Float switch - Regulator of level

Float switch is a device for the detection of level of liquid within a reservoir.

Variable speed drives
Water pump control panel
Pressure switch
Pump automation
Float switch - Regulator of level
Motor protection circuit breaker
Cable
Coupling
Level regulator
Pressure control
Condensator
Solenoid valve
Régulateur de niveau vertical réglable AGMA W Régulateur de niveau vertical réglable AGMA W 2
2 to 4 days
Float switch - Regulator of level
AGMAW EVO vertical magnetic level controller
001414
€63.33

€63.33 tax excl.

Delivery 2 to 4 days

Level controller for a single-phase lift pump up to 1.50 Kw max, installation with clear, waste or loaded water pump, vertical mounting with two fixing holes, adjustable on/off differential, 5 to 15 cm, 3G1 mm² electric cable of 25 cm.
Interrupteur à flotteur ATEX Interrupteur à flotteur ATEX 2
2 to 4 days
Float switch - Regulator of level
ATEX float switch SUPERTEC EX
001411
€130.00

€130.00 tax excl.

Delivery 2 to 4 days

ATEX float switch, versatile for clean liquids, waste water and industrial water, switching angle +/- 45°, ATEX II 1G Ex ia IIC T6 compliant, double-layer float, pressure resistant.
Boitier alarme sonore niveau cuve - SENTINEL Boitier alarme sonore niveau cuve - SENTINEL 2
Last items in stock
Float switch - Regulator of level
Audible tank overflow alarm unit - SENTINEL
008185
€71.67

€71.67 tax excl.

Last items in stock

Connected to a 2P+T power socket, and wired to a level switch placed in a tank, it activates a siren according to the liquid level, built-in buzzer, 9V backup battery (in the absence of power), fitted with an output relay with potential-free contacts, to activate a remote alarm signal.
Interrupteur à flotteur pour pompe vide cale Interrupteur à flotteur pour pompe vide cale 2
2 to 3 days
Float switch - Regulator of level
Float switch for bilge pump
001405
€40.00

€40.00 tax excl.

Delivery 2 to 3 days

Float switch for 12 or 24 volt bilge pump, automatic pump operation according to the water level, starts at 55 mm and stops at 25 mm from the floor, max 10 amps, above that, use a relay.
Float switch fill / empty - Mac3 Float switch fill / empty - Mac3 2
2 to 4 days
Float switch - Regulator of level
Float switch Mac3 - fill / empty
€29.17

€29.17 tax excl.

Delivery 2 to 4 days

The Mac3 type floating switch is suitable for filling and emptying, sewage in shafts, tanks, basins or cisterns...
Détecteur de niveau ras du sol - CRAB Détecteur de niveau ras du sol - CRAB 2
2 to 4 days
Float switch - Regulator of level
Floor water detector
001412
€181.67

€181.67 tax excl.

Delivery 2 to 4 days

Placed on a flat surface, the CRAB detector can detect the presence of water on the floor from 3 mm, thanks to two low probes, suitable for single-phase lift pumps without float, low suction, supplied with 10 metre cable + remote control plug.
Interrupteur à flotteur universel FOX - G09
2 to 3 days
Float switch - Regulator of level
FOX - G09 universal float switch
001419
€60.83

€60.83 tax excl.

Delivery 2 to 3 days

The FOX - G09 float switch allows direct control of a single-phase lift pump up to 2.20 Kw, used for clear and waste water, activation angle 45°, max liquid temperature 70°C.
Interrupteur à flotteur eau potable " ACS " Interrupteur à flotteur eau potable " ACS " 2
2 to 3 days
Float switch - Regulator of level
Supertec ACS float switch for drinking water
001407
€95.83

€95.83 tax excl.

Delivery 2 to 3 days

Round polypropylene body, AD8 3X1 cable, ACS approved, switching angle 45°, 8A max for one motor, 220-240 volts, 10 metre cable.
Interrupteur à flotteur eaux chargées - vannes TAURUS
2 to 3 days
Float switch - Regulator of level
TAURUS level regulator for loaded water and sewage
001335
€90.00

€90.00 tax excl.

Delivery 2 to 3 days

Level regulator with triple watertight chamber, with built-in ballast, for waste water, loaded water, industrial water and lifting stations, switching angle of 20°, (very precise level detection). Available with 10 metre electric cable.
Showing 1-9 of 9 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

Floats and regulators to control a pump by level

A float switch or level regulator starts or stops the pump when the liquid rises or falls in a sump, a pit, a tank or a pond. The contact is operated by the float position, which follows the liquid level.

Choosing by liquid and use

  • Type of liquid: clean water, loaded or waste water, drinking water, chemicals or hydrocarbons.
  • Float and cable material, compatible with the liquid.
  • Cable length and adjustment of the switching height.
  • Hazardous areas: some models are designed for this use; the product page gives the conditions.

Frequently asked questions: Level detection

Which float for waste water?

A regulator designed for loaded water, with a smooth body and often an integrated weight, reduces snagging. The product page states the liquid it accepts.

Can I use a float with drinking water?

Only models designed for drinking water should be used. Check the product page for the food-contact conformity mention and follow the manual.

Do acids or hydrocarbons need a specific model?

Yes: choose a regulator whose materials are compatible with the product. In an explosive atmosphere, use only a model designated for it and follow the manufacturer's instructions.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.