Loaded water lifting station - Calpeda Calidom-PA 0.55 kW

Underground lifting station, in highly resistant polyethylene, with sealed lid with 3-point locking with triangle key. Working volume of the station (with factory float setting) = 70 litres.

Use:
- Lifting of all waste water from a dwelling of up to 20 people.

Composition of the lifting station:
- 1 buried tank in highly resistant polyethylene.
- 1 lift pump in special cast iron for loaded water (vortex impeller) supplied with 20 m of cable + 1 float for start/stop.
- 1 cast iron base foot + stainless steel guide bars.
- 1 isolating valve (with union fitting) in PVC Ø 63 mm for maintenance.
- 1 special waste water ball check valve in PVC Ø 63 mm.
- 1 nylon support rope Ø 8 mm.
- 1 rigid pipework (inside).
- 2 cable glands built into a recess for the power supply and the overflow
- station outlet kit Ø 63 mm comprising: 1 PVC fitting and 1 flexible hose + 2 compression fittings. Can be fitted to PVC or PEHD pipework.
- 1 male/female 45° elbow for PVC Ø 100.
- 1 lip seal to fit the Ø 100 inlet pipe, (hole to be drilled at Ø 108 mm).
- 1 lip seal for ventilation in Ø 50, (drilling to be made in Ø 60 mm).
- 1 male plug 230V.

Specifications:

Dimensions:

Performance: