Automatic functioning set for surface pump 230V

Allows a bladder or diaphragm tank to be connected, for installations with a surface pump combined with a horizontal, spherical or in-line cylindrical tank.

Supplied as standard with a plug on the horizontal outlet of the 5-way fitting, allowing the pump to be mounted with a spherical or in-line cylindrical tank. For installations with a horizontal tank, the 1" horizontal outlet is connected to a hose.

Contents of the automatic control kit:
- 1 pressure switch 0-6 bar or 0-12 bar.
- 1 5-way fitting 1".
- 1 male plug 1".
- 1 non-return valve.
- 1 axial pressure gauge 0-6 or 0-12 bar.
- 2 equal nipples M/M 1".
- 1 equal socket F/F 1".
- 1 reducer M 1/2" x M 1/4".
- 1 equal socket F/F 1/4".
- 1 connecting cable from pressure switch to pump, length 1 metre pre-wired on the pressure switch.
- 1 power cable of  1.5 m pre-wired in 3G1.5 mm² HO7RN-F + moulded male standard plug.