CALPEDA 4SM 35 submersible borehole pump kit 4" with variable speed drives kit - 230V 3.5 m3/h Expand

CALPEDA 4SM 35 submersible borehole pump kit 4" with variable speed drives kit - 230V 3.5 m3/h

CALPEDA CALPEDA

New

Complete pump kit for 4" drilling, with variable flow from 1.5 m3/h to 3.5 m3/h, for use in constant pressure. Ready to use, provides with food cable, variable speed drives kit + accessories of mouting.

More details

Less than 5 days

1 510,00 €

tax incl.

More info

The variable speed drives start-up the pump when taps are open, and it stop the pump when the tap are off. The flow is variable depending usage, but the pressure stay constant. Esay setting of variable speed (drop-down menu), View of status on LCD screen. The variable speed protect the pump against : dry-running, over current, and under or over voltage.

Usage :
- from 1.5 to 3.5 m3/h with total discharge heighter until 116 m.
- for clean liquid, quantity of sand in water to 100 g per pumped m3.
- temperature of pumped liquid from 0 °C to + 35 °C.
- start-up per hour : maximum 20 at regular intervals.

Installation :
- in 4" cased wellbore.
- in tank, cisterne (horizontal position in cooling jacket). To see accessoires in submersible pump range.

Advantage :
- complete kit, ready to use.
- don't need big tank (8L).
- work without electric control unit and dry-running protection.
- only one setting  = designated pressure.
- the constant pressure enable an high flexible operating.
- no water hammer possible.
- efficiency of engine enable saving energy.
- high life pump.

Characteristic of 4SM hydraulic pump :
- Immerged pump with radial turbines.
- Turbine and diffusors in NORYL
- Body pump, body stages, head of pump, suction lantern and screws in stainless steel 304.
- Shaft in stainless steel 430.
- Sand slinger (abrasion-resistant), very high résistant.
- Connection flange with in-built strainer in technopolymer.
- In-built non-return valve in plastic.
- Standard norme (CE).

Characteristic of motor :
- Encapsulated submersible motor, asynchronous, 2 poles (2900 tr/min) three-phase 230V.
- Complete in stainless steel AISI 304.
- Rotor designed to axial loads.
- Maximum start-up nomber to 20/h.
- Indice of protection : IP 68.
- Classe : B.
- Continuous service.
 
Composition of kits :
- 1 submersible pump 4" (0.55 kw, 0.75 kw, 1.10 kw or 1.50 kw), with cable.
- 1 ACS electic cable in food quality : PBS-R (to see tabe below).
- 1 waterpproof junction box.
- 1 EASYMAT 7.5 M/T variable speed drives.
- 1 Pressure transmitter on plug + liaison cable of varable speed drives.
- 1 Support of variable speed drives in stainless steel.
- 1 Collector in stainless steel.
- 1 Bladder tank to 8L.
- 1 Pressure gauge.
- 1 Ball valve.
- 1 Power cable connector, with standard plug 2+Earth.
- 2 Right connects for PE 32.
- 1 Elbow sleeve 90° for PE 32.

 
- The waterproof junction is do by us.

 

Model 4SM 35/7
K-EASYFOR E15
4SM 35/10
K-EASYFOR E30
4SM 35/15
K-EASYFOR E40
4SM 35/20
K-EASYFOR E60
Reference 508090 508091 508092 508093
Voltage (V) 230 single-phase
Motor voltage (V) 3 x 230
Motor power (kw) 0.55 0.75 1.10 1.50
Asorbed current (A) 4.0 5.6 8.4 11.2
Variable flow (m3/h) from 1.5 to 3.5 m3/h 
Maxi. TDH (m C.E) 40.7 58.2 87.3 116
Maxi. pressure (bar) 4 5.8 8.7 11.5
Temperature of liquid until 35 °C
Variable speed drives
EASYMAT 7.5 M/T
Pressure transmitter included
Motor mount + Collector + Support included
8L bladder tank
included
Valves + connections
included
PBS-R electric cable
15 30 40 60
Nylon cord (m) 20 35 45 65
Ø of pump (mm) DN100
Heighter of (mm) 712 817 982 1157
Ø of discharge
1" 1/4 F (33 x 42)
Total weight (kg) 31 33.2 35.1 39.4

 



 

 

 

 

 

 

Reviews

Be the first to write your review !

Customer ratings and reviews

Nobody has posted a review yet
in this language

Rate / write a comment

Borehole pump kit



  • advertising-custom.gif
  • 33cd06463975cf0e4b00de7c27a42dfc.jpg