Immersed pump

Many models of submersible pumps for boreholes, with impellers and diffusers in stainless steel and Noryl or all in 304 or 316 stainless steel: the best Calpeda, Caprari, Grundfos, Lowara and Pedrollo borehole pumps, submersible pumps for 4" boreholes and larger, for wells, replacement motors, dry-run protection control panels, electric cables, stainless steel cables, equipped borehole heads, fittings, polyethylene pipes...

Clapet anti-retour F/F INOX 316
2 to 3 days
£25.12

£25.12 tax excl.

Delivery 2 to 3 days

Stainless steel 304 check valve stamped with spring female/female. Size to DN 1/4" to 2“1/2. Maximum pressure to 16 bars.
POMPES H2O boosting unit with 230 V connection submersible pump POMPES H2O boosting unit with 230 V connection submersible pump 2
3 to 5 days
£948.86

£948.86 tax excl.

Delivery 3 to 5 days

Equipment kit for borehole or well submersible pump, single-phase 230 V, from 0.37 to 2.20 Kw, with 1 bladder pressure tank fitted with a control panel and low-water management, pressure switch for automatic operation, stainless steel fittings.
POMPES H2O boosting unit with 230 V connection submersible pump POMPES H2O boosting unit with 230 V connection submersible pump 2
3 to 5 days
£1,067.46

£1,067.46 tax excl.

Delivery 3 to 5 days

Booster and connection kit for 1 three-phase submersible pump (0.37 to 300 Kw), borehole or well, with 1 bladder pressure tank fitted with a control panel and low-water management, pressure switch for automatic operation, equipment under the tank, PE fittings.
Kit surpresseur C2 Lite pompe monophasé/triphasé
2 to 4 days
£996.30

£996.30 tax excl.

Delivery 2 to 4 days

Booster set fitted for surface pump, borehole, well, single-phase or three-phase, the assembly consists of a C2 Lite tank, a stainless steel support, with XMP pressure switch, pressure gauge, 316 stainless steel check valve, 316 stainless steel ball valve, set of 316 stainless steel threaded fittings, with clamps to secure the assembly.
Kit flexible aspiration flottante
2 to 4 days
Suction & discharge kit and extension hose
£96.28

£96.28 tax excl.

Delivery 2 to 4 days

Corrugated PVC hose with straight fitting with barbed end, crimped with stainless steel ring, suction strainer with polyethylene float, food grade, available in inside diameter, 25 mm (1"), 32 mm (1" 1/4) and 40 mm (1" 1/2).
Filtre à sable eau de forage
1 to 2 weeks
£1,109.33

£1,109.33 tax excl.

Delivery 1 to 2 weeks

The FAS automatic monobloc sand filter, for use with water loaded with sand, mud and other suspended matter, with a very high clogging index, automatic backwashing and rinsing. Filter made of fibreglass-reinforced polyethylene, pre-programmed Fleck automatic valve, double filtration layer of flint of different grain sizes.
Variateur de vitesse pompe monophasé 230 V SPEEDBOX Variateur de vitesse pompe monophasé 230 V SPEEDBOX 2
2 to 3 days
£689.32

£689.32 tax excl.

Delivery 2 to 3 days

SPEEDBOX frequency drive, for single-phase 230 volt pump, wall-mounted installation, varies the motor speed according to use, while maintaining constant pressure, it provides control and protection of a pump against overcurrents and dry running. It can be installed individually or in a group of 2 pumps. 0-10 bar pressure sensor (supplied).
Tête de sortie forage inox Ø 200mm
2 to 4 days
Borehole and wells accessories
£113.03

£113.03 tax excl.

Delivery 2 to 4 days

Stainless steel borehole head, domed 304 stainless steel bottom, thickness 3 mm, Ø 200mm, with internal hook to hold the pump suspension cable. Available from 1" to 2".
Kit clapet
2 to 4 days
Borehole and wells accessories
508318
£58.61

£58.61 tax excl.

Delivery 2 to 4 days

The stainless steel check valve kit holds the water in the suction or discharge column.
Variateur de vitesse pompe triphasé 230 V SPEEDBOX Variateur de vitesse pompe triphasé 230 V SPEEDBOX 2
2 to 3 days
£706.06

£706.06 tax excl.

