List of products by brand CALPEDA

International manufacturer specializing in the production of borehole pumps, lift pump, lifting station, swimming pool pump ...

Calpeda: products: 4" borehole pump, Horizontal multistage pump, Sewage pump station - one pump, Water pump control panel, Septic pump. Available at Pompes H2O, advice on +33 3 44 25 91 01.

Less
Réhausse 250mm pour Califosse et Calidom
2 to 4 days
Sewage pump station - one pump
250 mm riser for Califosse and Calidom
220112
£146.51

£146.51 tax excl.

Delivery 2 to 4 days

Riser for CALIFOSSE and CALIDOM lifting stations, riser height 250 mm. Specially designed for CALPEDA circular tanks.
Pompe forage 3" inox Calpeda 3SD
3 to 5 days
3" borehole pump
3" stainless steel borehole pump Calpeda 3SD
£586.06

£586.06 tax excl.

Delivery 3 to 5 days

3" submersible pump, for 80 mm boreholes, 304 stainless steel outer sleeve, Noryl radial impellers, flow rate from 0.3 to 2.4 m3/h, power from 0.37 to 1.10 kW, single-phase or three-phase supply, 1.5 m cable lead.
Pompe forage 3" inox Calpeda 3SD équipée
4 to 6 days
3" borehole pump
3" stainless steel borehole pump Calpeda 3SD equipped
£830.95

£830.95 tax excl.

Delivery 4 to 6 days

3" borehole pump equipped with electric cable of 15 to 60 m length, food quality, Nylon suspension rope, nominal flow rate 2 m3/h, power from 0.37 to 1.10 kW, single-phase or three-phase.
Kit pompe forage tout inox avec variateur de vitesse
3 to 5 days
Borehole pump kit
4SDX all stainless steel borehole pump kit with variable speed drive (2 to 6 m3/h)
£2,141.91

£2,141.91 tax excl.

Delivery 3 to 5 days

All stainless steel borehole pump kits, single-phase supply, comprising the 4" all stainless steel 304 borehole pump, the variable speed drive with its stainless steel wall bracket, the stainless steel manifold, stainless steel borehole head assembly, food-grade submersible electric cable in a length of 20, 30, 40 or 60 metres, the 4 mm stainless steel...
Pompe auto-amorçante spéciale eau de mer A 50-EDM
2 to 4 days
Pump with open impeller
A-EDM (DN50) self-priming pump special for sea water
£1,191.65

£1,191.65 tax excl.

Delivery 2 to 4 days

Pumping of clean liquid, sea water, dirty water or water slightly loaded with impurities (10mm max), self-priming pump with open impeller. DN50 (2") suction and delivery, max flow rate 33 m3/h.
Pedrollo NKm 2 immersed pump 230V
2 to 4 days
Wells pump
All SS CALPEDA pump MXS 3 3-phase MXS 3
£887.46

£887.46 tax excl.

Delivery 2 to 4 days

Three-phase multistage submersible pump, all 304 stainless steel construction, supplied with 20 m of cable. Available in powers from 0.45 to 1.50 Kw. Nominal flow 3 m3/h.
Pompe de relevage à roue vortex Calpeda GXV 40 Pompe de relevage à roue vortex Calpeda GXV 40 2
2 to 4 days
Domestic sewage pump
All stainless steel lift pump with vortex impeller GXVM 40 (230V)
£600.71

£600.71 tax excl.

Delivery 2 to 4 days

All stainless steel submersible pump, lifting of waste water and sewage (WC), vortex impeller, passage of particles 35mm max, vertical threaded delivery 1" 1/2. Ball float for automatic start and stop. Three power ratings available, 0.55 Kw, 0.75 Kw and 0.90 Kw.
Micro-station de relevage automatique GEOCOMP Micro-station de relevage automatique GEOCOMP 2
2 to 4 days
Lifting micro-station
Automatic lifting micro-station GEOCOMP
201040
£624.43

£624.43 tax excl.

Delivery 2 to 4 days

Very useful when it is not possible to connect to the drainage network, the GEOCOMP micro station is designed to macerate and discharge waste water from a WC, a washbasin, a shower/bath/bidet...
Kit de gestion automatique eau de pluie / eau de ville
2 to 3 days
Recovery of rainwater
Automatic rainwater / mains water management kit
£771.64

£771.64 tax excl.

Delivery 2 to 3 days

The automatic rainwater/mains water management kit is fitted with a float. It automatically tops up the storage tank with mains water when there is a shortage of rainwater.
Automatic small sewage pump station 40L
2 to 4 days
Sewage pump station - one pump
Automatic small sewage pump station 40L
220011
£634.90

£634.90 tax excl.

Delivery 2 to 4 days

Automatic small sewage pump station 40L for lifting of sewage, clean water or loaded slightly. fully unit and ready to install, with tank burried 40L + power pump 0.25kw + equipment.
Pompe Balneo SPA Calpeda Pompe Balneo SPA Calpeda 2
2 to 4 days
Swimming-pool pump
Balneo Whirlpool spa circulation pump
£452.10

£452.10 tax excl.

Delivery 2 to 4 days

Circulation pump for balneotherapy, SPA, Whirlpool, with Noryl cover and diffuser, automatic drain, pump body in composite materials (ABS), stainless steel diffuser and impeller, compact construction, solvent-weld or threaded connection with male thread, for use with Balneo and whirlpool.
Platine pour 1 ou 2 électrodes de niveau coffret MCOMP
2 to 4 days
Water pump control panel
Board for 1 or 2 level electrodes for MCOMP panel
008121
£93.49

£93.49 tax excl.

