Lift pump

Submersible lift pumps for waste water, loaded water, rainwater, sand-laden water, aggressive liquids, thick liquids, ATEX lift pumps, construction site pumps, as well as accessories for lift pump installations, such as base stands, guide rails, float switches and level regulators, Piezo probe, control panels, overflow alarms, pipes, lift pump outlet kits, non-return valves, galvanised cast iron fittings, pressure PVC, 316 stainless steel.

Domestic pump
Dewatering pump
Domestic sewage pump
Septic pump
Sewage pump station - one pump
Sewage pump station - two pumps
Macerator pump
Corrosion resistant pump
Worksite pump
Accessories for lifting
Lifting micro-station
12/24V lifting pump
Station de relevage eaux chargées habitation 150 L Station de relevage eaux chargées habitation 150 L 2
3 to 5 days
Sewage pump station - one pump
150L loaded water lifting station with grinder pump
220217
€1,508.33

€1,508.33 tax excl.

Delivery 3 to 5 days

150 L sewage lifting station for waste water/loaded water from a dwelling, fitted with a 0.75 kW single-phase lift pump, with a macerator system to finely cut stringy matter and thus prevent the impeller from blocking.
Pompe de relevage liquides chimiques et corrosifs - DGX (tri) Pompe de relevage liquides chimiques et corrosifs - DGX (tri) 2
4 to 6 weeks
Corrosion resistant pump
316 stainless steel lift pump for loaded liquids DGX T
€2,158.33

€2,158.33 tax excl.

Delivery 4 to 6 weeks

Vortex impeller pump, all 316 stainless steel construction, able to operate in submerged mode, designed for lifting filtered, extremely corrosive or aggressive liquids. Vertical DN50 outlet, three-phase supply, power from 0.37 to 1.50 Kw.
Pompe de relevage pour liquides chimiques et corrosifs - DRX Pompe de relevage pour liquides chimiques et corrosifs - DRX 2
4 to 6 weeks
Corrosion resistant pump
316 stainless steel lift pump for slightly loaded liquids DRX M/A
€2,158.33

€2,158.33 tax excl.

Delivery 4 to 6 weeks

Submersible pump all 316 stainless steel, for clear or slightly loaded liquids, designed for pumping extremely corrosive liquids, chemical liquids, leachate pumping, pumping in saline environments. Single-phase 230 volt supply, pump fitted with a float.
Pompe de relevage liquides chimiques et corrosifs - DRX (tri) Pompe de relevage liquides chimiques et corrosifs - DRX (tri) 2
4 to 6 weeks
Corrosion resistant pump
316 stainless steel lift pump for slightly loaded liquids DRX T
€2,116.67

€2,116.67 tax excl.

Delivery 4 to 6 weeks

Submersible pump all 316 stainless steel, for clear or slightly loaded liquids, designed for pumping extremely corrosive liquids, chemical liquids, leachate pumping, pumping in saline environments. Three-phase 400 volt supply.
Pompe submersible grande hauteur manométrique
1 to 2 weeks
Dewatering pump
APG high head submersible pump
€1,440.00

€1,440.00 tax excl.

Delivery 1 to 2 weeks

High head pump for clear or very slightly loaded water, cast iron construction, eco-friendly motor.
Pompe submersible en Bronze DRB
4 to 6 weeks
Corrosion resistant pump
Bronze lift pump for slightly loaded liquids DRB M
€2,066.67

€2,066.67 tax excl.

Delivery 4 to 6 weeks

Submersible pump all B10 bronze, for clear or slightly loaded liquids, designed for pumping aggressive filtered chemical liquids, dyes, sea water, used in the leather industry and the marine sector. Single-phase 230 volt supply.
Pompe de relevage liquides chimiques et eau de mer DRB (tri)
4 to 6 weeks
Corrosion resistant pump
Bronze lift pump for slightly loaded liquids DRB T
€2,050.00

€2,050.00 tax excl.

Delivery 4 to 6 weeks

Submersible pump all B10 bronze, for clear or slightly loaded liquids, designed for pumping aggressive filtered chemical liquids, dyes, sea water, used in the leather industry and the marine sector. Three-phase supply, available from 0.37 to 1.50 Kw.
Embase fonte pompe ZENIT
2 to 4 days
Accessories for lifting
Cast iron base plate for ZENIT pump - 9024.006
112524
€97.50

€97.50 tax excl.

Delivery 2 to 4 days

Cast iron base with 3 arms for free-standing installation of ZENIT pump. (see model below).
Embase fonte pompe ZENIT
2 to 4 days
Accessories for lifting
Cast iron base plate for ZENIT pump - 9024.009
112526
€551.84

€551.84 tax excl.

Delivery 2 to 4 days

Cast iron base with 4 arms for free-standing installation of ZENIT pump. (see model below).
Embase fonte pompe ZENIT
2 to 4 days
Accessories for lifting
Cast iron base plate for ZENIT pump - 9024.010
112523
€80.00

€80.00 tax excl.

Delivery 2 to 4 days

Cast iron base with 3 arms for free-standing installation of ZENIT pump, (- DGO 150-200/2/G65V-65-80 - DGF 150-200/2/G65V-65-80).
Coude en fonte à bride PN10 refoulement pompe
2 to 4 days
Accessories for lifting
Cast iron flanged elbow PN10 for pump delivery
€160.00

€160.00 tax excl.

Delivery 2 to 4 days

Cast iron lift pump outlet elbow, standard PN10 flanged connection, available in DN65, DN150, DN200 and DN250, supplied with gaskets and A2 stainless steel bolts.
Pompe broyeuse Grinder Fonte 100
2 to 3 days
Macerator pump
Cast iron grinder pump - Grinder 100
€746.67

€746.67 tax excl.

Delivery 2 to 3 days

Lift pump with hardened stainless steel grinder, for lifting waste water, loaded water and black water from a dwelling, power 0.75 Kw, single-phase supply, with float, DN50 2" outlet.
Alimentation de secours CombiMaster 12/2000-60
3 to 5 days
Water pump control panel
CombiMaster 2000VA 230V emergency power supply
€3,025.00

€3,025.00 tax excl.

Delivery 3 to 5 days

Backup power supply for single-phase lift pump, up to 1.50 kw, automatic switching in the event of mains failure, the battery takes over, the converter provides an output voltage of 230V. Backup power supply for single-phase lift pumps, CombiMaster 12/2000-60 and CombiMaster 24/2000-60, battery cut-off, battery cables, AGM 12/160 Ah and 320 Ah battery.
Pompe d'épuisement chantier SUPERDREN 200M-T Pompe d'épuisement chantier SUPERDREN 200M-T 2
2 to 4 days
Worksite pump
Construction site dewatering pump SUPERDREN 200
€2,041.67

€2,041.67 tax excl.

Delivery 2 to 4 days

Submersible pump in 304 stainless steel, with cast iron outlet, ideal for draining water containing sand, small solids up to 10 mm, flow rate up to 48 m3/h, max head 17 metres, single-phase or three-phase supply, depending on model, power 1.50 Kw.
Pompe de drainage chantier PRO SAND Pompe de drainage chantier PRO SAND 2
2 to 4 days
Worksite pump
Construction site drainage pump DREN 100
€660.00

€660.00 tax excl.

Delivery 2 to 4 days

Submersible drainage pump for water loaded with mud, sand, basement pumping, foundations, crawl spaces, rainwater drainage, sump water. Robust cast iron pump, professional quality, power 0.75 Kw single-phase with float or three-phase without float, max flow rate 18 m3/h, max head 12 metres.
Boitier de commande et protection pompe de relevage monophasé
Motor protection circuit breaker
Control and protection box for single-phase lift pump
To automate a single-phase lift pump, AT-120 float switch for agitated, clear, waste and loaded water, Schneider box with on/off button, thermal reset, power contactor + thermal protection relay, control by float switch in the tank.
View
Boitier de commande et protection pompe de relevage triphasé
2 to 4 days
Motor protection circuit breaker
Control and protection box for three-phase lift pump
€280.00

€280.00 tax excl.

Delivery 2 to 4 days

Control and protection box for a three-phase lift pump from 0.55 Kw to 11.00 Kw, AT-120 float switch for agitated, clear, waste and loaded water, Schneider box with on/off button, thermal reset, power contactor + thermal protection relay, control by float switch in the tank.
Pompe de relevage eaux usées DG Blue Pro
2 to 3 days
Domestic sewage pump
DG Blue PRO waste water lift pump (SINGLE-PHASE)
€745.83

€745.83 tax excl.

Delivery 2 to 3 days

DG BLUE PRO submersible pump, cast iron vortex impeller, free passage 40 or 50 mm, depending on model, dry ecological motor, with thermal protection, two oil-bath mechanical seals, vertical delivery 1" 1/2 or 2" GAS, 10 metre electric cable, with or without float switch, single-phase supply.
Pompe de relevage eaux usées DG Blue PRO TRI
1 to 2 weeks
Domestic sewage pump
DG Blue PRO waste water lift pump (THREE-PHASE)
€707.50

€707.50 tax excl.

Delivery 1 to 2 weeks

DG BLUE PRO submersible pump, cast iron vortex impeller, free passage 40 or 50 mm, depending on model, dry ecological motor, with thermal protection, two oil-bath mechanical seals, vertical delivery 1" 1/2 or 2" GAS, 10 metre electric cable, with or without float switch, three-phase supply.
Pompe de relevage eaux usées domestique DG STEEL AUT Pompe de relevage eaux usées domestique DG STEEL AUT 2
2 to 3 days
Domestic sewage pump
DG STEEL AUT lift pump
€354.17

€354.17 tax excl.

