Lift pump

Submersible lift pumps for waste water, loaded water, rainwater, sand-laden water, aggressive liquids, thick liquids, ATEX lift pumps, construction site pumps, as well as accessories for lift pump installations, such as base stands, guide rails, float switches and level regulators, Piezo probe, control panels, overflow alarms, pipes, lift pump outlet kits, non-return valves, galvanised cast iron fittings, pressure PVC, 316 stainless steel.

Domestic pump
Dewatering pump
Domestic sewage pump
Septic pump
Sewage pump station - one pump
Sewage pump station - two pumps
Macerator pump
Corrosion resistant pump
Worksite pump
Accessories for lifting
Lifting micro-station
12/24V lifting pump
Raccord male à douille crantée Laiton
2 to 4 days
Barbed fitting
Brass male hose tail fitting
£5.44

£5.44 tax excl.

Delivery 2 to 4 days

Barbed hose tail fitting for fitting onto flexible rubber and PVC hoses, tightened with a clamp, straight male threaded. Made of brass, long barb, professional quality.
Coffret d'alarme niveau haut avec transmetteur GSM
2 to 4 days
Water pump control panel
Pump GSM alarm panel
008158
£438.85

£438.85 tax excl.

Delivery 2 to 4 days

GSM panel, 230vac, 2 digital inputs, 1 relay output wall mounting, antenna and internal battery included. Use as tank overflow alarm, alarm reporting or pump control.
Coffret de gestion pompe de relevage 230/400V Coffret de gestion pompe de relevage 230/400V 2
2 to 4 days
Water pump control panel
V2B 230/400V control panel for 2 lift pumps
008039
£596.52

£596.52 tax excl.

Delivery 2 to 4 days

V2B control and protection panel for 2 lift pumps (up to 5.5 Kw at 400V / 3.00 Kw at 230V), with automatic pump changeover, possibility of connecting 2, 3 or 4 switches or regulators.
Coffret de commande et protection 2 pompes de relevage mono avec flotteur intégré Coffret de commande et protection 2 pompes de relevage mono avec flotteur intégré 2
2 to 3 days
Water pump control panel
V2MB control panel for 2 lift pumps
007114
£297.22

£297.22 tax excl.

Delivery 2 to 3 days

Control and protection panel for 2 single-phase 230 VAC lift pumps with integrated float switches (pump rating from 1A to 12A). The V2MB offers 2 operating modes as well as an overflow level function. The detailed and illustrated installation manual ensures a simple and quick installation.
Coffret de gestion pompe de relevage 230/400V Coffret de gestion pompe de relevage 230/400V 2
2 to 4 days
Water pump control panel
VIGILEC V1B 230/400V lift pump control panel
008038
£440.94

£440.94 tax excl.

Delivery 2 to 4 days

V1B control and protection panel, for 1 lift pump up to 5.5 Kw three-phase and 3.0 Kw single-phase, operation with 2 or 3 float level switches or regulators.
Showing 1-5 of 5 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

How to choose a lift pump

Three criteria guide the choice: the type of water to be removed, the flow rate you need and the discharge head. A lift pump moves clean, loaded or waste water to a higher or more distant point: sewer, ditch, sump or tank.

Clean water, loaded water, waste water: the right model

  • Clean water (flooded cellar, rainwater, draining): cellar drainage pump or drainage pump.
  • Loaded water (light mud, building sites): pump with a wide free passage or a vortex impeller.
  • Waste water (toilets, kitchen, basement): sewage pump, lift station with tank, or grinder pump.

Which category should you choose?

For a detailed comparison: Choosing a lift pump.

Accessories for a lift installation

Complete the pump with a non-return valve, a float or level detector, a control panel, a high-level alarm and a mounting base. These accessories are available in the lift accessories and control panels categories of the shop.

Frequently asked questions: Lift pumps

What is the difference between a cellar pump, a loaded-water pump and a sewage pump?

A cellar or drainage pump removes clear or lightly loaded water (flooded cellar, sump, rainwater). A loaded-water pump lets suspended particles pass (light mud, fine gravel). A sewage pump has a large free passage for the solids found in domestic waste water. Each product page gives the free passage, i.e. the maximum particle size the pump accepts.

When should I choose a grinder pump?

A grinder pump removes the waste of a toilet, washbasin or shower installed below the level of the sewer (basement, extension). It grinds the solids and pushes them through a small-diameter pipe over a significant height or distance. Follow the manufacturer's instructions for connection and discharge.

How do I choose the flow rate and the head?

The total head is the vertical height to climb, plus the friction losses in pipes and bends. Choose a pump whose performance curve gives at least the flow you need at that head, and keep a margin. A pipe that is too long or too narrow reduces the real flow noticeably.

Do I need a non-return valve and an alarm?

A non-return valve on the discharge pipe stops water from flowing back into the tank each time the pump stops. A high-level alarm warns you of a failure or a blockage before the tank overflows.

Single-phase or three-phase: which power supply?

Small and medium pumps run on single-phase 230 V, like a household socket. High-power pumps (public bodies, industry, lift stations) are available in three-phase 400 V. 12 V and 24 V models also exist for mobile installations.

Lift pump or lift station?

A submersible pump placed at the low point is enough to empty a cellar from time to time. As soon as drainage is permanent (sanitary fittings, kitchen or a basement room), you install a lift station: a sealed tank, one or more pumps, a level control and a non-return valve. Two pumps take turns and keep the service running if one fails.

Which pump for a basement bathroom?

For the water from toilets, shower and washbasin: a sewage pump, a macerator pump or a lifting micro-station with built-in grinder, depending on the discharge point. Check the free passage and the discharge diameter on the product page. The detail is in the guide Choosing a lift pump.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.