Hydraulics accessories

A whole large range of differents accessories hydraulic required for pump installations, and thier well-functioning : manometer, valve, check valve, stainer filter, pressure reducer, tap, couplings, pump suspension... in many materials.

Stainless steel threaded connection
Cut-off valve
Check valve - Stainer filter
Barbed fitting
Guillemin hose coupling
DSP fittings
Raccord GFR
Keyser fittings
Camlock fittings
Clamp fittings
DIN fittings
SMS fittings
Macon fittings
STORZ couplings
PERROT fittings
Express fittings
DECA brass coupling pipe
GEKA fittings
Snap-fit fittings
Lance - Spray gun
Fire valves
PVC pressure fittings
Flanges
Pressure gauge
Suspension pump accessories
Galvanised screw fittings
Threaded connection
Stainless steel braided hose - fuel hose
Sub-metering
Pressure reducer
Clamp hose
Sealing
Wall pass-through fittings
Couplings
Active filters
Fût de lance Femelle 3/4" BSP Bronze
2 to 3 days
Lance - Spray gun
3/4" BSP female bronze lance barrel
153213
$63.31

$63.31 tax excl.

Delivery 2 to 3 days

Bronze lance barrel M24X200 thread, length 160 mm, 3/4" BSP female stub. Weight 0.40 kg.
Demi raccord Guillemin mâle sans verrou Alu
2 to 3 days
Guillemin hose coupling
Aluminium Guillemin male half coupling without lock
$7.63

$7.63 tax excl.

Delivery 2 to 3 days

Guillemin male coupling, without lock, full range from DN20 to DN100, aluminium half coupling, without gasket, screw-on end.
Robinet diffuseur type "B" Aluminium
2 to 3 days
Spray guns and valves
Aluminium type "B" jet diffuser valve
$71.69

$71.69 tax excl.

Delivery 2 to 3 days

It screws onto the end of aluminium lance barrels, or threaded tips of RIA/PIA, 3-position valve, with straight jet, jet diffused into an expanding sheet of water turning into rain. Available in DN20 and DN40.
Robinet incendie de barrage
2 to 4 days
Cut-off valve
Brass fire-fighting shut-off valve
$89.38

$89.38 tax excl.

Delivery 2 to 4 days

Fire valve with inclined head, known as a "barrage" valve, fitted to the pipework of fixed fire-fighting installations, fitted with an operating handwheel.
Robinet incendie de barrage Laiton Guillemin
2 to 4 days
DSP fittings
Brass shut-off valve with DSP40 couplings
113083
$161.08

$161.08 tax excl.

Delivery 2 to 4 days

Gate valve with wedge discs, fitted with a handwheel, opening 2 and 1/2 turns, with two DSP 40 ALU locking couplings.
Division 2 robinets DSP Division 2 robinets DSP 2
2 to 4 days
DSP fittings
Division 2 robinets DSP
$271.87

$271.87 tax excl.

Delivery 2 to 4 days

Manifold with two aluminium valves, connection (DSP40 - 2 x DSP40) or (DSP65 - 2 x DSP40).
Division 2 robinets Guillemin ALU
2 to 4 days
Guillemin hose coupling
Division 2 robinets Guillemin ALU
$273.74

$273.74 tax excl.

Delivery 2 to 4 days

Manifold fitted with Guillemin symmetrical couplings, with 2 handwheel valves on the outlets. Aluminium construction, PS 16 bar, NBR gasket, without lock.
Division 3 robinets DSP Division 3 robinets DSP 2
2 to 4 days
DSP fittings
Division 3 robinets DSP
151329
$537.23

$537.23 tax excl.

Delivery 2 to 4 days

Manifold with aluminium handwheels and three fire valves, DSP65 inlet, outlet 1 x DSP 65 + 2 x DSP40.
Robinet prise double avec bouchons
2 to 4 days
Fire valves
Double outlet valve with caps
151369
$169.46

$169.46 tax excl.

Delivery 2 to 4 days

Double inlet for wet riser and dry riser, for fixed fire-fighting installations, to which the fire services connect their hoses, PN16.
Robinet incendie prise simple avec bouchon
Last items in stock
Fire valves
Dry and wet riser fire-fighting valve with single inlet
$79.14

$79.14 tax excl.