Delivery 2 to 4 days

LVBT electronic level control card for MCOMP panel, single-electrode operation with a 0 to 12 minute time delay or two-electrode operation, high level and low level.
Kit surpresseur avec pompe immergée spéciale eau de pluie (2 m3/h)
2 to 4 days
Recovery of rainwater
Booster kit with floating suction pump K EP
£933.51

£933.51 tax excl.

Delivery 2 to 4 days

Vertical stainless steel submersible pump kit, special for rainwater with 24 or 50L bladder booster. Single-phase power supply, flow rate 2 m3/h.
Kit surpresseur avec pompe immergée spéciale eau de pluie (2 m3/h)
3 to 5 days
Recovery of rainwater
Booster kit with low suction pump K EP
£863.04

£863.04 tax excl.

Delivery 3 to 5 days

Stainless steel submersible pump kit, with 24 or 50 L bladder pressure tank, automatic pump start and stop, dry-run safety, automatic restart, single-phase power supply, power 0.55 Kw.
Station de relevage avec pompe broyeuse Calpeda GQG 1.50 Kw Station de relevage avec pompe broyeuse Calpeda GQG 1.50 Kw 2
3 to 5 days
Sewage pump station - one pump
CAL230 GQGM lifting station with grinder pump
£1,452.59

£1,452.59 tax excl.

Delivery 3 to 5 days

Lifting station for waste water, loaded water and sewage, for a home or small housing group (1 to 20 PE). Models with or without base feet (PA), cast iron pump with 1.50 kW cutter impeller, fitted with a float switch, reinforced polyethylene tank, volume 230 L.
Micro station de relevage eaux usées domestique 40L Micro station de relevage eaux usées domestique 40L 2
3 to 5 days
Sewage pump station - one pump
CAL40 GXVM lifting station for slightly soiled water 40L
220216
£653.04

£653.04 tax excl.

Delivery 3 to 5 days

Installation in confined spaces, small footprint, lifting of water from bathrooms and sinks, and slightly loaded water with solid particles up to 25 mm, PVC discharge diameter 40. All stainless steel pump, with vertical magnetic float.
Station de relevage CALIDOUBLE-GQS-GQV Station de relevage CALIDOUBLE-GQS-GQV 2
4 to 8 days
Sewage pump station - two pumps
CALIDOUBLE PA 13 twin-pump sewage lifting station
£3,726.36

£3,726.36 tax excl.

Delivery 4 to 8 days

Twin-pump lifting station with pumps on duckfoot bends for sewage and waste water: power 1.10 kW, use up to 100 PE (population equivalents), three buried tank volumes from 780 to 1,340 L. Delivered ready to use with a control and protection panel for 2 pumps in alternation, overflow alarm, installation and maintenance manual.
CALPEDA 4SDF 22 stainless steel 4" borehole pump - 400V - 2.5 m3/h CALPEDA 4SDF 22 stainless steel 4" borehole pump - 400V - 2.5 m3/h 2
2 to 4 days
4" borehole pump
CALPEDA 4SDF 22 stainless steel 4" borehole pump - 400V - 2.5 m3/h
£551.87

£551.87 tax excl.

Delivery 2 to 4 days

CALPEDA 4SDF 22 stainless steel borehole pump 4", with a flow from 1.5 m3/h to 2.5 m3/h, DN100 for pumping in deep wells. NEMA standard. Power from 0.37 kw to 2.20 kw. Three-phase 400V.
Calpeda 4SD stainless steel borehole pump 4" - 1m3/h Calpeda 4SD stainless steel borehole pump 4" - 1m3/h 2
2 to 4 days
4" borehole pump
CALPEDA 4SDFM 16 stainless steel 4" borehole pump - 230V - 1.2m3/h
£569.31

£569.31 tax excl.

Delivery 2 to 4 days

Calpeda 4SDFM 16 stainless steel borehole pump 4" with a flow to 1.2m3/h. Is a stainless steel submersible pump DN100 designed for drilling in pumping and deep wells. NEMA standard. Power from 0.37 kw to 2.20 kw.
Calpeda 4SD stainless steel borehole pump 4" - 1m3/h Calpeda 4SD stainless steel borehole pump 4" - 1m3/h 2
2 to 4 days
4" borehole pump
CALPEDA 4SDFM 22 stainless steel 4" borehole pump - 230V - 2.5 m3/h
£556.76

£556.76 tax excl.

Delivery 2 to 4 days

Calpeda 4SDFM 22 stainless steel borehole pump 4" with a flow to 2.5 m3/h. Is a stainless steel submersible pump DN100 designed for drilling in pumping and deep wells. NEMA standard. Power from 0.37 kw to 2.20 kw.
Calpeda 4SD stainless steel borehole pump 4" - 1m3/h Calpeda 4SD stainless steel borehole pump 4" - 1m3/h 2
2 to 4 days
4" borehole pump
CALPEDA 4SDP 3 stainless steel 4" borehole pump - 400V
£580.48

£580.48 tax excl.

Delivery 2 to 4 days

CALPEDA 4SDP 3 stainless steel borehole pump 4", with a flow to 3.5 m3/h, DN100 for pumping in deep wells. NEMA standard. Power from 0.37 kw to 4.00 kw. Three-phase 400V.
Showing 1-24 of 176 item(s)