TELLARINI ALM reversible transfer pump in stainless steel 230V

TELLARINI ALM reversible transfer pump in stainless steel 230V

605248
Delivery 1 to 2 weeks
€356.67

€356.67 tax excl.

Self-priming pump made in stainless steel, single-phase 230V, side-channel. This pump is efficience for pumping and transfer of food liquids, oenology, chimical liquids...

Garniture mécanique

Attributs
Image Ref. Garniture mécanique Unit price Avail. Buy
TELLARINI ALM reversible transfer pump in stainless steel 230V
605248 Cer.-Grafite-NBR
€356.67
Available
TELLARINI ALM reversible transfer pump in stainless steel 230V
605703 Cer.-Grafite-Epdm
€385.00
Available
TELLARINI ALM reversible transfer pump in stainless steel 230V
605704 Cer.-Grafite-Viton
€385.00
Available
Total: 0,0
All prices with tax included.
Available Product is available
Out of stock Product is no longer in stock
Can be back-ordered Product is no in stock, but is allowed to be back-ordered
Description

Self-priming pump in stainless steel, side-channel. Used for suction and transfer of corrosive liquids (aggressive chimical liquids, chimical fertilizer, seawater), food liquids (milk, wine, oil, fruit  juice). Can work in batchwise mode with liquid present in suction. Flow rate can be inversed by an electric inverser.

 

 

 

 

 

 

 

 

Characteristics of ALM self-priming transfer pump single-phase :
- Pump housing, turbine and shaft in stainless steel AISI 316.
- Asynchronous motor single-phase (ALM), with inverter of flow direction + cable.
- Mechanical seal ceramic/graphite/VITON.
- Temperature of liquid until +90°C.
- Temperature room until +40°C.
- Maxi. density : 1.1g/m3.
- Alternative current.

- Maxi. suction heighter : 6 m

Flow of ALM pump / Total discharge heighter (TDH) in meter
  Height
(m)		 1m 5m 10m 15m 20m 30m Maxi.
discharge
heighter (m)
                 
ALM 20   26 24 17 12 10   23
ALM 25 Flow
(L)
→
 43 28 8 - - - 12
ALM 30 89 80 70 59 48 26 42
ALM 40 137 112 76 24  - - 17
ALM 50 205 176 140 104  69  - 29
1 m3/h (1000 liters per hour) = 16.66 l/min (16.66 liters per minute)





 

 

 

 

 

Product Details
Attachments
Comments
All product reviews comply with DIRECTIVE (EU) 2019/2161

You might also like

Raccord droit cannelé long à écrou tournant inox 316 Raccord droit cannelé long à écrou tournant inox 316 2
2 to 4 days
Barbed fitting
Straight fitting, long barbed end, 316 stainless steel swivel nut
€27.67

€27.67 tax excl.

Delivery 2 to 4 days

Straight barbed fitting with 316 stainless steel swivel nut, for use on the suction and delivery of stainless steel pumps, for drinking water supply, food liquid transfer, cylindrical threaded hexagonal nut, long barbed end.
Kit garniture mécanique Viton pompe ALM/ALT
2 to 4 days
Tellarini spare parts
Viton mechanical seal kit for AL pump
TELLARINI
€75.83

€75.83 tax excl.

Delivery 2 to 4 days

Stainless steel pump seal kit, consisting of the body O-ring gasket, the ceramic/graphite/Viton mechanical seal, and the shaft lip seal with stainless steel spring. Seal replacement on ALM, ALT, AL 12/24 pumps. Max temperature 130° C.
Kit garniture mécanique NBR pompe ALM/ALT
2 to 4 days
Tellarini spare parts
NBR mechanical seal kit for AL pump
TELLARINI
€52.50

€52.50 tax excl.

Delivery 2 to 4 days

Stainless steel pump seal kit, consisting of the body O-ring gasket, the ceramic/graphite/NBR mechanical seal, and the shaft lip seal with stainless steel spring. Seal replacement on ALM, ALT, AL 12/24 pumps. Max temperature 90° C.
Chariot inox pour pompe AL
2 to 4 days
Liquid ring self priming pumps
Stainless steel trolley for AL pump
TELLARINI
606312
€126.67

€126.67 tax excl.

