Float switch - Regulator of level

Float switch is a device for the detection of level of liquid within a reservoir.

Variable speed drives
Water pump control panel
Pressure switch
Pump automation
Float switch - Regulator of level
Motor protection circuit breaker
Cable
Coupling
Level regulator
Pressure control
Condensator
Solenoid valve
Régulateur de niveau vertical réglable AGMA W Régulateur de niveau vertical réglable AGMA W 2
2 to 4 days
Float switch - Regulator of level
AGMAW EVO vertical magnetic level controller
001414
€63.33

€63.33 tax excl.

Delivery 2 to 4 days

Level controller for a single-phase lift pump up to 1.50 Kw max, installation with clear, waste or loaded water pump, vertical mounting with two fixing holes, adjustable on/off differential, 5 to 15 cm, 3G1 mm² electric cable of 25 cm.
Boitier alarme sonore niveau cuve - SENTINEL Boitier alarme sonore niveau cuve - SENTINEL 2
Last items in stock
Float switch - Regulator of level
Audible tank overflow alarm unit - SENTINEL
008185
€71.67

€71.67 tax excl.

Last items in stock

Connected to a 2P+T power socket, and wired to a level switch placed in a tank, it activates a siren according to the liquid level, built-in buzzer, 9V backup battery (in the absence of power), fitted with an output relay with potential-free contacts, to activate a remote alarm signal.
Boitier de commande et protection pompe de relevage monophasé
Motor protection circuit breaker
Control and protection box for single-phase lift pump
To automate a single-phase lift pump, AT-120 float switch for agitated, clear, waste and loaded water, Schneider box with on/off button, thermal reset, power contactor + thermal protection relay, control by float switch in the tank.
View
Boitier de commande et protection pompe de relevage triphasé
2 to 4 days
Motor protection circuit breaker
Control and protection box for three-phase lift pump
€280.00

€280.00 tax excl.

Delivery 2 to 4 days

Control and protection box for a three-phase lift pump from 0.55 Kw to 11.00 Kw, AT-120 float switch for agitated, clear, waste and loaded water, Schneider box with on/off button, thermal reset, power contactor + thermal protection relay, control by float switch in the tank.
Interrupteur de niveau à flotteur BIP STOP Interrupteur de niveau à flotteur BIP STOP 2
2 to 3 days
Float switch - Regulator of level
FLO STOP float level switch for small pumps
€30.00

€30.00 tax excl.

Delivery 2 to 3 days

FLO STOP Float level switch for small pumps for application with slightly aggressive liquids, and highly appreciated in agitated liquids - Switching angle + or - 110º - Maximum pressure : 3,5 bars.
Float switch + 2P remote-control connection plug
2 to 4 days
Float switch - Regulator of level
Float switch + 2P remote-control connection plug
€66.67

€66.67 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Float switch + 2P remote-control connection plug
2 to 4 days
Recovery of rainwater
Float switch + 2P remote-control connection plug
€70.83

€70.83 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Float switch + 2P remote-control connection plug
2 to 4 days
Float switch - Regulator of level
Float switch + 2P remote-control connection plug
€66.67

€66.67 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Float switch + 2P remote-control connection plug
2 to 4 days
Float switch - Regulator of level
Float switch + 2P remote-control connection plug
€70.83

€70.83 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Interrupteur à flotteur pour pompe vide cale Interrupteur à flotteur pour pompe vide cale 2
2 to 3 days
Float switch - Regulator of level
Float switch for bilge pump
001405
€40.00

€40.00 tax excl.

Delivery 2 to 3 days

Float switch for 12 or 24 volt bilge pump, automatic pump operation according to the water level, starts at 55 mm and stops at 25 mm from the floor, max 10 amps, above that, use a relay.
Float switch fill / empty - Mac3 Float switch fill / empty - Mac3 2
2 to 4 days
Float switch - Regulator of level
Float switch Mac3 - fill / empty
€29.17

€29.17 tax excl.

Delivery 2 to 4 days

The Mac3 type floating switch is suitable for filling and emptying, sewage in shafts, tanks, basins or cisterns...
Alarme cuve trop plein avec réserve de marche - ALARM-TOP-FLOT Alarme cuve trop plein avec réserve de marche - ALARM-TOP-FLOT 2
2 to 3 days
Water pump control panel
Tank overflow alarm with battery backup - ALARME-TOP-FLOT
€209.17

€209.17 tax excl.

Delivery 2 to 3 days

High level detection panel for tank, lifting station, with power-on and alarm indicator lights, detection by a level float, 230 volt supply, 12V rechargeable battery, 90 dB buzzer, rotating beacon, alarm reset, alarm output contact, supplied with float switch and mains power cable.
Showing 1-12 of 12 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

Floats and regulators to control a pump by level

A float switch or level regulator starts or stops the pump when the liquid rises or falls in a sump, a pit, a tank or a pond. The contact is operated by the float position, which follows the liquid level.

Choosing by liquid and use

  • Type of liquid: clean water, loaded or waste water, drinking water, chemicals or hydrocarbons.
  • Float and cable material, compatible with the liquid.
  • Cable length and adjustment of the switching height.
  • Hazardous areas: some models are designed for this use; the product page gives the conditions.

Frequently asked questions: Level detection

Which float for waste water?

A regulator designed for loaded water, with a smooth body and often an integrated weight, reduces snagging. The product page states the liquid it accepts.

Can I use a float with drinking water?

Only models designed for drinking water should be used. Check the product page for the food-contact conformity mention and follow the manual.

Do acids or hydrocarbons need a specific model?

Yes: choose a regulator whose materials are compatible with the product. In an explosive atmosphere, use only a model designated for it and follow the manufacturer's instructions.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.