Accessories for lifting

We offer a wide range of accessories to complete your lift pump installation. These accessories are used on your installations: electrical control panel, hose reel, float switch, elbow. Used by private individuals, in agriculture and in all types of lifting installations, these tools make your systems very functional (remote control, start-up, automatic operation...).

Domestic pump
Dewatering pump
Domestic sewage pump
Septic pump
Sewage pump station - one pump
Sewage pump station - two pumps
Macerator pump
Corrosion resistant pump
Worksite pump
Accessories for lifting
Lifting micro-station
12/24V lifting pump
Dégrilleur avant fosse et station de relevage
Accessories for lifting
200 L screen filter for upstream of septic tank and lifting station
800339
The effluent enters the filter at the top and exits at the bottom; the inclined screen retains solids and objects larger than 50 mm, tank volume 200 L. The screen filter separates and removes solids and objects likely to clog installations, installed upstream of a lifting station or a digester settling tank.
View
Alimentation de secours 230V CombiMaster 3000VA
Water pump control panel
230V CombiMaster 3000VA backup power supply
008319
€4,228.33 Tax included

€4,228.33 tax excl.

Backup power supply for single-phase lift pump, up to 2.60 kw, automatic switching in the event of mains failure, the battery takes over, the converter provides an output voltage of 230V. Backup power supply for single-phase lift pumps, CombiMaster 24/3000-60, battery cut-off, 50mm² battery cables, 2 AGM 12/225 Ah batteries.
Coude 90° à visser F/F inox 316L
2 to 4 days
Stainless steel threaded connection
316L stainless steel 90° M/F elbow threaded
€3.00 Tax included

€3.00 tax excl.

Delivery 2 to 4 days

90° M/F elbow threaded made in 316L stainless steel. Male & female cylindric threaded BSP. Standard ISO 228/1, available in models : 1/2", 3/4", 1", 1" 1/4, 1" 1/2, 2", 2" 1/2, 3" & 4".
Tuyau PVC pour carburant OPAL FUEL
2 to 4 days
Flexible PVC hoses
Amazone super-elastic PVC hose 25m
€240.00 Tax included

€240.00 tax excl.

Delivery 2 to 4 days

Super elastic PVC hose, reinforced with a rigid spiral. For suction and delivery of waste water, slurry, fertilisers... Diameters available from 25 to 203 mm.
Interrupteur à flotteur eaux usées - eaux vannes AQUA XL Interrupteur à flotteur eaux usées - eaux vannes AQUA XL 2
2 to 4 days
Float switch - Regulator of level
AQUA XL level regulator all kings of water, with ballast built-in - 2 bars
€102.50 Tax included

€102.50 tax excl.

Delivery 2 to 4 days

AQUA XL level regulator with internal ballast. Adapted for application with slightly aggressive liquids with eventual grease layers on the surface : clean water, wastewater, sewage water, oils, mud or slightly aggressive liquids.
Raccord male à douille crantée Laiton
2 to 4 days
Barbed fitting
Brass male hose tail fitting
€6.50 Tax included

€6.50 tax excl.

Delivery 2 to 4 days

Barbed hose tail fitting for fitting onto flexible rubber and PVC hoses, tightened with a clamp, straight male threaded. Made of brass, long barb, professional quality.
Clapet anti retour à boule inox 316
2 to 3 days
Check valve - Stainer filter
BSP threaded ball check valve 316 stainless steel
€223.33 Tax included

€223.33 tax excl.

Delivery 2 to 3 days

Ball check valve with FPM coating, female/female threaded, all 316 stainless steel construction, available in 1" 1/4, 1" 1/2 and 2", vertical or horizontal mounting, for clear, dense and loaded liquids, for use with aggressive liquids and sea water.
Embase fonte pompe ZENIT
2 to 4 days
Accessories for lifting
Cast iron base plate for ZENIT pump - 9024.006
112524
€97.50 Tax included

€97.50 tax excl.

Delivery 2 to 4 days

Cast iron base with 3 arms for free-standing installation of ZENIT pump. (see model below).
Embase fonte pompe ZENIT
2 to 4 days
Accessories for lifting
Cast iron base plate for ZENIT pump - 9024.009
112526
€551.84 Tax included

€551.84 tax excl.

Delivery 2 to 4 days

Cast iron base with 4 arms for free-standing installation of ZENIT pump. (see model below).
Embase fonte pompe ZENIT
2 to 4 days
Accessories for lifting
Cast iron base plate for ZENIT pump - 9024.010
112523
€80.00 Tax included

€80.00 tax excl.

