DSP fittings

DSP fittings (Hydraulics accessories): brands available: Triboulet. Products available at Pompes H2O, advice on +33 3 44 25 91 01.

Stainless steel threaded connection
Cut-off valve
Check valve - Stainer filter
Barbed fitting
Guillemin hose coupling
DSP fittings
Raccord GFR
Keyser fittings
Camlock fittings
Clamp fittings
DIN fittings
SMS fittings
Macon fittings
STORZ couplings
PERROT fittings
Express fittings
DECA brass coupling pipe
GEKA fittings
Snap-fit fittings
Lance - Spray gun
Fire valves
PVC pressure fittings
Flanges
Pressure gauge
Suspension pump accessories
Galvanised screw fittings
Threaded connection
Stainless steel braided hose - fuel hose
Sub-metering
Pressure reducer
Clamp hose
Sealing
Wall pass-through fittings
Couplings
Coude à 90° Aluminium DSP
2 to 4 days
DSP fittings
90° Aluminium DSP elbow
$141.52

$141.52 tax excl.

Delivery 2 to 4 days

90° Aluminium elbow, fitted with two locking fittings, DSP40 inlet and DSP40 outlet or DSP65 inlet and DSP65 outlet.
Robinet diffuseur type "B" Aluminium
2 to 3 days
Spray guns and valves
Aluminium type "B" jet diffuser valve
$71.69

$71.69 tax excl.

Delivery 2 to 3 days

It screws onto the end of aluminium lance barrels, or threaded tips of RIA/PIA, 3-position valve, with straight jet, jet diffused into an expanding sheet of water turning into rain. Available in DN20 and DN40.
Distributeur 3 voies Laiton DSP 40
2 to 4 days
Fire hose couplings
Brass DSP 40 3-way manifold
508372
$142.45

$142.45 tax excl.

Delivery 2 to 4 days

3-way manifold with equal 1" 1/2 female threads, made of Brass, with three DSP 40 locking fittings.
Robinet incendie de barrage Laiton Guillemin
2 to 4 days
DSP fittings
Brass shut-off valve with DSP40 couplings
113083
$161.08

$161.08 tax excl.

Delivery 2 to 4 days

Gate valve with wedge discs, fitted with a handwheel, opening 2 and 1/2 turns, with two DSP 40 ALU locking couplings.
Division 2 robinets DSP Division 2 robinets DSP 2
2 to 4 days
DSP fittings
Division 2 robinets DSP
$271.87

$271.87 tax excl.

Delivery 2 to 4 days

Manifold with two aluminium valves, connection (DSP40 - 2 x DSP40) or (DSP65 - 2 x DSP40).
Division 3 robinets DSP Division 3 robinets DSP 2
2 to 4 days
DSP fittings
Division 3 robinets DSP
151329
$537.23

$537.23 tax excl.

Delivery 2 to 4 days

Manifold with aluminium handwheels and three fire valves, DSP65 inlet, outlet 1 x DSP 65 + 2 x DSP40.
Fût de lance DSP Alu Fût de lance DSP Alu 2
2 to 4 days
DSP fittings
DSP aluminium lance barrel
$56.80

$56.80 tax excl.

Delivery 2 to 4 days

Aluminium lance barrel, without lock, DSP connection and threaded fitting, available in DN40 and DN65.
Demi raccord à douille annelée réduite DSP
2 to 4 days
DSP fittings
DSP half coupling with reduced barbed sleeve
$27.65

$27.65 tax excl.

Delivery 2 to 4 days

DSP 40 self-sealing symmetrical half coupling with reduced barbed end, 33, 35 and 38 mm sleeve, with lock. All models of the same diameter can be coupled together.
Bouchon à machoire sans verrou DSP
2 to 4 days
DSP fittings
DSP jaw plug without lock
$23.18

$23.18 tax excl.

Delivery 2 to 4 days

Jaw cap without lock, with chain, for DSP symmetrical couplings, available in diameters 40, 65 and 100.
Bouchon à verrou DSP
2 to 4 days
DSP fittings
DSP locking cap
$15.64

$15.64 tax excl.

