€29.17 tax excl.
Delivery 2 to 4 days
The Enerbox 1300 unit rectifies 230 volt (50Hz) single-phase alternating current into 12 volt direct current, stored in a battery, then inverts the 12 volt direct current into 230 volt single-phase alternating current; battery autonomy is from 1 h to 4 h 00 (depending on model). Output power 600 watts, for a lift pump of 600 watts max. Integrated GSM module.
| Image | Ref. | Modèles | Unit price | Avail. | Buy |
|---|---|---|---|---|---|
|
008136 | (1) |
€1,408.33
|
|
|
|
008137 | (2) |
€2,054.17
|
|
|
|
008138 | (3) |
€2,273.33
|
|
|
|
008139 | (4) |
€2,592.50
|
|
|
|
Total:
0,0
All prices with tax included.
|
|||||
Product is available
Product is no longer in stock
Product is no in stock, but is allowed to be back-ordered
Reminder:
- The autonomy required in the event of a mains failure (power cut) must be at least 1 or 2 hours (in operation), in the event of rain, the pump runs for 1 minute every 6 minutes (approximately 10 minutes per hour).
Calculation of the catchment area in m² :
This is the sum of all the surfaces (terrace, roof, garage ramp, cellar, garage...) + other wet surfaces in m² = total catchment area in m².
Example: Roof of 120 m² + garage ramp 20 m² + 10 m2 of wet area, = 150 m²
Calculation of the pump flow rate in l/min:
This is the result of multiplying (catchment areas + 20% head losses) x 1.5 (K coefficient)
Example : Total area 150 m² + 20 % x 1.5 = 270 l/min
Specifications:
- ENERBOX 1300 supply, single-phase 230 V+/- 10 % 50 Hz.
- Battery voltage 24 Vdc.
- ENERBOX 1300 output, single-phase 230 V+/- 10 % 50 Hz.
- Pseudo-sinusoidal output wave (when running on battery).
- Efficiency 95%.
- Built-in GSM module.
- Automatic battery charger.
- STOP function when the battery voltage is depleted.
- Blue LED, output line power present and inverter running.
- Green LED, battery charged.
- White LED, battery charging.
- Red LED, battery depleted.
- Battery charge test button.
- Auxiliary protection fuse.
- Battery charger fuse.
- Battery fuse.
- Reverse polarity protection.
- Overload protection.
- Short-circuit protection.
- Overheating protection
- Control input contact, for float switch, start/stop, automatic pump operation.
- Alarm contact 12 Vdc (max 300 mA).
- Emergency stop switch.
- Multilingual installation.
- Output with cable support.
- Removable door.
- Box painted with epoxy.
- IP 31 protection.
- Operating temperature from -5 to + 40 °C, with maximum humidity 50% (non-condensing).
Composition:
- The Enerbox 1300 (reference 008136) is supplied alone, without battery.
- The Enerbox 1300, 1h00, 1h30, 2h00 and 2h30 are supplied with battery, battery cables, battery support and cable cover finishing accessory.
Options:
- DARK 1 box, for a lift pump with 2 float switches.
- DARK 2 box, for two lift pumps, with 3 float switches.
Operation:
- For one or two single-phase pumps without float switch.
Operation:
- For one or two single-phase pumps without float switch.
| Model | (1) | (2) | (3) | (4) |
|---|---|---|---|---|
| ENERBOX 1300 |
ENERBOX 1300 1h00 |
ENERBOX 1300 2h00 |
ENERBOX 1300 3h00 |
|
| Reference | 008136 | 008137 | 008138 | 008139 |
| Autonomy in continuous operation |
without battery | 1h00 | 2h00 | 3h00 |
| *Autonomy at 10 min per hour |
- | 6h00 | 12h00 | 18h00 |
| Power max. motor (W) |
600 | |||
| Current max. motor (A) |
4.8 | |||
| Power max (VA) |
1300 | |||
| Battery | without | 2 x 80 Ah | 2 x 100 Ah | 2 x 160 Ah |
| Battery type | - | traction battery | ||
| Weight (Kg) | 20.0 | 60.0 | 76.0 | 119.0 |
Reminder : * In the event of rain, the pump runs for 1 minute every 6 minutes (approximately 10 minutes per hour).
You might also like
Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).