Electrics accessories

Essential electrical accessories for connecting pump installations, pumping stations, lifting stations...

Variable speed drives
Water pump control panel
Pressure switch
Pump automation
Float switch - Regulator of level
Motor protection circuit breaker
Cable
Coupling
Level regulator
Pressure control
Condensator
Solenoid valve
Interrupteur à flotteur pour liquides agités AT 120
2 to 4 days
Float switch - Regulator of level
AT 120 float switch for agitated liquids
001418
$113.59

$113.59 tax excl.

Delivery 2 to 4 days

For use with agitated, clear, waste and loaded water, this float level switch (On/Off) allows direct automation of pumps (up to 1.5 HP) or unlimited via a contactor. Differential angle of 120°, which allows a smooth contact to be established, and allows both the high level and the low level to be detected in the same tank.
Interrupteur de niveau Eau potable
2 to 4 days
Float switch - Regulator of level
ATS 165 EP - ACS certified float level switch
$201.11

$201.11 tax excl.

Delivery 2 to 4 days

ATS 165 EP, ACS certified float level switch use in extremely agitated drinking water applications. Switching angle : + or - 165°. Maximum pressure : 3,5 bars
Presse étouple platique Legrand PG
2 to 3 days
Motor protection circuit breaker
Legrand PG IP68 plastic cable gland
$3.72

$3.72 tax excl.

Delivery 2 to 3 days

IP68 plastic cable gland, supplied with surface gasket and hexagonal nut, available in several sizes.
SOBA EX certifié ATEX SOBA EX certifié ATEX 2
2 to 3 days
Float switch - Regulator of level
SOBA EX, ATEX certified level regulator for gas and dust environments
001381
$275.60

$275.60 tax excl.

Delivery 2 to 3 days

SOBA EX, ATEX certified level regulator for gas and dust environments, with external ballast. Applications : sewage water, charged liquids, oils, mud, paint, aggressive liquids...  - Maximum pressure : 4 bars - Switching angle + or - 25°.
Régulateur de niveau à flotteur pour acide, base, produits pétroliers - SOBA HR HY
2 to 3 days
Float switch - Regulator of level
SOBA HR HY regulator of level for aggressive liquids - 3.5 bars
001402
$256.05

$256.05 tax excl.

Delivery 2 to 3 days

SOBA HR HY omnidirectional regulator of level with double waterproof thanks encased in a HR HY (High Resistance) housing. Used for aggressive liquid : acids, solvents, corrosive liquids, hydrocarbons, sea water, etc. Allowed fluid density from 0,80 to 1,10. Maximum pressure : 3.5 bars. Switching angle + or - 25°.
Détecteur de niveau pour silo à grains Détecteur de niveau pour silo à grains 2
2 to 3 days
Float switch - Regulator of level
SOLIBA level detector for grain silo
001416
$168.53

$168.53 tax excl.

Delivery 2 to 3 days

For stopping the filling of storage areas or silos, operation by tilting +/- 10°, when the high level is reached during filling, the SOLIBA detector tilts and stops the filling. Cable length 10 metres.
Showing 1-11 of 11 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

The electrical equipment for your pumps

Control panels, variable speed drives, pressure switches, motor protection, floats and level detectors, capacitors, cables and solenoid valves: everything that controls and protects a pump.

Selection criteria

  • Power supply: single-phase 230 V or three-phase 400 V.
  • Power or current of the motor, shown on its rating plate.
  • Function: starting, protection, pressure control or level control.

Frequently asked questions: Electrical accessories

How do I choose a control panel?

Choose it according to the power supply (single-phase or three-phase), the power or current of the motor and the number of pumps to control. Panels for two pumps alternate their operation.

What is a pressure switch used for?

It starts and stops the pump according to the pressure of the network: it opens at high pressure and closes at low pressure. Its thresholds are set according to your installation.

Variable speed drive: what is the benefit?

It adjusts the motor speed to the demand: steady pressure, fewer starts, soft start and controlled energy use. Check that it matches the voltage and the power of your motor.

Float or level probe?

A float is simple and cheap for starting and stopping a lift pump. A probe or level controller allows finer settings and protects against dry running.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.