Air regulator for surface pump

Operation :
- The volume of air injected into the tank at the end of each cycle is 300 cm3 for the AR 300E and 1000 cm3 for the AR 1000E respectively.
- For the ARIAMAT to operate properly, the suction vacuum must be appropriate when the pump is running.
- If the pump works with a positive head and the water reaches the pump by gravity, there would not be sufficient vacuum in the suction hose to ensure proper operation of the ARIAMAT; in that case, a head loss must be created artificially in the suction hose by gradually closing the valve while the pump is running, until the water level in the ARIAMAT starts to fall.
- If it is impossible to achieve sufficient vacuum to guarantee proper operation of the ARIAMAT, an air supply system with compressor and level probes must be used.

Scope of supply:
- Complete ARIAMAT with upper fitting and valve.
- 1 m of polyethylene tube with clamp and fitting for connection to the pump suction.

Customs number: 84139100 - Country of origin: Italy