Corrosion resistant pump

We offer a wide range of high quality pumps for corrosive liquids. These are submersible sewage pumps for clear or lightly loaded liquids, designed for pumping extremely corrosive liquids, chemical liquids, leachate pumping, pumping in saline environments such as sea water. These pumps are very often used in the pharmaceutical industry, water environment, agriculture, fish farming...
We are at your disposal to determine your needs. Depending on the model, the pumps are made of bronze or stainless steel 304, have more developed equipment such as strainers, floats and have a higher or lower flow capacity and the capacity to absorb liquids of varying density.

Domestic pump
Dewatering pump
Domestic sewage pump
Septic pump
Sewage pump station - one pump
Sewage pump station - two pumps
Macerator pump
Corrosion resistant pump
Worksite pump
Accessories for lifting
Lifting micro-station
12/24V lifting pump
Pompe de relevage liquides chimiques et corrosifs - DGX (tri) Pompe de relevage liquides chimiques et corrosifs - DGX (tri) 2
4 to 6 weeks
Corrosion resistant pump
316 stainless steel lift pump for loaded liquids DGX T
$2,411.49

$2,411.49 tax excl.

Delivery 4 to 6 weeks

Vortex impeller pump, all 316 stainless steel construction, able to operate in submerged mode, designed for lifting filtered, extremely corrosive or aggressive liquids. Vertical DN50 outlet, three-phase supply, power from 0.37 to 1.50 Kw.
Pompe de relevage pour liquides chimiques et corrosifs - DRX Pompe de relevage pour liquides chimiques et corrosifs - DRX 2
4 to 6 weeks
Corrosion resistant pump
316 stainless steel lift pump for slightly loaded liquids DRX M/A
$2,411.49

$2,411.49 tax excl.

Delivery 4 to 6 weeks

Submersible pump all 316 stainless steel, for clear or slightly loaded liquids, designed for pumping extremely corrosive liquids, chemical liquids, leachate pumping, pumping in saline environments. Single-phase 230 volt supply, pump fitted with a float.
Pompe de relevage liquides chimiques et corrosifs - DRX (tri) Pompe de relevage liquides chimiques et corrosifs - DRX (tri) 2
4 to 6 weeks
Corrosion resistant pump
316 stainless steel lift pump for slightly loaded liquids DRX T
$2,364.94

$2,364.94 tax excl.

Delivery 4 to 6 weeks

Submersible pump all 316 stainless steel, for clear or slightly loaded liquids, designed for pumping extremely corrosive liquids, chemical liquids, leachate pumping, pumping in saline environments. Three-phase 400 volt supply.
Pompe de relevage vortex inox 316 liquides chimiques chargées
  • New
3 to 4 weeks
Corrosion resistant pump
316 stainless steel vortex lift pump for loaded chemical liquids
$1,620.08

$1,620.08 tax excl.

Delivery 3 to 4 weeks

Submersible pumps for loaded water that is particularly corrosive, food liquids, chemical, pharmaceutical, galvanic, textile, tannery and metallurgical industries.
Pompe submersible en Bronze DRB
4 to 6 weeks
Corrosion resistant pump
Bronze lift pump for slightly loaded liquids DRB M
$2,309.07

$2,309.07 tax excl.

Delivery 4 to 6 weeks

Submersible pump all B10 bronze, for clear or slightly loaded liquids, designed for pumping aggressive filtered chemical liquids, dyes, sea water, used in the leather industry and the marine sector. Single-phase 230 volt supply.
Pompe de relevage liquides chimiques et eau de mer DRB (tri)
4 to 6 weeks
Corrosion resistant pump
Bronze lift pump for slightly loaded liquids DRB T
$2,290.45

$2,290.45 tax excl.

Delivery 4 to 6 weeks

Submersible pump all B10 bronze, for clear or slightly loaded liquids, designed for pumping aggressive filtered chemical liquids, dyes, sea water, used in the leather industry and the marine sector. Three-phase supply, available from 0.37 to 1.50 Kw.
Pompe de relevage en Bronze à roue vortex DGB
4 to 6 weeks
Corrosion resistant pump
DGB M/A bronze lift pump for loaded liquids
$2,821.17

$2,821.17 tax excl.

Delivery 4 to 6 weeks

Bronze lift pump with Vortex impeller for loaded liquids and sea water / Single-phase / with M/A float switch / Power 0.55 Kw and 1.10 Kw.
Pompe de relevage en Bronze liquides légèrement chargées DRB M/A
1 to 2 weeks
Corrosion resistant pump
DRB M/A bronze lift pump for slightly loaded liquids
$2,811.86

$2,811.86 tax excl.

Delivery 1 to 2 weeks

Submersible bronze lift pump for slightly loaded liquids, for sea water, for pumping certain chemical liquids and dyes, for use in the leather industry and the marine sector. Single-phase 230 volt power supply, with starter box and M/A float switch.
Pompe submersible en inox Tsurumi SQ Pompe submersible en inox Tsurumi SQ 2
10 to 15 days
Corrosion resistant pump
Stainless steel 304 submersible pump Tsurumi SQ
$2,076.30

$2,076.30 tax excl.

Delivery 10 to 15 days

Pumping of slightly corrosive liquids and food-grade liquids, the Tsurumi SQ pump is made entirely of 304 stainless steel, available in 0.40 kW and 0.75 kW.
Pompe submersible en inox 316 Tsurumi SFQ Pompe submersible en inox 316 Tsurumi SFQ 2
4 to 6 weeks
Corrosion resistant pump
Stainless steel 316 lift pump for slightly loaded liquids DRX M
$2,383.56

$2,383.56 tax excl.

Delivery 4 to 6 weeks

Submersible pump made entirely of 316 stainless steel, for clear or slightly loaded liquids, designed for pumping extremely corrosive liquids, chemical liquids, leachate pumping, pumping in saline environments. 230 volt single-phase supply.
Pompe submersible en Titane Tsurumi TM2 Pompe submersible en Titane Tsurumi TM2 2
10 to 15 days
Dewatering pump
Tsurumi TM titanium submersible pump
$2,132.17

$2,132.17 tax excl.

Delivery 10 to 15 days

Submersible pump in titanium and synthetic resin, for lifting seawater and corrosive liquids, available in 0.40 kW and 0.75 kW, also in automatic version with integrated sensor.
Showing 1-11 of 11 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

Materials chosen to withstand the pumped liquid

A pump for corrosive liquids is made from resistant materials: 304 or 316 stainless steel, bronze, titanium. It is used to lift or transfer aggressive or saline water and liquids carrying products that would attack ordinary cast iron or plastic.

Choosing the right material

  • Nature of the liquid, its concentration and its temperature.
  • Chemical compatibility of the pump body, impeller and seals.
  • Liquid load: lightly loaded or loaded, depending on the model.

Frequently asked questions: Pumps for corrosive liquids

Stainless steel, bronze or titanium: how to choose?

It all depends on the liquid. There is no universal material: check compatibility with your product with the manufacturer before ordering.

Do seals matter as much as the pump body?

Yes. Seals and gaskets must also resist the liquid. The product page gives their material; if in doubt, ask for advice before buying.

What precautions should I take when using it?

Wear the protection required by the product handled, rinse the pump if the manufacturer recommends it, and follow its instructions for use and for disposal of the liquid.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.