Delivery 2 to 3 days

Frequency drive for three-phase 230 V pump, wall-mounted installation, it varies the motor speed according to use, while maintaining constant pressure, it provides control and protection of a pump against overcurrents and dry running. It can be installed individually or in a group of two pumps. 0-10 bar pressure sensor (supplied).
Variateur de vitesse pompe triphasé 400 V SPEEDBOX Variateur de vitesse pompe triphasé 400 V SPEEDBOX 2
2 to 3 days
£751.41

£751.41 tax excl.

Delivery 2 to 3 days

SPEEDBOX frequency drive, for three-phase 400 V pump, wall-mounted installation, varies the motor speed according to use, while maintaining constant pressure, it provides control and protection of a pump against overcurrents and dry running. It can be installed individually or in a group of 2 pumps. 0-10 bar pressure sensor (supplied).
Kit surpresseur vitesse variable pour réservoir eau de pluie MXS-EMT
1 to 2 weeks
£2,965.18

£2,965.18 tax excl.

Delivery 1 to 2 weeks

All 304 stainless steel multistage submersible pump, with support allowing the pump to be positioned vertically at the bottom of the tank, floating suction to limit impurities and loaded water at the bottom of the tank. Complete installation, supplied with speed controller, diaphragm tank, set of threaded fittings, valve, 316 stainless steel check valve,...
Electrode
2 to 4 days
Level regulator
007010
£10.12

£10.12 tax excl.

Delivery 2 to 4 days

Water level electrode is a device for detect the level of water. Dimensions : 100 mm Ø 23 mm.
Boitier étanche démarrage pompe immergée
2 to 3 days
£53.72

£53.72 tax excl.

Delivery 2 to 3 days

Waterproof simple starter box for 4-wire submersible pump, with built-in pin capacitor, 2 cable glands, inlet and outlet, connection terminal block.
Showing 1-16 of 16 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

A submersible pump for a borehole, well or tank

A submersible pump works under water and pushes it to the surface. It suits boreholes, deep wells, tanks and rainwater reserves, where a surface pump can no longer draw water.

Selection criteria: diameter, depth and flow

  • Inner diameter of the borehole or well: the pump must fit with some clearance.
  • Depth of the water while pumping and discharge height: they set the head to cover.
  • Flow rate the borehole can supply without running dry, and the flow your use needs.

Power supply and pump protection

Depending on the model, the pump runs on single-phase or three-phase power. Plan a suitable control box and protection against dry running (probe or level controller) to avoid running the pump dry.

Which sub-category should you choose?

3" borehole pumps, 4" and 6" for a cased borehole; well pumps for wells, cisterns and water reserves; solar pumps; borehole pump kits; submersible motors, control boxes and borehole and well accessories. Guides: Choosing a submersible borehole pump and Calculating total dynamic head.

Frequently asked questions: Submersible pumps

Submersible or surface pump: how to choose?

A surface pump draws the water: it is limited by the suction height, only a few metres. Beyond that, or for a borehole or a deep well, choose a submersible pump, which pushes the water up from the bottom.

How do I choose a borehole pump?

Note the inner diameter of the borehole, the depth of the water while pumping and the flow the borehole can supply. The head to plan for adds the immersion depth, the discharge height and the friction losses.

Does a borehole have to be declared?

In France, a borehole or well for domestic use must be declared at the town hall. Ask the town hall for the form and the procedure.

What electrical equipment is needed?

Depending on the model, the submersible pump needs a control box or a capacitor, and protection against lack of water. The product page states the power supply (single-phase or three-phase) and the accessories required.

Can a borehole pump handle sand?

Borehole pumps are designed for clear water. Sand and particles wear the impellers and the motor quickly: if your borehole produces sand, choose a model suited to loaded water or have the borehole checked.

What is the difference between a borehole pump and a well pump?

A borehole pump is narrow (3, 4 or 6 inches) to fit in a cased borehole. A well pump is meant for wells, cisterns and water reserves, often of larger diameter. Always check the inner diameter of your structure and the depth of the water.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.