Last items in stock

Dry and wet riser valve, single inlet for wet riser and dry riser, for fixed fire-fighting installations to which the fire services connect their hoses.
Fût de lance DSP Alu Fût de lance DSP Alu 2
2 to 4 days
DSP fittings
DSP aluminium lance barrel
$56.80

$56.80 tax excl.

Delivery 2 to 4 days

Aluminium lance barrel, without lock, DSP connection and threaded fitting, available in DN40 and DN65.
Demi raccord à douille annelée réduite DSP
2 to 4 days
DSP fittings
DSP half coupling with reduced barbed sleeve
$27.65

$27.65 tax excl.

Delivery 2 to 4 days

DSP 40 self-sealing symmetrical half coupling with reduced barbed end, 33, 35 and 38 mm sleeve, with lock. All models of the same diameter can be coupled together.
Bouchon à machoire sans verrou DSP
2 to 4 days
DSP fittings
DSP jaw plug without lock
$23.18

$23.18 tax excl.

Delivery 2 to 4 days

Jaw cap without lock, with chain, for DSP symmetrical couplings, available in diameters 40, 65 and 100.
Bouchon à verrou DSP
2 to 4 days
DSP fittings
DSP locking cap
$15.64

$15.64 tax excl.

Delivery 2 to 4 days

Cap for DSP couplings, locking model with chain, available in diameters 40, 65 and 100.
Demi raccord à verrou DSP femelle à visser
2 to 4 days
DSP fittings
DSP locking half coupling, female threaded
$31.75

$31.75 tax excl.

Delivery 2 to 4 days

DSP self-sealing half coupling, female threaded, with lock. All models of the same diameter can be coupled together. Available in DN40, DN65 and DN100. Aluminium construction, NBR gasket.
Demi raccord à verrou DSP fileté mâle
2 to 4 days
DSP fittings
DSP locking half coupling, male threaded
$25.88

$25.88 tax excl.

Delivery 2 to 4 days

DSP self-sealing half coupling, male threaded, with lock. All models of the same diameter can be coupled together. Available in DN40, DN65 and DN100. Aluminium construction, NBR gasket.
Transformation raccord Express vers DSP
2 to 3 days
DSP fittings
DSP to Express coupling conversion
$78.30

$78.30 tax excl.

Delivery 2 to 3 days

Conversion fitting from express coupling to DSP self-sealing coupling, made of aluminium and brass.
Réduction à verrou DSP-DSP
2 to 4 days
DSP fittings
DSP-DSP locking reducer
$70.76

$70.76 tax excl.

Delivery 2 to 4 days

Aluminium locking reducer DSP65 to DSP40, AR 100 to DSP 45 and AR 100 to DSP 65, with gaskets, PS 25 bar.
Fût de lance incendie raccord express
2 to 3 days
Express fittings
Express bronze lance barrel
153212
$68.90

$68.90 tax excl.

Delivery 2 to 3 days

Bronze lance barrel M24X200 thread, length 160 mm, Express coupling stub. Weight 0.40 kg.
Raccord d'alimentation femelle
Last items in stock
Fire valves
Female dry riser supply fitting
$94.97

$94.97 tax excl.

Last items in stock

Supply fitting for dry riser, female connection, copper alloy construction, to NF standards.
Showing 1-24 of 42 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

Couplings, valves, check valves and meters

This category brings together couplings (threaded, Guillemin, Storz, DIN, SMS, Clamp, cam-lock...), valves and taps, check valves and strainers, pressure gauges, water meters, nozzles and pump mounting accessories.

Choosing the right coupling

  • Standard: the coupling must belong to the same system as your equipment (Guillemin, Storz, DIN...).
  • Diameter: nominal (DN) or thread in inches.
  • Material: stainless steel, brass, galvanised, PVC or polypropylene, according to the liquid.

Frequently asked questions: Hydraulic accessories

How do I know which coupling to choose?

Note the system (Guillemin, Storz, DIN, SMS, Clamp...) and the diameter of your existing equipment. Two different systems cannot be connected directly: you need an adapter.

What is the difference between a check valve and a strainer?

A check valve lets the liquid flow in one direction only and prevents backflow. A strainer filters impurities at the suction; a strainer with a foot valve combines both functions.

Which material should I choose for my liquid?

Stainless steel suits most liquids, including food products; brass suits water and air; PVC and polypropylene suit many chemicals. Check compatibility on the product page.

What is a pressure gauge used for?

It shows the pressure of the installation. It helps to set a pressure switch, check a pump and detect a blockage or a leak.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.