Guillemin hose coupling

The Guillemin coupling is a symmetrical system suited to a multitude of applications. Its success is mainly due to its design, which guarantees a perfectly identical coupling: the couplings connect by interlocking 4 helical ramps. For a better seal, a tricoise wrench can be used to tighten the locks. To be able to assemble them, one of the two couplings must have a lock.

Stainless steel threaded connection
Cut-off valve
Check valve - Stainer filter
Barbed fitting
Guillemin hose coupling
DSP fittings
Raccord GFR
Keyser fittings
Camlock fittings
Clamp fittings
DIN fittings
SMS fittings
Macon fittings
STORZ couplings
PERROT fittings
Express fittings
DECA brass coupling pipe
GEKA fittings
Snap-fit fittings
Lance - Spray gun
Fire valves
PVC pressure fittings
Flanges
Pressure gauge
Suspension pump accessories
Galvanised screw fittings
Threaded connection
Stainless steel braided hose - fuel hose
Sub-metering
Pressure reducer
Clamp hose
Sealing
Wall pass-through fittings
Couplings
Clé tricoise/polycoise 11 fonctions
2 to 3 days
Guillemin hose coupling
11-function tricoise/polycoise spanner
150787
£18.49

£18.49 tax excl.

Delivery 2 to 3 days

Multi-function spanner for Guillemin couplings, DSP, tightening of DN20 to DN100 couplings, opening of electrical and gas boxes, fire hydrants, door and window squares.
Coude à 90° Guillemin ALU Coude à 90° Guillemin ALU 2
  • New
3 to 5 days
Guillemin hose coupling
90° equal and reducing elbow Guillemin ALU
£121.40

£121.40 tax excl.

Delivery 3 to 5 days

90° elbow in red aluminium, with two symmetrical Guillemin couplings, assembled by us, equal or reduced elbow from DN40 to DN100, DN80 and DN100 available with 1 swivel coupling.
Demi raccord Guillemin mâle sans verrou Alu
2 to 3 days
Guillemin hose coupling
Aluminium Guillemin male half coupling without lock
£5.72

£5.72 tax excl.

Delivery 2 to 3 days

Guillemin male coupling, without lock, full range from DN20 to DN100, aluminium half coupling, without gasket, screw-on end.
Raccord tournant Aluminium M/F Raccord tournant Aluminium M/F 2
2 to 4 days
Guillemin hose coupling
Aluminium swivel fitting M/F
£61.40

£61.40 tax excl.

Delivery 2 to 4 days

Aluminium swivel fitting, male and female BSP, available in 2", 3" and 4".
Robinet diffuseur type "B" Aluminium
2 to 3 days
Spray guns and valves
Aluminium type "B" jet diffuser valve
£53.72

£53.72 tax excl.

Delivery 2 to 3 days

It screws onto the end of aluminium lance barrels, or threaded tips of RIA/PIA, 3-position valve, with straight jet, jet diffused into an expanding sheet of water turning into rain. Available in DN20 and DN40.
Kit clapet anti-retour eau claire avec raccords Guillemin
2 to 3 days
Guillemin hose coupling
Brass check valve with Guillemin couplings
£83.03

£83.03 tax excl.

Delivery 2 to 3 days

Brass check valve with double guidance, for perfect centring of the obturator, assembled with two male aluminium Guillemin half couplings with locking pins. Mainly used for clear water, diesel, fire-fighting, irrigation...
Robinet diffuseur Bronze type B
2 to 3 days
Guillemin hose coupling
Bronze type "B" jet diffuser valve
£61.40

£61.40 tax excl.

Delivery 2 to 3 days

3-position mixed diffuser jet valve intended to equip fire hose reels (RIA). Available in DN20 and DN40, bronze construction.
Raccord Guillemin Bronze à douille annelée à verrou Raccord Guillemin Bronze à douille annelée à verrou 2
5 to 8 days
Guillemin hose coupling
Bronze/Brass Guillemin barbed sleeve fitting
£30.84

£30.84 tax excl.

Delivery 5 to 8 days

Guillemin symmetrical half-coupling, locking type with ringed hose tail. Models of the same diameter can be coupled together. Available from DN20 to DN100, made of bronze.
Division 2 robinets Guillemin ALU
2 to 4 days
Guillemin hose coupling
Division 2 robinets Guillemin ALU
£205.12

£205.12 tax excl.

Delivery 2 to 4 days

Manifold fitted with Guillemin symmetrical couplings, with 2 handwheel valves on the outlets. Aluminium construction, PS 16 bar, NBR gasket, without lock.
Raccord d'alimentation femelle
Last items in stock
Fire valves
Female dry riser supply fitting
£71.16

£71.16 tax excl.

Last items in stock

Supply fitting for dry riser, female connection, copper alloy construction, to NF standards.
Lance incendie avec robinet jet diffuseur 3 positions ALU
2 to 3 days
Lance - Spray gun
Fire-fighting nozzle with 3-position diffuser jet valve ALU
£99.07

£99.07 tax excl.

Delivery 2 to 3 days

Aluminium mixed diffuser jet valve, with 3 positions, intended to equip RIA (fire hose reels), for fire prevention. Supplied with threaded conical barrel, symmetrical Guillemin DN20 or DSP DN40 connection.
Contrôleur débit et pression DN65 colonne sèche et humide Contrôleur débit et pression DN65 colonne sèche et humide 2
  • New
2 to 4 days
Fire hose couplings
Flow rate and pressure controller DN65-DN100 for fire hydrant
225365
£1,943.06

£1,943.06 tax excl.

Delivery 2 to 4 days

Flow meter and pressure gauge for fire hydrant, max flow rate 300 m3/h, max pressure 16 bar, surge pressure 25 bar. Model with carrying handle.
Fût de lance Guillemin Bronze
2 to 3 days
Guillemin hose coupling
Guillemin bronze lance barrel
£47.44

£47.44 tax excl.

Delivery 2 to 3 days

Bronze lance barrel, with Guillemin DN20 and DN40 coupling.
Showing 1-24 of 46 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

The Guillemin coupling

The Guillemin coupling is a quick-lock connection system, widespread in France for suction, delivery, irrigation and agricultural fire hoses. It comes as half-couplings, caps, reducers and adapters.

Choosing the right coupling

  • Diameter identical to that of the hose and the pump.
  • Material: aluminium, brass or stainless steel, according to the liquid.
  • Seal in good condition, for a lasting tight fit.

Frequently asked questions: Guillemin couplings

Is a Guillemin coupling compatible with a Storz coupling?

No, they are two different systems. To join them, use a dedicated adapter.

How do I choose the diameter?

Note the nominal diameter of your hose and your pump. Couplings come in several diameters: check the details on the product page.

When should the seal be replaced?

Replace the seal as soon as it is hardened, cracked or crushed: a worn seal lets air in at the suction and reduces the flow.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.