Electrics accessories

Essential electrical accessories for connecting pump installations, pumping stations, lifting stations...

Variable speed drives
Water pump control panel
Pressure switch
Pump automation
Float switch - Regulator of level
Motor protection circuit breaker
Cable
Coupling
Level regulator
Pressure control
Condensator
Solenoid valve
Coffret alarme niveau haut Coffret alarme niveau haut 2
2 to 4 days
Water pump control panel
Alarm panel with battery backup - ALARME-TOP
007098
$197.39

$197.39 tax excl.

Delivery 2 to 4 days

High level detection panel for tank, lifting station, with power-on and alarm indicator lights, detection by a level float, 230 volt supply, 9V rechargeable battery, 90 dB buzzer, rotating beacon, test button, reset, alarm output contact, with mains power cable.
Interrupteur à flotteur ATEX Interrupteur à flotteur ATEX 2
2 to 4 days
Float switch - Regulator of level
ATEX float switch SUPERTEC EX
001411
$145.25

$145.25 tax excl.

Delivery 2 to 4 days

ATEX float switch, versatile for clean liquids, waste water and industrial water, switching angle +/- 45°, ATEX II 1G Ex ia IIC T6 compliant, double-layer float, pressure resistant.
Kit d'automatisme pour réservoir à vessie - E/S 1" Kit d'automatisme pour réservoir à vessie - E/S 1" 2
Last items in stock
Pressure switch
Automatic functioning set for surface pump 230V
$132.21

$132.21 tax excl.

Last items in stock

This automatic kit in single-phase, is designed to connect and to do automatic functioning of surface pump, and bladder tank too (on-line, spherical or horizontal). The contactor permit to connect a surface pump single-phase.
Alimentation de secours CombiMaster 12/2000-60
3 to 5 days
Water pump control panel
CombiMaster 2000VA 230V emergency power supply
$3,379.81

$3,379.81 tax excl.

Delivery 3 to 5 days

Backup power supply for single-phase lift pump, up to 1.50 kw, automatic switching in the event of mains failure, the battery takes over, the converter provides an output voltage of 230V. Backup power supply for single-phase lift pumps, CombiMaster 12/2000-60 and CombiMaster 24/2000-60, battery cut-off, battery cables, AGM 12/160 Ah and 320 Ah battery.
Contacteur puissance Schneider LC1 400V
2 to 3 days
Motor protection circuit breaker
Contacteur puissance Schneider LC1 400V
$40.04

$40.04 tax excl.

Delivery 2 to 3 days

Three-pole contactor LC1D09V7, LC1D12V7 and LC1D18V7, 400 volt coil voltage, DIN rail or chassis mounting, NO & NC auxiliary contacts.
Boitier de commande et protection pompe de relevage monophasé
Motor protection circuit breaker
Control and protection box for single-phase lift pump
To automate a single-phase lift pump, AT-120 float switch for agitated, clear, waste and loaded water, Schneider box with on/off button, thermal reset, power contactor + thermal protection relay, control by float switch in the tank.
View
Boitier de commande et protection pompe de relevage triphasé
2 to 4 days
Motor protection circuit breaker
Control and protection box for three-phase lift pump
$312.84

$312.84 tax excl.

Delivery 2 to 4 days

Control and protection box for a three-phase lift pump from 0.55 Kw to 11.00 Kw, AT-120 float switch for agitated, clear, waste and loaded water, Schneider box with on/off button, thermal reset, power contactor + thermal protection relay, control by float switch in the tank.
Interrupteur de niveau à flotteur BIP STOP Interrupteur de niveau à flotteur BIP STOP 2
2 to 3 days
Float switch - Regulator of level
FLO STOP float level switch for small pumps
$33.52

$33.52 tax excl.

Delivery 2 to 3 days

FLO STOP Float level switch for small pumps for application with slightly aggressive liquids, and highly appreciated in agitated liquids - Switching angle + or - 110º - Maximum pressure : 3,5 bars.
Float switch + 2P remote-control connection plug
2 to 4 days
Float switch - Regulator of level
Float switch + 2P remote-control connection plug
$74.49

$74.49 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Float switch + 2P remote-control connection plug
2 to 4 days
Recovery of rainwater
Float switch + 2P remote-control connection plug
$79.14

$79.14 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Float switch + 2P remote-control connection plug
2 to 4 days
Float switch - Regulator of level
Float switch + 2P remote-control connection plug
$74.49

$74.49 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Float switch + 2P remote-control connection plug
2 to 4 days
Float switch - Regulator of level
Float switch + 2P remote-control connection plug
$79.14

$79.14 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Détecteur de niveau ras du sol - CRAB Détecteur de niveau ras du sol - CRAB 2
2 to 4 days
Float switch - Regulator of level
Floor water detector
001412
$202.98

$202.98 tax excl.

