The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
The FLYGT 2600 is ideal for the pumping of loaded liquids with abrasive particles. Used for lowering of ground water levels , in mines, in construction, fire-fighting system... Available in power 1.1 to 5.6 Kw. Maximum flow from 40 to 140 m3/h.
This worksite pump is use for dewatering muddy waters, wells water, rainwater, agricultural waters, indistrual waters... Maximum flow rate to 66m3/h - Available in 2 models : single phase and three-phase.
DRENAG automatic submersible pump with float switch made of stainless steel, with thrust ring type impeller, for draining wastewater containing solids of maximum 10 mm diameter size.
DRENAG DAB drainage pump made of all stainless steel, declined in two models : 1000 et 1200W, in single phase version or three-phase - without float. Pumping and emptying of run off water, stagnant water of cellar, basement, subsurface and underfloor space flooded. But used for pumping and emptying of sump tank too.
FLYGT READY dewatering pump designed for full application of dewatering and pumping. READY pump is ideal for rapid response plan in case of flood. With its composition made of stainless steel, the READY pump is small, low weight & long life pump.
FLYGT Steelinox SXM 11 submersible pump single-phase for clear water or lightly loaded water . Power 1.10 kw. Used for draining, sewage pumping of cellars, wells, tanks...
FLYGT Steelinox SXM 5-7-11 submersible pump single-phase for clear water or lightly loaded water . Power : 0.55 kw, 0.75 kw and 1.10 kw. Used for draining, sewage pumping of cellars, wells, tanks...
FLYGT Steelinox SXM 5-7-11 submersible pump single-phase for clear water or lightly loaded water . Power : 0.55 kw, 0.75 kw and 1.10 kw. Used for draining, sewage pumping of cellars, wells, tanks...
HUNG KT worksite submersible pump for intensive use, like groundwater dewatering, pumping in mines and quarries, and construction site. Available power from 1.5 to 11kw. Maxi flow from 27 to 144m3/h.
Dewatering pump & worksite evacuation pump - 230V - Maxi flow rate : 23m3/h - Available from 0.40 to 0.75kw.
HYDRO 60 dewatering submersible pump : this worksite pump is used in public works or by the firefighters for their interventions in case of floods. Very high flow until 60 m3/h.
HYDRO INTERVENTION 10 - 15 is an electrical submersible pump for the firefighter interventions. Important flow until 40 m3/h. Used for the groundwater depletion, dewatering for clear or very slightly contaminated water, and for all type of interventions who needs a quickly pumping.
HYDRO INTERVENTION 20 - 30 is a dewatering submersible portatif pump for firefighter intervention. Important flow until 50 m3/h. Used for groundwater depletion and all types of interventions who needs a quickly pumping.
HYDRO INTERVENTION 20 - 30 is a dewatering submersible portatif pump for firefighter intervention. Important flow until 50 m3/h. Used for groundwater depletion and all types of interventions who needs a quickly pumping.
HYDRO INTERVENTION 20 - 30 is a dewatering submersible portatif pump for firefighter intervention. Important flow until 50 m3/h. Used for groundwater depletion and all types of interventions who needs a quickly pumping.
HYDRO INTERVENTION 20 - 30 is a dewatering submersible portatif pump for firefighter intervention. Important flow until 50 m3/h. Used for groundwater depletion and all types of interventions who needs a quickly pumping.
HYDROPOMPE 300 dewatering submersible used for all type of interventions : worksite, public works, firefighter. Flow very high until 250 m3/h. Use for dewatering of loaded water, back-up pump in case of flood. This pump is often used by firefighter, or still for pumping muds or drilling wastes (model 2600BP).
Tags