Water shortage management panel Single-phase PFC-M (C)

Operation without a probe, by measuring the power factor (cos phi). Control and shutdown of the pump in the event of: lack of air in the tank, overvoltage, undervoltage, overload, lack of water. 2 x 16 character front control display, 6-button keypad to set up and control the device, four languages in the menu.

PFC-M control panel with capacitor specifications:
- Thermoplastic enclosure: 220x110x210 mm.
- Degree of protection: IP 55.
- Single-phase power supply 220-240V 50/60 Hz.
- Output power from 0.25 to 2.20 kw (max).
- Adjustment from 1 to 18 A.
- Built-in capacitor (see table below).
- Dry-running protection (cos phi measurement).
- Ambient temperature -5 +40 °C.
- Relative humidity: from 20 to 90 % non-condensing.
- The pump can operate automatically with a pressure switch (booster circuit) or a float switch (tank filling).
- Alarm output.
- Supplied with a cable of: 1.5m + a plug.
- Design in accordance with: IEC/EN 60439-1.

Operation and alarms:
- Automatic pump operation.
- Undervoltage and overvoltage: visual warning and pump stop.
- Motor overload:  visual warning and pump stop.
- Lack of water: visual warning and pump stop.
- Lack of air in bladder pressure tank: pump stops after 4 restarts.

Options:
- RA 100 alarm panel, fitted with a buzzer and a flashing red light: ref 008031.