The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
CALPEDA GXVM submersible pump for dewatering of clean or waste water in all stainless steel 304, with vortex impeller, and ball float switch for the automatic switching on and off. Available in 3 models : 0.25kw, 0.37kw and 0.45kw.
CALPEDA GXVM GF sewage pump for clean water or waste water 230V Pompe submersible de drainage tout inox 304, roue Vortex, avec flotteur magnétique (parallèle à la pompe), pour la mise en marche et l’arrêt automatique, modèle monophasé 230V en 0.25, 0.37 et 0.45 Kw.
DRENAG automatic submersible pump with float switch made of stainless steel, with thrust ring type impeller, for draining wastewater containing solids of maximum 10 mm diameter size.
FLYGT READY dewatering pump designed for full application of dewatering and pumping. READY pump is ideal for rapid response plan in case of flood. With its composition made of stainless steel, the READY pump is small, low weight & long life pump.
FLYGT Steelinox SXM 11 submersible pump single-phase for clear water or lightly loaded water . Power 1.10 kw. Used for draining, sewage pumping of cellars, wells, tanks...
FLYGT Steelinox SXM 5-7-11 submersible pump single-phase for clear water or lightly loaded water . Power : 0.55 kw, 0.75 kw and 1.10 kw. Used for draining, sewage pumping of cellars, wells, tanks...
FLYGT Steelinox SXM 5-7-11 submersible pump single-phase for clear water or lightly loaded water . Power : 0.55 kw, 0.75 kw and 1.10 kw. Used for draining, sewage pumping of cellars, wells, tanks...
Automatic submersible pump with float switch & 10 m cable HO7N-F, for clean water containing solids up to 10 mm grain size. Single phase or three-phase. Use for draining, emptying of drain well, emptying of tubewells.
GQR Calpeda submersible pump for domestic usage for pumping 30/m3/h maximum. Used for the draining and sump of pond, cistern, tank, cuve, pit for clear or slightly contaminated water. Or still, for the pumping of well or for recycling of rainwater. Suction until 10 mm of diameter of particles.
GQR Calpeda submersible pump for domestic usage for pumping 30/m3/h maximum. Used for the draining and sump of pond, cistern, tank, cuve, pit for clear or slightly contaminated water. Or still, for the pumping of well or for recycling of rainwater. Suction until 10 mm of diameter of particles.
LSC 1.4S PUMP - Ideal for complete drainage of flat surfaces where a sump is not available : rooftops, parking, garage, roadways underpasses, service utility pits, basements, plant maintenance cleanup, pools, and spas.
LSC 1.4S PUMP - Ideal for complete drainage of flat surfaces where a sump is not available : rooftops, parking, garage, roadways underpasses, service utility pits, basements, plant maintenance cleanup, pools, and spas.
Pompe de chantier en inox 304, pour le drainage d'eaux contenant du sable, de petit corps solides jusqu'à 8 mm, débit jusqu'à 18 m3/h, hauteur max 16 mètres, alimentation monophasé, puissance 1.10 Kw.