to 4 days

90° M/F elbow threaded made in 316L stainless steel. Male & female cylindric threaded BSP. Standard ISO 228/1, available in models : 1/2", 3/4", 1", 1" 1/4, 1" 1/2, 2", 2" 1/2, 3" & 4".
Pompe de relevage à roue vortex Calpeda GXV 40 Pompe de relevage à roue vortex Calpeda GXV 40 2
2 to 4 days
Domestic sewage pump
All stainless steel lift pump with vortex impeller GXVM 40 (230V)
€717.50

€717.50 tax excl.

Delivery 2 to 4 days

All stainless steel submersible pump, lifting of waste water and sewage (WC), vortex impeller, passage of particles 35mm max, vertical threaded delivery 1" 1/2. Ball float for automatic start and stop. Three power ratings available, 0.55 Kw, 0.75 Kw and 0.90 Kw.
HYDRO INTERVENTION 20 - 30 dewatering submersible pump
3 to 5 days
Worksite pump
Aluminium drainage pump TSURUMI KTV
€1,650.00

€1,650.00 tax excl.

Delivery 3 to 5 days

The Tsurumi KTV pump series are very light and easy to handle. Applications: pumping of muddy water, sandy water, heavily loaded water, waste water, quarry water, building sites, industrial water, mines, public works... 400V power supply.
Tuyau PVC pour carburant OPAL FUEL
2 to 4 days
Flexible PVC hoses
Amazone super-elastic PVC hose 25m
€240.00

€240.00 tax excl.

Delivery 2 to 4 days

Super elastic PVC hose, reinforced with a rigid spiral. For suction and delivery of waste water, slurry, fertilisers... Diameters available from 25 to 203 mm.
Pompe submersible grande hauteur manométrique
1 to 2 weeks
Dewatering pump
APG high head submersible pump
€1,440.00

€1,440.00 tax excl.

Delivery 1 to 2 weeks

High head pump for clear or very slightly loaded water, cast iron construction, eco-friendly motor.
Pompe de relevage ATEX liquide industriel
3 to 4 weeks
ATEX pump
ATEX lift pump for industrial liquid
€2,275.00

€2,275.00 tax excl.

Delivery 3 to 4 weeks

ID DERBY ATEX pumps comply with European standard CE 0722 Ex II 2G Ex eb h mb ob IIC T5 Gb, they allow pumping of leachate, industrial liquids, road run-off water, liquids contaminated by hydrocarbons.
Pompe vide-cave automatique Pedrollo TOP
2 to 4 days
Domestic pump
Automatic cellar pump Pedrollo TOP
200117
€279.17

€279.17 tax excl.

Delivery 2 to 4 days

The TOP 2 submersible basement drainage pump is suitable for lifting clear or very slightly loaded water. Power 0.37 Kw.
Micro-station de relevage automatique GEOCOMP Micro-station de relevage automatique GEOCOMP 2
2 to 4 days
Lifting micro-station
Automatic lifting micro-station GEOCOMP
201040
€745.83

€745.83 tax excl.

Delivery 2 to 4 days

Very useful when it is not possible to connect to the drainage network, the GEOCOMP micro station is designed to macerate and discharge waste water from a WC, a washbasin, a shower/bath/bidet...
Automatic small sewage pump station 40L
2 to 4 days
Sewage pump station - one pump
Automatic small sewage pump station 40L
220011
€758.33

€758.33 tax excl.

Delivery 2 to 4 days

Automatic small sewage pump station 40L for lifting of sewage, clean water or loaded slightly. fully unit and ready to install, with tank burried 40L + power pump 0.25kw + equipment.
Showing 1-24 of 228 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

How to choose a lift pump

Three criteria guide the choice: the type of water to be removed, the flow rate you need and the discharge head. A lift pump moves clean, loaded or waste water to a higher or more distant point: sewer, ditch, sump or tank.

Clean water, loaded water, waste water: the right model

  • Clean water (flooded cellar, rainwater, draining): cellar drainage pump or drainage pump.
  • Loaded water (light mud, building sites): pump with a wide free passage or a vortex impeller.
  • Waste water (toilets, kitchen, basement): sewage pump, lift station with tank, or grinder pump.

Which category should you choose?

For a detailed comparison: Choosing a lift pump.

Accessories for a lift installation

Complete the pump with a non-return valve, a float or level detector, a control panel, a high-level alarm and a mounting base. These accessories are available in the lift accessories and control panels categories of the shop.

Frequently asked questions: Lift pumps

What is the difference between a cellar pump, a loaded-water pump and a sewage pump?

A cellar or drainage pump removes clear or lightly loaded water (flooded cellar, sump, rainwater). A loaded-water pump lets suspended particles pass (light mud, fine gravel). A sewage pump has a large free passage for the solids found in domestic waste water. Each product page gives the free passage, i.e. the maximum particle size the pump accepts.

When should I choose a grinder pump?

A grinder pump removes the waste of a toilet, washbasin or shower installed below the level of the sewer (basement, extension). It grinds the solids and pushes them through a small-diameter pipe over a significant height or distance. Follow the manufacturer's instructions for connection and discharge.

How do I choose the flow rate and the head?

The total head is the vertical height to climb, plus the friction losses in pipes and bends. Choose a pump whose performance curve gives at least the flow you need at that head, and keep a margin. A pipe that is too long or too narrow reduces the real flow noticeably.

Do I need a non-return valve and an alarm?

A non-return valve on the discharge pipe stops water from flowing back into the tank each time the pump stops. A high-level alarm warns you of a failure or a blockage before the tank overflows.

Single-phase or three-phase: which power supply?

Small and medium pumps run on single-phase 230 V, like a household socket. High-power pumps (public bodies, industry, lift stations) are available in three-phase 400 V. 12 V and 24 V models also exist for mobile installations.

Lift pump or lift station?

A submersible pump placed at the low point is enough to empty a cellar from time to time. As soon as drainage is permanent (sanitary fittings, kitchen or a basement room), you install a lift station: a sealed tank, one or more pumps, a level control and a non-return valve. Two pumps take turns and keep the service running if one fails.

Which pump for a basement bathroom?

For the water from toilets, shower and washbasin: a sewage pump, a macerator pump or a lifting micro-station with built-in grinder, depending on the discharge point. Check the free passage and the discharge diameter on the product page. The detail is in the guide Choosing a lift pump.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.