Dewatering pump

Rainwater flows to the low collecting point in the evacuation pump. The submersible pump insures the pumping from rainwater until recover rainwater tank, or to a stream, drain, wedge... Rainwater pumps are used for : > pumping of clear water, run-off water, infiltration water wells, pumping station water. > grey water draining (waster water from sink, soapy water, and low loaded water with polluted materials).

Active filters
HYDRO INTERVENTION 20 - 30 dewatering submersible pump
3 to 5 days
€1,650.00

€1,650.00 tax excl.

Delivery 3 to 5 days

The Tsurumi KTV pump series are very light and easy to handle. Applications: pumping of muddy water, sandy water, heavily loaded water, waste water, quarry water, building sites, industrial water, mines, public works... 400V power supply.
LSC 1.4S puddle sucker pump drainage
2 to 4 days
€1,275.00

€1,275.00 tax excl.

Delivery 2 to 4 days

LSC 1.4S PUMP - Ideal for complete drainage of flat surfaces where a sump is not available : rooftops, parking, garage, roadways underpasses, service utility pits, basements, plant maintenance cleanup, pools, and spas.
LSC 1.4S puddle sucker pump drainage
2 to 4 days
€826.67

€826.67 tax excl.

Delivery 2 to 4 days

LSC 1.4S PUMP - Ideal for complete drainage of flat surfaces where a sump is not available : rooftops, parking, garage, roadways underpasses, service utility pits, basements, plant maintenance cleanup, pools, and spas.
HYDRO INTERVENTION 20 - 30 dewatering submersible pump
2 to 4 days
€646.67

€646.67 tax excl.

Delivery 2 to 4 days

Single-phase lift pump with agitator. Ideal for draining excavations, pumping muddy site water and sand-laden drainage water, and for emptying sumps, basins and ponds, groundwater lowering, rainwater drainage and run-off water. Solids passage Ø max 7mm. Lift up to 10 m max, flow rate up to 12.4 m3/h.
Pompe de chantier portable TSURUMI HS2-75S
2 to 4 days
€823.33

€823.33 tax excl.

Delivery 2 to 4 days

Drying and draining of puddles, of liquids loaded with mud, sand, or solids up to Ø 7mm max, which require fast pumping. Flow rate up to 13.8 m3/h
HYDRO INTERVENTION 20 - 30 dewatering submersible pump
2 to 4 days
Worksite pump
215015
€890.00

€890.00 tax excl.

Delivery 2 to 4 days

Portable pump for drying and draining of puddles, of liquids loaded with mud, which require fast pumping. Flow rate up to 13.8 m3/h
HUNG KT dewatering worksite pump
2 to 3 days
€2,858.33

€2,858.33 tax excl.

Delivery 2 to 3 days

Cast iron submersible pump, pumping triggered by a level probe built into the pump, for use with water loaded with mud, sand, groundwater, waste water. Powers available from 1.5 to 3.7 Kw. For use in the most difficult drainage and dewatering work.
Tsurumi LB submersible dewatering pump 480A-800A Tsurumi LB submersible dewatering pump 480A-800A 2
2 to 4 days
€1,080.00

€1,080.00 tax excl.

Delivery 2 to 4 days

Submersible pump with semi-vortex impellers, in-built level sensor, automatic start & stop, for dewatering of working water, agriculture, industry, worksite... Models from 0.48kw to 0.75kw.
Pompe submersible en Titane Tsurumi TM2 Pompe submersible en Titane Tsurumi TM2 2
10 to 15 days
€1,908.33

€1,908.33 tax excl.

Delivery 10 to 15 days

Submersible pump in titanium and synthetic resin, for lifting seawater and corrosive liquids, available in 0.40 kW and 0.75 kW, also in automatic version with integrated sensor.
Showing 1-9 of 9 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Drainage and dewatering pumps for worksites, excavations and loaded water

Dewatering pumps remove water from an excavation, a pond bottom, a worksite or a basement. Drainage pumps also handle continuous removal of seepage water. Models include single-phase (230 V) and three-phase versions, in stainless steel, with or without a level sensor.

What matters when choosing

  • Flow and head: performance curve on the product page.
  • Particle passage: clear, slightly loaded or loaded water.
  • Power supply: single-phase or three-phase, according to your installation.
  • Control: float or level sensor for automatic operation.

Frequently asked questions: Drainage and dewatering pumps

What is the difference between a drainage pump and a dewatering pump?

In practice the terms overlap. Dewatering empties a low point or an excavation; drainage removes seepage water continuously. Each product page states the model's use.

How do I size the pump?

Estimate the volume of water to remove and the time you want, then the discharge height and the hose length. Compare with the performance curve on the product page.

Can a dewatering pump run dry?

As a rule, no: cooling depends on the surrounding water, and dry running can damage the pump. Use a float or level sensor if the pump has to run on its own.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.