Dewatering pump

Rainwater flows to the low collecting point in the evacuation pump. The submersible pump insures the pumping from rainwater until recover rainwater tank, or to a stream, drain, wedge... Rainwater pumps are used for : > pumping of clear water, run-off water, infiltration water wells, pumping station water. > grey water draining (waster water from sink, soapy water, and low loaded water with polluted materials).

Submersible pump Calpeda GQR Submersible pump Calpeda GQR 2
2 to 4 days
€615.00

€615.00 tax excl.

Delivery 2 to 4 days

Automatic submersible pump with float switch & 10 m cable HO7N-F, for clean water containing solids up to 10 mm grain size. Single phase or three-phase. Use for draining, emptying of drain well, emptying of tubewells.
Submersible pump Calpeda GQR
3 to 5 days
€593.33

€593.33 tax excl.

Delivery 3 to 5 days

GQR Calpeda submersible pump for domestic usage for pumping 30 m3/h maximum. Used for the draining and sump of pond, cistern, tank, pit for clear or slightly contaminated water. Or still, for the pumping of well or for recycling of rainwater. Suction until 10 mm of diameter of particles.
Submersible pump Calpeda GQR
3 to 5 days
€601.67

€601.67 tax excl.

Delivery 3 to 5 days

GQR Calpeda submersible pump for domestic usage for pumping 30 m3/h maximum. Used for the draining and sump of pond, cistern, tank, pit for clear or slightly contaminated water. Or still, for the pumping of well or for recycling of rainwater. Suction until 10 mm of diameter of particles.
Pompe d'épuisement chantier SUPERDREN 150M
2 to 4 days
Worksite pump
215340
€1,350.00

€1,350.00 tax excl.

Delivery 2 to 4 days

Site pump in 304 stainless steel, for draining water containing sand, small solids up to 8 mm, flow rate up to 18 m3/h, max head 16 metres, single-phase supply, power 1.10 Kw.
Pompe de drainage inox GXR
2 to 4 days
€320.00

€320.00 tax excl.

Delivery 2 to 4 days

The GXR pump is intended for draining clean or slightly loaded water, as well as small-scale garden watering. Available in 0.25, 0.37 and 0.55 kW three-phase.
Pompe de drainage inox GXR
2 to 4 days
€320.83

€320.83 tax excl.

Delivery 2 to 4 days

The GXR pump is intended for draining clean or slightly loaded water, as well as small-scale garden watering. Available in 0.25, 0.37 and 0.55 Kw single-phase.
Kit pompe de relevage 0.45 Kw mono eau propre ou légèrement chargées
2 to 3 days
€425.00

€425.00 tax excl.

Delivery 2 to 3 days

Stainless steel pump kit, multi-purpose for run-off water, drainage, well catchment, cisterns, tank pumping, installation in narrow inspection chambers, sump emptying, storm water pits, watering, industry. Supplied with the 0.45 kW pump, 1 spiral PVC hose (length 5, 10, 20 or 30m) + 316 stainless steel fittings + adjustable magnetic float.
Pompe de drainage inox GXR
2 to 4 days
€313.33

€313.33 tax excl.

Delivery 2 to 4 days

The GXR pump is intended for draining clean or slightly loaded water, as well as emptying tanks and gravity watering. Magnetic level switch with 10m of cable. Available in 0.25, 0.37 and 0.55 kw single-phase.
Showing 1-8 of 8 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Drainage and dewatering pumps for worksites, excavations and loaded water

Dewatering pumps remove water from an excavation, a pond bottom, a worksite or a basement. Drainage pumps also handle continuous removal of seepage water. Models include single-phase (230 V) and three-phase versions, in stainless steel, with or without a level sensor.

What matters when choosing

  • Flow and head: performance curve on the product page.
  • Particle passage: clear, slightly loaded or loaded water.
  • Power supply: single-phase or three-phase, according to your installation.
  • Control: float or level sensor for automatic operation.

Frequently asked questions: Drainage and dewatering pumps

What is the difference between a drainage pump and a dewatering pump?

In practice the terms overlap. Dewatering empties a low point or an excavation; drainage removes seepage water continuously. Each product page states the model's use.

How do I size the pump?

Estimate the volume of water to remove and the time you want, then the discharge height and the hose length. Compare with the performance curve on the product page.

Can a dewatering pump run dry?

As a rule, no: cooling depends on the surrounding water, and dry running can damage the pump. Use a float or level sensor if the pump has to run on its own.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.