Delivery 2 to 4 days

Placed on a flat surface, the CRAB detector can detect the presence of water on the floor from 3 mm, thanks to two low probes, suitable for single-phase lift pumps without float, low suction, supplied with 10 metre cable + remote control plug.
Interrupteur à flotteur universel FOX - G09
2 to 3 days
Float switch - Regulator of level
FOX - G09 universal float switch
001419
$67.97

$67.97 tax excl.

Delivery 2 to 3 days

The FOX - G09 float switch allows direct control of a single-phase lift pump up to 2.20 Kw, used for clear and waste water, activation angle 45°, max liquid temperature 70°C.
Connecteur étanche démontable IP68 Connecteur étanche démontable IP68 2
2 to 3 days
Coupling
IP68 demountable watertight connector
$19.83

$19.83 tax excl.

Delivery 2 to 3 days

It allows safe connection between two electrical cables, 3 or 4 wires, IP68, replacing heat-shrink sleeves or watertight joints. For electrical cables from 0.5 to 1.5 mm².
Coffret modulaire étanche Kaedra Coffret modulaire étanche Kaedra 2
2 to 3 days
Motor protection circuit breaker
Kaedra watertight modular enclosure
$45.72

$45.72 tax excl.

Delivery 2 to 3 days

Mini watertight IP65 electrical enclosure KAEDRA, for modular equipment on DIN rail, available in 4 and 8 modules.
Boitier démarreur étoile triangle LE6D09-D12-D18
Water pump control panel
LE6D09V7-D12-D18 star delta starter box
Star-delta starter box, function, star-delta protected, 3 contactors, fuse disconnector, IP65 polycarbonate box, on/off button, thermal relay to be ordered separately.
View
Contacteur manométrique avec manomètre PM5
2 to 4 days
Pressure switch
Pressure switch with pressure gauge PM5
001214
$44.69

$44.69 tax excl.

Delivery 2 to 4 days

0-6 bar pressure switch with pressure gauge and built-in fittings for screwing directly onto pump and tank. Factory setting 1.5 to 2.8 bar, food grade quality.
Contacteur démarreur en coffret Schneider LE1D09-12-18V7A13 (400V)
2 to 4 days
Motor protection circuit breaker
Schneider 400V contactor starter box
$137.80

$137.80 tax excl.

Delivery 2 to 4 days

Electric motor starter box, pumps, fans, 400V coil voltage, 2-position on/off selector, reset button, for the LRD thermal relay, (not included).
Contacteur puissance Schneider LC1D09-12-18
2 to 3 days
Motor protection circuit breaker
Schneider LC1 power contactor (230V)
$40.04

$40.04 tax excl.

Delivery 2 to 3 days

Schneider Electric TeSys D three-pole power contactor, with normally open (NO) and normally closed (NC) auxiliary contacts, models with 230 V coil, LC1D09P7, LC1D12P7, LC1D18P7.
Kit gestionnaire pompe monophasé avec réservoir Kit gestionnaire pompe monophasé avec réservoir 2
2 to 3 days
Pump automation
Single-phase pump manager kit with tank
$230.91

$230.91 tax excl.

Delivery 2 to 3 days

Single-phase surface or submersible pump outlet kit, including an Optimatic RM manager, with built-in flow rate and pressure sensor, a 3 or 8 litre Flowvarem in-line tank, a stainless steel valve and fittings set, power supply and connection electric cable.
Showing 1-24 of 30 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

The electrical equipment for your pumps

Control panels, variable speed drives, pressure switches, motor protection, floats and level detectors, capacitors, cables and solenoid valves: everything that controls and protects a pump.

Selection criteria

  • Power supply: single-phase 230 V or three-phase 400 V.
  • Power or current of the motor, shown on its rating plate.
  • Function: starting, protection, pressure control or level control.

Frequently asked questions: Electrical accessories

How do I choose a control panel?

Choose it according to the power supply (single-phase or three-phase), the power or current of the motor and the number of pumps to control. Panels for two pumps alternate their operation.

What is a pressure switch used for?

It starts and stops the pump according to the pressure of the network: it opens at high pressure and closes at low pressure. Its thresholds are set according to your installation.

Variable speed drive: what is the benefit?

It adjusts the motor speed to the demand: steady pressure, fewer starts, soft start and controlled energy use. Check that it matches the voltage and the power of your motor.

Float or level probe?

A float is simple and cheap for starting and stopping a lift pump. A probe or level controller allows finer settings and protects against dry running.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.