€12.17 tax excl.
Delivery 3 to 5 days
€35.00 tax excl.
Read the 9 reviews
The LP 3 reverse pressure switch cuts the power supply to the pump when the pressure drops below the set value, between 0.5 and 1.8 bar, two-pole, 16A max.
Operation:
- The pump stops (opening of the contactor contacts) as soon as the pressure drops below the set value. (Low-water protection / dry-running protection).
- Resetting is automatic or by pressing the reset button.
- In an installation with a bladder pressure tank, it is connected in series with the pressure switch.
Specifications:
- Double-pole contact normally closed.
- Terminals with M4 screws and 8x8 mm pressure pad.
- Food-grade NBR rubber diaphragm with fabric reinforcement.
- ¼" hydraulic connection in zinc-plated steel.
- Standard protection rating IP 44.
- Strain-relief cable gland.
| Model | LP 3 |
| Reference | 001219 |
| Rated voltage (V) | 250 |
| Number of poles | 2 |
| Max pressure (bar) | 1.8 |
| Operating range (bar) | 0.5 - 1.8 |
| Factory pre-setting max - min (bar) | 1.5 - 0.5 |
| Connection | 1/4" female |
| Protection rating | IP 44 |
(7)
(0)
(2)
(0)
(0)
(0)
Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).