Electrics accessories

Essential electrical accessories for connecting pump installations, pumping stations, lifting stations...

Variable speed drives
Water pump control panel
Pressure switch
Pump automation
Float switch - Regulator of level
Motor protection circuit breaker
Cable
Coupling
Level regulator
Pressure control
Condensator
Solenoid valve
Coffret de commande et protection 2 pompes surpresseur - V2P Coffret de commande et protection 2 pompes surpresseur - V2P 2
2 to 4 days
Water pump control panel
2-pump booster set control and protection panel - V2P-E
008127
£584.66

£584.66 tax excl.

Delivery 2 to 4 days

Control of two booster pumps in alternation, with automatic changeover, controlled by two pressure switches, dual-voltage panel, single-phase or three-phase supply (230 or 400 Vac).
Alimentation de secours 230V CombiMaster 3000VA
Water pump control panel
230V CombiMaster 3000VA backup power supply
008319
£3,540.07

£3,540.07 tax excl.

Backup power supply for single-phase lift pump, up to 2.60 kw, automatic switching in the event of mains failure, the battery takes over, the converter provides an output voltage of 230V. Backup power supply for single-phase lift pumps, CombiMaster 24/3000-60, battery cut-off, 50mm² battery cables, 2 AGM 12/225 Ah batteries.
Pince batterie avec câble 2 m
2 to 3 days
Cable
4 mm² battery cable kit
005040
£18.49

£18.49 tax excl.

Delivery 2 to 3 days

Pair of 4 mm² battery cables, red and black, crimped with crocodile clips and round lugs, total length 2 metres.
Transmetteur de pression 4-20 mA
2 to 4 days
Variable speed drives
4-20 mA pressure transmitter
£96.28

£96.28 tax excl.

Delivery 2 to 4 days

Pressure sensor for air and water applications, 304 stainless steel wetted part, 4-20 mA signal, 0-10 or 0-16 bar models, supplied with 1.5 m electrical cable connected to the connector.
Boitier inverseur de source interrupteur AC/DC Boitier inverseur de source interrupteur AC/DC 2
1 to 2 weeks
Borehole and wells accessories
AC/DC source changeover box
504738
£466.06

£466.06 tax excl.

Delivery 1 to 2 weeks

When solar energy is absent or insufficient to guarantee the required hydraulic performance, the pump can be powered by an auxiliary generator. The AC/DC selector allows switching from one power source to the other.
Régulateur de niveau vertical réglable AGMA W Régulateur de niveau vertical réglable AGMA W 2
2 to 4 days
Float switch - Regulator of level
AGMAW EVO vertical magnetic level controller
001414
£53.02

£53.02 tax excl.

Delivery 2 to 4 days

Level controller for a single-phase lift pump up to 1.50 Kw max, installation with clear, waste or loaded water pump, vertical mounting with two fixing holes, adjustable on/off differential, 5 to 15 cm, 3G1 mm² electric cable of 25 cm.
Coffret alarme niveau haut Coffret alarme niveau haut 2
2 to 4 days
Water pump control panel
Alarm panel with battery backup - ALARME-TOP
007098
£147.91

£147.91 tax excl.

Delivery 2 to 4 days

High level detection panel for tank, lifting station, with power-on and alarm indicator lights, detection by a level float, 230 volt supply, 9V rechargeable battery, 90 dB buzzer, rotating beacon, test button, reset, alarm output contact, with mains power cable.
Electrovanne à membrane assistée pour eau potable - ESM 86 W
2 to 4 days
Solenoid valve
Assisted diaphragm solenoid valve for drinking water - ESM 86 W
£92.79

£92.79 tax excl.

Delivery 2 to 4 days

The ESM 86 W solenoid valve is pilot-assisted, normally closed (opens when energised), intended for isolating drinking water, air and neutral gas networks, differential pressure 0.3 bar. ACS compliant, available in 1/2", 3/4" and 1".
Interrupteur à flotteur pour liquides agités AT 120
2 to 4 days
Float switch - Regulator of level
AT 120 float switch for agitated liquids
001418
£85.12

£85.12 tax excl.

Delivery 2 to 4 days

For use with agitated, clear, waste and loaded water, this float level switch (On/Off) allows direct automation of pumps (up to 1.5 HP) or unlimited via a contactor. Differential angle of 120°, which allows a smooth contact to be established, and allows both the high level and the low level to be detected in the same tank.
Régulateur de niveau à flotteur ATEX
2 to 4 days
Float switch - Regulator of level
ATEX float level controller
001421
£113.72

£113.72 tax excl.

Delivery 2 to 4 days

TAURUS Ex float level controller, activation angle 20°, float with double sealed pressure-resistant chamber, cable RN8-F 4G 0.75, ATEX II1G Exia II C T6/T5 Ga certified.
Interrupteur à flotteur ATEX Interrupteur à flotteur ATEX 2
2 to 4 days
Float switch - Regulator of level
ATEX float switch SUPERTEC EX
001411
£108.84

£108.84 tax excl.

Delivery 2 to 4 days

ATEX float switch, versatile for clean liquids, waste water and industrial water, switching angle +/- 45°, ATEX II 1G Ex ia IIC T6 compliant, double-layer float, pressure resistant.
Relais de sécurité intrinsèque ATEX
2 to 3 days
Float switch - Regulator of level
ATEX intrinsic safety relay
001417
£213.49

£213.49 tax excl.

