Float switch - Regulator of level

Float switch is a device for the detection of level of liquid within a reservoir.

Variable speed drives
Water pump control panel
Pressure switch
Pump automation
Float switch - Regulator of level
Motor protection circuit breaker
Cable
Coupling
Level regulator
Pressure control
Condensator
Solenoid valve
Interrupteur à flotteur pour liquides agités AT 120
2 to 4 days
Float switch - Regulator of level
AT 120 float switch for agitated liquids
001418
€101.67

€101.67 tax excl.

Delivery 2 to 4 days

For use with agitated, clear, waste and loaded water, this float level switch (On/Off) allows direct automation of pumps (up to 1.5 HP) or unlimited via a contactor. Differential angle of 120°, which allows a smooth contact to be established, and allows both the high level and the low level to be detected in the same tank.
Interrupteur de niveau Eau potable
2 to 4 days
Float switch - Regulator of level
ATS 165 EP - ACS certified float level switch
€180.00

€180.00 tax excl.

Delivery 2 to 4 days

ATS 165 EP, ACS certified float level switch use in extremely agitated drinking water applications. Switching angle : + or - 165°. Maximum pressure : 3,5 bars
Interrupteur à flotteur pour pompe vide cale Interrupteur à flotteur pour pompe vide cale 2
2 to 3 days
Float switch - Regulator of level
Float switch for bilge pump
001405
€40.00

€40.00 tax excl.

Delivery 2 to 3 days

Float switch for 12 or 24 volt bilge pump, automatic pump operation according to the water level, starts at 55 mm and stops at 25 mm from the floor, max 10 amps, above that, use a relay.
SOBA EX certifié ATEX SOBA EX certifié ATEX 2
2 to 3 days
Float switch - Regulator of level
SOBA EX, ATEX certified level regulator for gas and dust environments
001381
€246.67

€246.67 tax excl.

Delivery 2 to 3 days

SOBA EX, ATEX certified level regulator for gas and dust environments, with external ballast. Applications : sewage water, charged liquids, oils, mud, paint, aggressive liquids...  - Maximum pressure : 4 bars - Switching angle + or - 25°.
Régulateur de niveau à flotteur pour acide, base, produits pétroliers - SOBA HR HY
2 to 3 days
Float switch - Regulator of level
SOBA HR HY regulator of level for aggressive liquids - 3.5 bars
001402
€229.17

€229.17 tax excl.

Delivery 2 to 3 days

SOBA HR HY omnidirectional regulator of level with double waterproof thanks encased in a HR HY (High Resistance) housing. Used for aggressive liquid : acids, solvents, corrosive liquids, hydrocarbons, sea water, etc. Allowed fluid density from 0,80 to 1,10. Maximum pressure : 3.5 bars. Switching angle + or - 25°.
Détecteur de niveau pour silo à grains Détecteur de niveau pour silo à grains 2
2 to 3 days
Float switch - Regulator of level
SOLIBA level detector for grain silo
001416
€150.83

€150.83 tax excl.

Delivery 2 to 3 days

For stopping the filling of storage areas or silos, operation by tilting +/- 10°, when the high level is reached during filling, the SOLIBA detector tilts and stops the filling. Cable length 10 metres.
Alarme cuve "trop plein" coffret 9V
2 to 4 days
Water pump control panel
Tank overflow alarm 230V/9V
€215.83

€215.83 tax excl.

Delivery 2 to 4 days

Can be fitted to all lifting units and lifting stations, high level float, tank overflow detection, remote fault signalling "lamp and buzzer". 230V supply, with 9V back-up.
Showing 1-10 of 10 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

Floats and regulators to control a pump by level

A float switch or level regulator starts or stops the pump when the liquid rises or falls in a sump, a pit, a tank or a pond. The contact is operated by the float position, which follows the liquid level.

Choosing by liquid and use

  • Type of liquid: clean water, loaded or waste water, drinking water, chemicals or hydrocarbons.
  • Float and cable material, compatible with the liquid.
  • Cable length and adjustment of the switching height.
  • Hazardous areas: some models are designed for this use; the product page gives the conditions.

Frequently asked questions: Level detection

Which float for waste water?

A regulator designed for loaded water, with a smooth body and often an integrated weight, reduces snagging. The product page states the liquid it accepts.

Can I use a float with drinking water?

Only models designed for drinking water should be used. Check the product page for the food-contact conformity mention and follow the manual.

Do acids or hydrocarbons need a specific model?

Yes: choose a regulator whose materials are compatible with the product. In an explosive atmosphere, use only a model designated for it and follow the manufacturer's instructions.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.