Cable

Whole of range of electric cables: for equipment of pump and special cable for drinking water.

Variable speed drives
Water pump control panel
Pressure switch
Pump automation
Float switch - Regulator of level
Motor protection circuit breaker
Cable
Coupling
Level regulator
Pressure control
Condensator
Solenoid valve
Pince batterie avec câble 2 m
2 to 3 days
Cable
4 mm² battery cable kit
005040
€22.08

€22.08 tax excl.

Delivery 2 to 3 days

Pair of 4 mm² battery cables, red and black, crimped with crocodile clips and round lugs, total length 2 metres.
H07RN-F electric cable
Cable
H07RN-F electric cable
H07RN-F cable have an hight flexibility and is very resistant to weather, thermal stresses, mechanical and with oils and greases. Ideal for the equipment of a pump.
View
Câble alimentaire immergeable
2 to 3 days
Cable
Submersible pump cable sold by meter
€6.83

€6.83 tax excl.

Delivery 2 to 3 days

These eletrical cables are ideal for supplying power to immersed pumps in direct contact with fresh water and sea water. Use for drinking water.
Showing 1-3 of 3 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

The right cable to power a pump

The cable connects the pump to its control panel or to its power source. It is chosen according to its cross-section, its length, its environment and, for a submersible pump, its resistance to immersion. This category offers flexible cables sold by the metre, a submersible cable and battery cables.

Selection criteria

  • Cross-section: it depends on the current and the length, in order to limit voltage drop.
  • Use: outdoors, permanent immersion or battery connection.
  • Number of conductors depending on single-phase or three-phase.

Frequently asked questions: Electric cables

How do I choose the cable cross-section?

It depends on the pump current, the cable length and the installation method. The longer the cable, the larger the cross-section needed. If in doubt, ask an electrician.

Can any cable be immersed?

No. For permanent immersion, use a cable designed for it, such as a submersible cable. A standard flexible cable is not always suitable; see the product page.

Are cables sold by the metre?

Flexible and submersible cables are sold cut to length: state the length needed when ordering, and allow some margin for the routing.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.