GQS 50-11 submersible pump with impeller Vortex

GQS 50-11 submersible pump with impeller Vortex

210178
Delivery 2 to 4 days
€741.67

€741.67 tax excl.

GQS 50-11 submersible pump with impeller Vortex - DN50 - for lifting of loaded liquids. Sold with or without float. Power 0.90kw - Single phase and three phase.

Model

Attributs
Image Ref. Model Unit price Avail. Buy
GQS 50-11 submersible pump with impeller Vortex
210178 230V (avec flotteur)
€741.67
Available
GQS 50-11 submersible pump with impeller Vortex
210179 230V (sans flotteur)
€731.67
Available
GQS 50-11 submersible pump with impeller Vortex
210177 400V (sans flotteur)
€733.33
Available
Total: 0,0
All prices with tax included.
Available Product is available
Out of stock Product is no longer in stock
Can be back-ordered Product is no in stock, but is allowed to be back-ordered
Description

Draining pump for waste water & loaded water. Passage 50mm maxi.

Caracteristics of GQS 50-11 pumps :
- Motor 0.90 Kw (mono & tri), dry motor 2900 rpm (continuous service) - Triple winding impregnation humidity-resistant - Insulation classe F - Level of protection IP X8 - Thermical protection and built-in capacitor for single phase models.
- Body pump and turbine made in cast iron - Stainless steel shaft 303
- Double mechanical seal in alumina ceramic/hard carbon/NBR in oil chamber
- Temperature of liquid until + 35°C
- Immersion depth : Mini : 273 mm / Maxi : 5 meters
- PH value between 6 et 11
- Passage in (mm) = 50

Model Ref
Power
(Kw)
Voltage
(V)
In
(A)		 Float Vertical
discharge
Cable
HO7RNF
Weight
(Kg)
GQS 50-11 SG 210 179 0.90 230 6.6 With 2" F 3G1 18
GQSM 50-11 210 178 0.90 230 6.6 Without 2" F  3G1 18
GQS 50-11 210 177 0.90 400 2.3 Without 2" F  4G1 16

 

Flow m3/h 0 3 6 9 12 15 18 21 24 27 30 33
l/min 0 50 100 150 200 250 300 350 400 450 500 550
GQS 50-11 H.M.T
(m)		 11 10.5 10 9.3 8.6 7.8 7 6.2 5.2 4.2 3 1.8

 

 

 

Product Details
Attachments
Comments
All product reviews comply with DIRECTIVE (EU) 2019/2161

You might also like

Kit de sortie pompe de relevage verticale
2 to 3 days
Accessories for lifting
Vertical outlet kit for lift pump, threaded
POMPES H2O
€146.67

€146.67 tax excl.

Delivery 2 to 3 days

Set for connecting a lift pump, vertical outlet, clear, waste and loaded water, available for lift pumps with 1" 1/4 to 3" outlet.
Customers who bought this product also bought:
Moteur FRANKLIN 4" monophasé sans connecteur
1 to 3 days
Submersible motor
FRANKLIN motor 4" three phase 400V with connector
€425.00

€425.00 tax excl.

Delivery 1 to 3 days

FRANKLIN motor 4" three phase 400V. 50Hertz for immersed pump. Delivery with connector on lead-in cable from 1.5m to 5m (to see table above). This model is made in stainless steel 304, if you want the model in stainless steel 316, contact us.
Suction pump kit with 7m hose & 1" connection
2 to 4 days
Suction & discharge kit and extension hose
Suction pump kit with 7m hose & 1" connection
€80.00

€80.00 tax excl.

Delivery 2 to 4 days

Pump and booster set suction hose, consisting of 7m of clear flexible PVC hose, reinforced with a high-quality steel spiral, DN25, 1" male and female brass barbed fittings, brass check valve and 1" stainless steel strainer. Kit suitable for suction of water and certain food liquids.
Raccord fileté mâle avec verrou Guillemin ALU
2 to 3 days
Guillemin hose coupling
Male threaded half coupling with lock - Guillemin Alu
€8.00

€8.00 tax excl.

Delivery 2 to 3 days

Symmetrical half coupling with male thread and lock. Guillemin quick coupling, Available in Aluminium from DN20 to DN150, male end, Thread: EN ISO 228-1 - Working pressure: 16 bar
Kit de refoulement 15m Rapide DN50 x 2"
2 to 4 days
Lay-flat delivery hoses
Roll-up layflat hose kit DN50 - PS 6 BAR
€104.17

€104.17 tax excl.

Delivery 2 to 4 days

Flat delivery hose, diameter 52 mm, double PVC layer, with symmetrical Guillemin DN50 couplings. Maximum delivery pressure 6 bar. Available in 10, 20, and 50 metres. Supplied unassembled.
Raccord male à douille crantée Laiton
2 to 4 days
Barbed fitting
Brass male hose tail fitting
€6.50

€6.50 tax excl.

Delivery 2 to 4 days

Barbed hose tail fitting for fitting onto flexible rubber and PVC hoses, tightened with a clamp, straight male threaded. Made of brass, long barb, professional quality.
Clapet à boule PVC à coller - Spécial relevage
2 to 3 days
Check valve - Stainer filter
PVC-U solvent-weld ball check valve - Special for lifting
€53.33

€53.33 tax excl.

Delivery 2 to 3 days

For lifting stations, lift pumps and delivery pumps in general, union fitting connection at the inlet, solvent-weld F/F, PVC-U body and ball, EPDM gasket, perfect tightness, screwed inspection hatch. Diameter available from 32 to 90 mm. Compliant with the standard for lifting stations NF EN 12050-4.
Vanne à sphère PVC 3 pièces F/F taraudées
1 to 3 days
Cut-off valve
PVC 3-piece valve F/F solvent-weld
€14.58

€14.58 tax excl.

Delivery 1 to 3 days

F/F solvent-weld ball valve, PVC-U body and ball, double EPDM gasket, full bore, available from DN25 to DN90.
Moteur FRANKLIN 4" monophasé sans connecteur
1 to 3 days
Submersible motor
FRANKLIN motor connector 4"
501011
€68.33

€68.33 tax excl.

Delivery 1 to 3 days

Tight connector for FRANKLIN motor 4", with 3 conductors 1.5mm² + earth cable.

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides