Electrics accessories

Essential electrical accessories for connecting pump installations, pumping stations, lifting stations...

Variable speed drives
Water pump control panel
Pressure switch
Pump automation
Float switch - Regulator of level
Motor protection circuit breaker
Cable
Coupling
Level regulator
Pressure control
Condensator
Solenoid valve
Interrupteur à flotteur ATEX Interrupteur à flotteur ATEX 2
2 to 4 days
Float switch - Regulator of level
ATEX float switch SUPERTEC EX
001411
$145.25

$145.25 tax excl.

Delivery 2 to 4 days

ATEX float switch, versatile for clean liquids, waste water and industrial water, switching angle +/- 45°, ATEX II 1G Ex ia IIC T6 compliant, double-layer float, pressure resistant.
Détecteur de niveau ras du sol - CRAB Détecteur de niveau ras du sol - CRAB 2
2 to 4 days
Float switch - Regulator of level
Floor water detector
001412
$202.98

$202.98 tax excl.

Delivery 2 to 4 days

Placed on a flat surface, the CRAB detector can detect the presence of water on the floor from 3 mm, thanks to two low probes, suitable for single-phase lift pumps without float, low suction, supplied with 10 metre cable + remote control plug.
Interrupteur à flotteur universel FOX - G09
2 to 3 days
Float switch - Regulator of level
FOX - G09 universal float switch
001419
$67.97

$67.97 tax excl.

Delivery 2 to 3 days

The FOX - G09 float switch allows direct control of a single-phase lift pump up to 2.20 Kw, used for clear and waste water, activation angle 45°, max liquid temperature 70°C.
Contacteur manométrique PM/5 - PM/12 Contacteur manométrique PM/5 - PM/12 2
2 to 3 days
Pressure switch
Pressure switch PM/5 - PM/12
$34.26

$34.26 tax excl.

Delivery 2 to 3 days

Pressure switch for water networks, single-pole or two-pole connection (230 volts), two pressure switch models, 1 to 5 bar (PM/5) and 3 to 12 bar (PM/12). 1/4" female threaded connection.
Régulateur électronique débit et pression pompe monophasé – BRIO 200M
2 to 3 days
Pump automation
Single-phase pump electronic manager (BRIO 2000M)
009136
$108.01

$108.01 tax excl.

Delivery 2 to 3 days

Replaces the tank and the pressure switch. The BRIO 2000M automatically controls the start and stop of a single-phase pump up to 1.50 Kw and protects it against dry running.
Variateur de vitesse pompe monophasé avec surpresseur 19L POWERVAREM
2 to 3 days
Variable speed drives
Single-phase pump speed controller with 19L booster tank POWERVAREM
009204
$654.55

$654.55 tax excl.

Delivery 2 to 3 days

Integrated system, with speed controller for 230 volt single-phase pump, from 0.30 kW to 1.10 kW, with 19 litre booster tank, 3-way fitting, supplied with its two electric cables, easy to install on the pump and to programme.
Interrupteur à flotteur eau potable " ACS " Interrupteur à flotteur eau potable " ACS " 2
2 to 3 days
Float switch - Regulator of level
Supertec ACS float switch for drinking water
001407
$107.07

$107.07 tax excl.

Delivery 2 to 3 days

Round polypropylene body, AD8 3X1 cable, ACS approved, switching angle 45°, 8A max for one motor, 220-240 volts, 10 metre cable.
Interrupteur à flotteur eaux chargées - vannes TAURUS
2 to 3 days
Float switch - Regulator of level
TAURUS level regulator for loaded water and sewage
001335
$100.56

$100.56 tax excl.

Delivery 2 to 3 days

Level regulator with triple watertight chamber, with built-in ballast, for waste water, loaded water, industrial water and lifting stations, switching angle of 20°, (very precise level detection). Available with 10 metre electric cable.
Contacteur manométrique PT/5 - PT/12
2 to 3 days
Pressure switch
Three-phase pressure switch PT/5 - PT/12
$35.38

$35.38 tax excl.

Delivery 2 to 3 days

Pressure switch for water network, three-pole connection (three-phase), two pressure switch models, 1 to 5 bar (PT/5) and 3 to 12 bar (PT/12). 1/4" female threaded connection.
Showing 1-10 of 10 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

The electrical equipment for your pumps

Control panels, variable speed drives, pressure switches, motor protection, floats and level detectors, capacitors, cables and solenoid valves: everything that controls and protects a pump.

Selection criteria

  • Power supply: single-phase 230 V or three-phase 400 V.
  • Power or current of the motor, shown on its rating plate.
  • Function: starting, protection, pressure control or level control.

Frequently asked questions: Electrical accessories

How do I choose a control panel?

Choose it according to the power supply (single-phase or three-phase), the power or current of the motor and the number of pumps to control. Panels for two pumps alternate their operation.

What is a pressure switch used for?

It starts and stops the pump according to the pressure of the network: it opens at high pressure and closes at low pressure. Its thresholds are set according to your installation.

Variable speed drive: what is the benefit?

It adjusts the motor speed to the demand: steady pressure, fewer starts, soft start and controlled energy use. Check that it matches the voltage and the power of your motor.

Float or level probe?

A float is simple and cheap for starting and stopping a lift pump. A probe or level controller allows finer settings and protects against dry running.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.