Delivery 2 to 4 days

Transport trolley for Tellarini pump, ALM, ALT and AL series (12/24V), for contact with food products, resists aggressive environments.
Customers who bought this product also bought:
Vanne égal encliquetable Plasson tube PE - DN20 à DN32 Vanne égal encliquetable Plasson tube PE - DN20 à DN32 2
2 to 3 days
Snap-fit fittings
Plasson push-fit equal valve for PE pipe - DN20 to DN32
€19.58

€19.58 tax excl.

Delivery 2 to 3 days

The Plasson push-fit equal valve offers you an unrivalled guarantee of connection, mechanical fittings intended for joining polyethylene pipe, used in water supply systems carrying drinking water and water for general use at temperatures less than or equal to 40°C, available from DN20 to DN32.
Coffret de commande et protection 1 pompe de relevage - ECO-DRAIN Coffret de commande et protection 1 pompe de relevage - ECO-DRAIN 2
2 to 3 days
Water pump control panel
Single-phase lift pump control panel with float
008129
€338.33

€338.33 tax excl.

Delivery 2 to 3 days

Control and protection for a lift pump with or without integrated float, with integrated audible alarm for tank overflow, run-on reserve, single-phase model, integrated thermal protection, overload, underload, phase failure, rotor lock.
Pompe de drainage inox GXR
2 to 4 days
Dewatering pump
Stainless steel basement drainage pump GXRM (single-phase)
€320.83

€320.83 tax excl.

Delivery 2 to 4 days

The GXR pump is intended for draining clean or slightly loaded water, as well as small-scale garden watering. Available in 0.25, 0.37 and 0.55 Kw single-phase.
Vanne sphérique 3 pièces à brides GN40 Vanne sphérique 3 pièces à brides GN40 2
1 to 3 days
Cut-off valve
3 pieces stainless steel (316) ball valve F/F PN63
€40.00

€40.00 tax excl.

Delivery 1 to 3 days

3 pieces stainless steel (316) ball valve F/F PN63 for all common fluids. From DN 8 to DN 100. Maximum pressure 63 bars.
Filtre equerre fileté/fileté DIN Inox 304
2 to 3 days
DIN fittings
DIN25 M/M angle filter 304 stainless steel
€392.50

€392.50 tax excl.

Delivery 2 to 3 days

90° angle filter with threaded / male threaded ends DIN 25, filtration screen of 100, 200 and 300 microns (other mesh sizes on request), made entirely of 304L stainless steel. This product is DIN 11851 certified for use in the food and chemical industries. Withstands a pressure of 22 bar.
Raccord droit femelle polypropylène tube PE - PN16
2 to 4 days
Couplings
Polypropylene PN16 straight female threaded fitting
€2.50

€2.50 tax excl.

Delivery 2 to 4 days

Straight female fitting, parallel thread, in polypropylene for PE tube, external tightening of the tube on a Nylon ring, NBR gasket. ACS quality.
Raccord cannelé à écrou tournant inox 316L
2 to 3 days
Barbed fitting
Stainless steel 316 barbed fitting with swivel nut
€14.67

€14.67 tax excl.

Delivery 2 to 3 days

Flexible hose connecting fitting, with barbed end and swivel nut with flat PTFE gasket, fitting entirely machined in 316 stainless steel. Available from 1/2" diameter up to 4".
Clapet anti-retour PVC-U à ressort inox 316
2 to 3 days
Check valve - Stainer filter
PVC-U check valve with 316 stainless steel spring
€30.83

€30.83 tax excl.

Delivery 2 to 3 days

PVC-U check valve with 316 stainless steel spring, double union solvent-weld connection, EPDM gasket, maximum pressure 16 bar at 20°C, available in diameters 40, 50 and 63.

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides