€35.00 tax excl.
Delivery 1 to 3 days
€480.83 tax excl.
Submersible cast iron pump, for waste and loaded water from a small dwelling, basement drainage, lifting of loaded water with solids up to 30 mm, power 0.55 Kw single-phase, 1" 1/4 (DN32) outlet, max head 8 metres, max flow rate 13.5 m3/h.
Uses:
- For lifting waste water and loaded water from a small house.
- For lifting clear water, run-off water, basement drainage.
- Installation in a sump, lifting station, tank.
Specifications:
- Frame, pump body, cover, feet and impeller in cast iron.
- 316 stainless steel motor shaft.
- Mechanical seal in silicon carbide + lip seal ring.
- A2 stainless steel fasteners.
- Max number of starts per hour 20.
- IP 68 protection, class F insulation.
- Maximum pumped liquid temperature +50°C.
- pH of pumped liquid between 6 and 10.
- Max immersion depth 5 m.
- Density of the pumped liquid 1100 kg/m3.
- HO7RN-F electric cable, 10 metres, with 2P+T male plug (single-phase model).
- Capacitor built into a box separate from the pump.
| Model | PVX 75M |
|---|---|
| Reference | 210383 |
| Power (Kw) |
0.55 |
| Voltage (V) |
230 |
| Current (A) | 4.2 |
| Float switch | WITH |
| Max flow rate (m3/h) | 13.5 |
| Max. head (m) |
8 |
| Free passage (mm) |
30 |
| Discharge |
DN32 / 1" 1:4 female thread |
| Electric cable (m) | 10 |
| Weight (Kg) | 17 |
You might also like
Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).