Three-phase multistage submersible pump, all 304 stainless steel construction, supplied with 20 m of cable. Available in powers from 0.45 to 1.50 Kw. Nominal flow 3 m3/h.
5" multistage stainless steel automatic submersible pumps. Easy to install, 1"1/4 discharge, compact and ready to use, with integrated pressure sensor and pressure transmitter for automatic start/stop control of the pump. E-MPSM pumps are used for water supply from wells, tanks or reservoirs.
Three-phase multistage submersible pump, all stainless steel 304 construction, supplied with 20 m of cable. Available in powers from 1.10 to 3.0 Kw. Nominal flow rate 9 m3/h.
Multistage single-phase submersible pump, all stainless steel 304 construction, supplied with 20 m of cable. Available in powers from 1.10 to 1.50 Kw. Nominal flow rate 9 m3/h.
CALPEDA MWSU 230V submersible rainwater pump unit. Full immersion pump in tank or cuve with dry-running protection and floating suction. Pump made in all stainless steel. Delivered with 15m power cable. Flow to 2 m3/h.
Pedrollo NKm 2 immersed pump 230V is ideal for wells. Without float switch. Maximum flow to 4.8m3/h.
Pedrollo NKm 2 immersed pump 230V is ideal for wells. Without float switch. Maximum flow to 4.8m3/h.
5" monobloc submersible pump (125DN), for wells, 6" boreholes, tanks, ponds; supplied with 20m of cable. Three-phase power supply 400V.
5" (DN125) monoblock submersible pump for wells, 6" boreholes, tanks, ponds. Delivered with 20m of cable, integrated capacitor, low water float. Single-phase power supply 230V.
5" (DN125) monoblock submersible pump for wells, 6" boreholes, tanks, ponds. Delivered with 20m of cable, integrated capacitor, low water float. Single-phase power supply 230V.
5" monobloc submersible pump (125DN), for wells, 6" boreholes, tanks, ponds; supplied with 20m of cable. Three-phase power supply 400V.
5" monobloc submersible pump (125DN), for wells, 6" boreholes, tanks, basins. Single-phase power supply-230V. The Scuba Dry 3SDCS version is equipped with a base to be placed at the bottom of the tank, an integrated capacitor, with float, 20 meters of cable with plug.
5" monobloc submersible pump (125DN), for wells, 6" boreholes, tanks, basins. Three-phase power supply - 400V. The Scuba Dry 3SDCS version is equipped with a base to be placed at the bottom of the tank, without float, with 20 m of cable, without plug.
5" monobloc submersible pump (125DN), for wells, 6" boreholes, tanks, basins. Single-phase 230V power supply. The Scuba Dry 5SDCS version is equipped with a base to be placed on the bottom of the tank, an integrated capacitor, with float, 20 meters of cable with plug.
5" monobloc submersible pump (125DN), for wells, 6" boreholes, tanks, basins. Three-phase power supply - 400V. The Scuba Dry 5SDCS version is equipped with a base for installation at the bottom of the tank, without float, with 20 m of cable, without plug.
Multistage submersible pump, maximum pressure to 4.2 bar, flow rate from 1 to 4.5 m3/h. This pump is suitable for domestic water supply from tanks or reservoirs or for deep wells. Using for drawing rain water from cisterns to water garden, and for irrigation systems too. Adapted for use with clean water. The float stop the power supply of the pump, when...