JARDINOX 50L stainless steel water booster set

Ideal for water supply from a tank, for boosting the pressure of a drinking water, rainwater, borehole water, well water or pure water network... In aggressive, corrosive environments, or those at risk of humidity or condensation. Very robust set fitted with a STAINLESS STEEL jet pump, a horizontal 304 STAINLESS STEEL tank, 10 BAR, (food grade), all-304 stainless steel disc check valve, XMP 0-6 BAR pressure switch, stainless steel pressure gauge, M/F 304 stainless steel hose, 316 stainless steel valve, and a set of 316 stainless steel threaded fittings..

Uses:
- Suction from a raw water tank fed by a borehole, (we recommend 1 100µ ± strainer filter on the suction side).
- Pumping from a mains water break tank, disconnection tank, drinking water tank.
- Booster set for housing, small-scale irrigation, sanitary block, drinking troughs...
- Booster set for aggressive environments or those presenting corrosion risks.
- Booster set for industrial kitchens, pharmaceutical and cosmetics laboratories...

Electrical specifications:
- 2-pole induction motor, 50Hz (n = 2900 rpm).
- NGXM: single-phase 230 V ± 10%, with thermal protection.
- Protection rating: IP 54
- Insulation class F.

Pump hydraulic specifications:
- Single-stage self-priming jet pump with built-in ejector.
- Pump body and cover in AISI 304 stainless steel.
- Shaft in AISI 430 stainless steel.
- Brass impeller.
- Diffuser and ejector in NORYL PRO-GF20.
- Hard carbon - Ceramic - NBR mechanical seal.

Tank hydraulic specifications:
- Food-grade tank with replaceable bladder.
- Capacity 60L.
- Made of AISI 304 STAINLESS STEEL.
- Butyl EPDM bladder, for drinking water.
- Pump support in AISI 304 STAINLESS STEEL.
- 1" male threaded outlet..

Composition:
- 1 304 stainless steel bladder pressure tank, horizontal 50L with pump support plate, food-grade tank, PS: 10bar.
- 1 single-phase electric pump, self-priming stainless steel JET 0.55 or 0.75 kW - CALPEDA NGXM (see table below).
- 1 XMP Telemecanique pressure switch 0-6 bar.
- 1 axial pressure gauge 0-6 bar, stainless steel case and glycerine bath.
- 1 1" 316 stainless steel cross.
- 1 M/F 1" stainless steel connecting hose, length 700mm, 304 stainless steel.
- 1 M/F 1" ball valve, 316 stainless steel.
- 1 90° 1" elbow, 316 stainless steel.
- 2 M/M nipples, 316 stainless steel.
- 1 M/M reducer, 316 stainless steel
- 1 1" non-return valve, 304 stainless steel.
- A2 - A4 stainless steel screws and fixings.
- HO7RN-F 3G1.5 mm² cable, length 5 m.
- Standard moulded 2P+T (CE) plug.
- Assembled and wired by us.
- 2-year warranty.