Delivery 2 to 3 days

DG STEEL AUT lift pump, with float, admissible solid particles, 40 mm max for 0.55 and 0.75 kW models, installation in lifting station, sumps, tank. Power 0.37, 0.55 and 0.75 kW, single-phase or three-phase supply, depending on model.
Pompe de relevage eaux usées domestique DG STEEL TCW Pompe de relevage eaux usées domestique DG STEEL TCW 2
2 to 3 days
Domestic sewage pump
DG STEEL TCW lift pump
€330.00

€330.00 tax excl.

Delivery 2 to 3 days

All 304 stainless steel submersible pump, with adjustable magnetic float, compact size, permissible solid particles 40 mm max for the 0.55 and 0.75 Kw models, installation in lifting station, sumps, minimum manhole dimensions, (length x width), 30 x 30 cm, 0.37 Kw model, 35 x 35 cm, 0.55 Kw model and 50 x 50 cm, 0.75 Kw model. For lifting waste water from...
Pompe de relevage en Bronze à roue vortex DGB
4 to 6 weeks
Corrosion resistant pump
DGB M/A bronze lift pump for loaded liquids
€2,525.00

€2,525.00 tax excl.

Delivery 4 to 6 weeks

Bronze lift pump with Vortex impeller for loaded liquids and sea water / Single-phase / with M/A float switch / Power 0.55 Kw and 1.10 Kw.
Pompe de relevage à roue vortex DGG - DN65
3 to 5 days
Septic pump
DGG lift pump with vortex impeller - DN65 - (2900 rpm)
€1,520.00

€1,520.00 tax excl.

Delivery 3 to 5 days

Submersible lift pump with vortex impeller, horizontal DN65 flanged outlet, free passage for solids 65 mm, power 1.8 to 7.5 kW, for loaded water.
Showing 1-24 of 82 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

How to choose a lift pump

Three criteria guide the choice: the type of water to be removed, the flow rate you need and the discharge head. A lift pump moves clean, loaded or waste water to a higher or more distant point: sewer, ditch, sump or tank.

Clean water, loaded water, waste water: the right model

  • Clean water (flooded cellar, rainwater, draining): cellar drainage pump or drainage pump.
  • Loaded water (light mud, building sites): pump with a wide free passage or a vortex impeller.
  • Waste water (toilets, kitchen, basement): sewage pump, lift station with tank, or grinder pump.

Which category should you choose?

For a detailed comparison: Choosing a lift pump.

Accessories for a lift installation

Complete the pump with a non-return valve, a float or level detector, a control panel, a high-level alarm and a mounting base. These accessories are available in the lift accessories and control panels categories of the shop.

Frequently asked questions: Lift pumps

What is the difference between a cellar pump, a loaded-water pump and a sewage pump?

A cellar or drainage pump removes clear or lightly loaded water (flooded cellar, sump, rainwater). A loaded-water pump lets suspended particles pass (light mud, fine gravel). A sewage pump has a large free passage for the solids found in domestic waste water. Each product page gives the free passage, i.e. the maximum particle size the pump accepts.

When should I choose a grinder pump?

A grinder pump removes the waste of a toilet, washbasin or shower installed below the level of the sewer (basement, extension). It grinds the solids and pushes them through a small-diameter pipe over a significant height or distance. Follow the manufacturer's instructions for connection and discharge.

How do I choose the flow rate and the head?

The total head is the vertical height to climb, plus the friction losses in pipes and bends. Choose a pump whose performance curve gives at least the flow you need at that head, and keep a margin. A pipe that is too long or too narrow reduces the real flow noticeably.

Do I need a non-return valve and an alarm?

A non-return valve on the discharge pipe stops water from flowing back into the tank each time the pump stops. A high-level alarm warns you of a failure or a blockage before the tank overflows.

Single-phase or three-phase: which power supply?

Small and medium pumps run on single-phase 230 V, like a household socket. High-power pumps (public bodies, industry, lift stations) are available in three-phase 400 V. 12 V and 24 V models also exist for mobile installations.

Lift pump or lift station?

A submersible pump placed at the low point is enough to empty a cellar from time to time. As soon as drainage is permanent (sanitary fittings, kitchen or a basement room), you install a lift station: a sealed tank, one or more pumps, a level control and a non-return valve. Two pumps take turns and keep the service running if one fails.

Which pump for a basement bathroom?

For the water from toilets, shower and washbasin: a sewage pump, a macerator pump or a lifting micro-station with built-in grinder, depending on the discharge point. Check the free passage and the discharge diameter on the product page. The detail is in the guide Choosing a lift pump.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.