Delivery 2 to 3 days

The intrinsic safety relay, with galvanic isolation, is used to connect sensors, contacts and proximity detectors located in an ATEX zone, it is used to limit the electrical energy circulating in the ATEX zone, and to relay the on/off signals of a contact or detector.
Interrupteur de niveau Eau potable
2 to 4 days
Float switch - Regulator of level
ATS 165 EP - ACS certified float level switch
£150.70

£150.70 tax excl.

Delivery 2 to 4 days

ATS 165 EP, ACS certified float level switch use in extremely agitated drinking water applications. Switching angle : + or - 165°. Maximum pressure : 3,5 bars
Boitier alarme sonore niveau cuve - SENTINEL Boitier alarme sonore niveau cuve - SENTINEL 2
Last items in stock
Float switch - Regulator of level
Audible tank overflow alarm unit - SENTINEL
008185
£60.00

£60.00 tax excl.

Last items in stock

Connected to a 2P+T power socket, and wired to a level switch placed in a tank, it activates a siren according to the liquid level, built-in buzzer, 9V backup battery (in the absence of power), fitted with an output relay with potential-free contacts, to activate a remote alarm signal.
Kit d'automatisme pour réservoir à vessie - E/S 1" Kit d'automatisme pour réservoir à vessie - E/S 1" 2
Last items in stock
Pressure switch
Automatic functioning set for surface pump 230V
£99.07

£99.07 tax excl.

Last items in stock

This automatic kit in single-phase, is designed to connect and to do automatic functioning of surface pump, and bladder tank too (on-line, spherical or horizontal). The contactor permit to connect a surface pump single-phase.
Coffret de commande avec inverseur de source groupe électgrogène - COMMANDER
1 to 2 weeks
Water pump control panel
Automatic generator start panel - COMMANDER
422001
£834.44

£834.44 tax excl.

Delivery 1 to 2 weeks

Control and protection unit with automatic mains/generator changeover, digital LED display, built-in battery charger, control of petrol or diesel generator set, single-phase or three-phase, remote start possible. Many programmable functions, alarm output.
Platine pour 1 ou 2 électrodes de niveau coffret MCOMP
2 to 4 days
Water pump control panel
Board for 1 or 2 level electrodes for MCOMP panel
008121
£93.49

£93.49 tax excl.

Delivery 2 to 4 days

LVBT electronic level control card for MCOMP panel, single-electrode operation with a 0 to 12 minute time delay or two-electrode operation, high level and low level.
Boitier de disjoncteur seul
2 to 4 days
Motor protection circuit breaker
Circuit breaker box
004050
£11.16

£11.16 tax excl.

Delivery 2 to 4 days

Box for circuit breaker, saled without circuit breaker.
Lest clipsable pour interrupteur à flotteur NEW-T
2 to 3 days
Float switch - Regulator of level
Clip-on weight for float switch
001359
£11.16

£11.16 tax excl.

Delivery 2 to 3 days

Clip-on weight for the electric cable of a Mac 3 float level regulator, FLO-STOP.
Alimentation de secours CombiMaster 12/2000-60
3 to 5 days
Water pump control panel
CombiMaster 2000VA 230V emergency power supply
£2,532.61

£2,532.61 tax excl.

Delivery 3 to 5 days

Backup power supply for single-phase lift pump, up to 1.50 kw, automatic switching in the event of mains failure, the battery takes over, the converter provides an output voltage of 230V. Backup power supply for single-phase lift pumps, CombiMaster 12/2000-60 and CombiMaster 24/2000-60, battery cut-off, battery cables, AGM 12/160 Ah and 320 Ah battery.
Contacteur puissance Schneider LC1 400V
2 to 3 days
Motor protection circuit breaker
Contacteur puissance Schneider LC1 400V
£30.00

£30.00 tax excl.

Delivery 2 to 3 days

Three-pole contactor LC1D09V7, LC1D12V7 and LC1D18V7, 400 volt coil voltage, DIN rail or chassis mounting, NO & NC auxiliary contacts.
Boitier de commande et protection pompe de relevage monophasé
Motor protection circuit breaker
Control and protection box for single-phase lift pump
To automate a single-phase lift pump, AT-120 float switch for agitated, clear, waste and loaded water, Schneider box with on/off button, thermal reset, power contactor + thermal protection relay, control by float switch in the tank.
View
Showing 1-24 of 146 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

The electrical equipment for your pumps

Control panels, variable speed drives, pressure switches, motor protection, floats and level detectors, capacitors, cables and solenoid valves: everything that controls and protects a pump.

Selection criteria

  • Power supply: single-phase 230 V or three-phase 400 V.
  • Power or current of the motor, shown on its rating plate.
  • Function: starting, protection, pressure control or level control.

Frequently asked questions: Electrical accessories

How do I choose a control panel?

Choose it according to the power supply (single-phase or three-phase), the power or current of the motor and the number of pumps to control. Panels for two pumps alternate their operation.

What is a pressure switch used for?

It starts and stops the pump according to the pressure of the network: it opens at high pressure and closes at low pressure. Its thresholds are set according to your installation.

Variable speed drive: what is the benefit?

It adjusts the motor speed to the demand: steady pressure, fewer starts, soft start and controlled energy use. Check that it matches the voltage and the power of your motor.

Float or level probe?

A float is simple and cheap for starting and stopping a lift pump. A probe or level controller allows finer settings and protects against dry running.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.