Delivery 2 to 4 days

Cap for DSP couplings, locking model with chain, available in diameters 40, 65 and 100.
Demi raccord à verrou DSP femelle à visser
2 to 4 days
DSP fittings
DSP locking half coupling, female threaded
$31.75

$31.75 tax excl.

Delivery 2 to 4 days

DSP self-sealing half coupling, female threaded, with lock. All models of the same diameter can be coupled together. Available in DN40, DN65 and DN100. Aluminium construction, NBR gasket.
Demi raccord à verrou DSP fileté mâle
2 to 4 days
DSP fittings
DSP locking half coupling, male threaded
$25.88

$25.88 tax excl.

Delivery 2 to 4 days

DSP self-sealing half coupling, male threaded, with lock. All models of the same diameter can be coupled together. Available in DN40, DN65 and DN100. Aluminium construction, NBR gasket.
Transformation raccord Express vers DSP
2 to 3 days
DSP fittings
DSP to Express coupling conversion
$78.30

$78.30 tax excl.

Delivery 2 to 3 days

Conversion fitting from express coupling to DSP self-sealing coupling, made of aluminium and brass.
Réduction à verrou DSP-DSP
2 to 4 days
DSP fittings
DSP-DSP locking reducer
$70.76

$70.76 tax excl.

Delivery 2 to 4 days

Aluminium locking reducer DSP65 to DSP40, AR 100 to DSP 45 and AR 100 to DSP 65, with gaskets, PS 25 bar.
Vanne à opercule avec raccords DSP40-65 & AR100
  • New
3 to 5 days
Cut-off valve
DSP40-AR-GUILLEMIN fire-fighting gate valve
$147.11

$147.11 tax excl.

Delivery 3 to 5 days

Handwheel lenticular regulating valve for adjusting flow rate and pressure, one-piece gate valve, precise adjustment, no water hammer, for control of RIA and PIA, isolation of supply networks, water distribution, fire protection. Fitted with two aluminium fittings DSP40, DSP65 or AR100, symmetrical Guillemin DN40 to DN100.
Demi-raccord à douille annelée Guillemin ALU
3 to 5 days
DSP fittings
Hose tail half coupling DSP & AR
$15.92

$15.92 tax excl.

Delivery 3 to 5 days

DSP APM self-sealing symmetrical half-coupling with hose tail end and lock. All models of the same diameter can be coupled together. Available in DN40, DN65 and DN100. Aluminium construction, NBR gasket.
Raccord DSP mâle Raccord DSP mâle 2
2 to 3 days
DSP fittings
Threaded male half-coupling without lock - DSP40
$24.02

$24.02 tax excl.

Delivery 2 to 3 days

Half-coupling with male thread, without lock. DSP40 quick coupling, available in Aluminium DN40 male end 1"1/2 and 2" BSP threaded - Working pressure: 16 bar.
Showing 1-24 of 24 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

Locking couplings for fire-fighting equipment

DSP fittings are locking half-couplings used in France on hoses, engine-driven pumps, hydrants and dividing breechings of fire equipment. Two identical half-couplings join by rotation, without tools, with a gasket providing the seal. They come as hose-tail, female-threaded, male-threaded, blanking cap and dividing versions.

Elements of the range

  • Hose-tail half-coupling: fixed on the hose.
  • Female or male threaded half-coupling: screws onto a pump or a pipe.
  • Blanking cap: protects or closes an end.
  • Dividing breeching: splits a flow between several outlets.

Frequently asked questions: DSP fittings

How do I join two DSP couplings?

Present the two half-couplings with the gasket in place, then rotate them until they lock. Check the condition of the gasket and follow the manufacturer's manual.

How do I check compatibility?

Check the nominal diameter and the type of half-coupling before ordering. The product pages give the available diameters and compatible fittings.

What maintenance should be planned?

Regularly check the gaskets and the condition of the locks, and rinse the couplings after use. Replace any damaged gasket before putting the equipment back into service.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.