Delivery 2 to 4 days

Cast iron base with 3 arms for free-standing installation of ZENIT pump, (- DGO 150-200/2/G65V-65-80 - DGF 150-200/2/G65V-65-80).
Clapet anti-retour Fonte taraudé F/F
2 to 4 days
Check valve - Stainer filter
Cast iron check valve threaded F/F
€68.33 Tax included

€68.33 tax excl.

Delivery 2 to 4 days

Cast iron body, NBR-coated aluminium ball, with inspection hatch, horizontal or vertical mounting with upward flow. For use in water supply, distribution and drainage.
Coude en fonte à bride PN10 refoulement pompe
2 to 4 days
Accessories for lifting
Cast iron flanged elbow PN10 for pump delivery
€160.00 Tax included

€160.00 tax excl.

Delivery 2 to 4 days

Cast iron lift pump outlet elbow, standard PN10 flanged connection, available in DN65, DN150, DN200 and DN250, supplied with gaskets and A2 stainless steel bolts.
Alimentation de secours CombiMaster 12/2000-60
3 to 5 days
Water pump control panel
CombiMaster 2000VA 230V emergency power supply
€3,025.00 Tax included

€3,025.00 tax excl.

Delivery 3 to 5 days

Backup power supply for single-phase lift pump, up to 1.50 kw, automatic switching in the event of mains failure, the battery takes over, the converter provides an output voltage of 230V. Backup power supply for single-phase lift pumps, CombiMaster 12/2000-60 and CombiMaster 24/2000-60, battery cut-off, battery cables, AGM 12/160 Ah and 320 Ah battery.
Boitier de commande et protection pompe de relevage monophasé
Motor protection circuit breaker
Control and protection box for single-phase lift pump
To automate a single-phase lift pump, AT-120 float switch for agitated, clear, waste and loaded water, Schneider box with on/off button, thermal reset, power contactor + thermal protection relay, control by float switch in the tank.
View
Boitier de commande et protection pompe de relevage triphasé
2 to 4 days
Motor protection circuit breaker
Control and protection box for three-phase lift pump
€280.00 Tax included

€280.00 tax excl.

Delivery 2 to 4 days

Control and protection box for a three-phase lift pump from 0.55 Kw to 11.00 Kw, AT-120 float switch for agitated, clear, waste and loaded water, Schneider box with on/off button, thermal reset, power contactor + thermal protection relay, control by float switch in the tank.
Coffret de gestion 2 pompes QTLD 2D
2 to 4 days
Water pump control panel
Control panel for 2 lift pumps Single-phase QML/A 2D 12A-FA
008033
€662.50 Tax included

€662.50 tax excl.

Delivery 2 to 4 days

Control and protection panel for 2 single-phase lift pumps, adjustment from 1 to 12A. Allows alternating operation of the pumps, thermal protection.
Coffret de gestion 2 pompes QTLD 2D
2 to 4 days
Water pump control panel
Control panel for 2 lift pumps Three-phase QTLD 2D
008032
€717.50 Tax included

€717.50 tax excl.

Delivery 2 to 4 days

Control and protection panel for 2 three-phase lift pumps, adjustment from 1 to 12 A. Allows alternating operation of the pumps with two floats as well as simultaneous operation with three floats, thermal protection.
Coffret de gestion 2 pompes QTLD 2D
2 to 4 days
Water pump control panel
Control panel for lift pump (230V) QML/A 1D
008034
€500.83 Tax included

€500.83 tax excl.

Delivery 2 to 4 days

Control & protection panel for a single-phase lift pump, adjustment from 1 to 12 A. Automatic operation with 1 or 2 level floats + 1 alarm level float.
Coffret de gestion 2 pompes QTLD 2D
2 to 4 days
Water pump control panel
Control panel for lift pump (400V) QTLD 1D
008035
€550.00 Tax included

€550.00 tax excl.

Delivery 2 to 4 days

Control and protection panel for a three-phase lift pump, adjustment from 1 to 12 A. Automatic operation with 1 or 2 level floats + 1 alarm level float (high level, overflow).
Showing 1-24 of 67 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

Everything that completes a lifting pump or station

A lifting installation is more than just the pump. This category brings together the parts that make it reliable and automatic: valves, fittings, hoses and control panels for one or two pumps.

Common accessories

  • Ball check valves to stop water flowing back to the tank.
  • Hoses and fittings for the discharge line, in the right diameter.
  • Control panels to manage starting, levels and alarms.

Frequently asked questions: Lifting accessories

Why fit a non-return valve on the discharge?

It prevents water that has already been lifted from flowing back into the tank when the pump stops. Choose a valve suited to dirty water, in the right diameter.

How do I choose a control panel?

Check the number of pumps, the voltage (230 V or 400 V), the permitted power and whether there is an alarm. This information is on the product page.

Are accessories compatible with every pump?

Not always. Compare the diameters, threads and electrical characteristics of the accessory with those of your pump before ordering.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.