Worksite pump

Worksite pumps are employed in public works and in the worksites, army, fire brigades, civil engineering, municipalities... These dewatering pumps are used for dewatering of mud water, drill water, rainwater, sandy water, loaded water with sediments, clay, silt, vase. Very efficients for dewatering of pond area, excavation, basement, and for the drawdown and the wells draining, mini-well, trench. Cause its have a low granulamety (passage of solid particles from between 10 to 20mm by suction) these pumps can't be use for loaded water lifting, valves water and water sewage too. Worksite pumps can be used fixed or like flood portables pumps !

HYDRO INTERVENTION 20 - 30 dewatering submersible pump
3 to 5 days
£1,381.42

£1,381.42 tax excl.

Delivery 3 to 5 days

The Tsurumi KTV pump series are very light and easy to handle. Applications: pumping of muddy water, sandy water, heavily loaded water, waste water, quarry water, building sites, industrial water, mines, public works... 400V power supply.
Pompe d'épuisement Tsurumi LB
2 to 4 days
£509.31

£509.31 tax excl.

Delivery 2 to 4 days

Pumping of rainwater, sand-loaded water, groundwater, drainage of cellars, foundations, trenches. Dewatering down to 5 cm (LB 480 and LB 800), flow rate from 225 l/min to 440 l/min (LB 1500). Semi-vortex impeller pump, for liquids from 0 to 40 °C, with solid particles of 6 mm max, delivery diameter 50 mm, threaded and barbed outlet
HYDRO 60 dewatering submersible pump : this worksite pump is used in public works or by the firefighters for their interventions in case of floods. Very high flow until 60 m3/h.
HYDROPOMPE 300 dewatering submersible used for all type of interventions : worksite, public works, firefighter. Flow very high until 250 m3/h. Use for dewatering of loaded water, back-up pump in case of flood. This pump is often used by firefighter, or still for pumping muds or drilling wastes (model 2600BP).
LSC 1.4S puddle sucker pump drainage
2 to 4 days
£1,067.46

£1,067.46 tax excl.

Delivery 2 to 4 days

LSC 1.4S PUMP - Ideal for complete drainage of flat surfaces where a sump is not available : rooftops, parking, garage, roadways underpasses, service utility pits, basements, plant maintenance cleanup, pools, and spas.
LSC 1.4S puddle sucker pump drainage
2 to 4 days
£692.11

£692.11 tax excl.

Delivery 2 to 4 days

LSC 1.4S PUMP - Ideal for complete drainage of flat surfaces where a sump is not available : rooftops, parking, garage, roadways underpasses, service utility pits, basements, plant maintenance cleanup, pools, and spas.
HYDRO INTERVENTION 20 - 30 dewatering submersible pump
2 to 4 days
£541.41

£541.41 tax excl.

Delivery 2 to 4 days

Single-phase lift pump with agitator. Ideal for draining excavations, pumping muddy site water and sand-laden drainage water, and for emptying sumps, basins and ponds, groundwater lowering, rainwater drainage and run-off water. Solids passage Ø max 7mm. Lift up to 10 m max, flow rate up to 12.4 m3/h.
Pompe de chantier portable TSURUMI HS2-75S
2 to 4 days
£689.32

£689.32 tax excl.

Delivery 2 to 4 days

Drying and draining of puddles, of liquids loaded with mud, sand, or solids up to Ø 7mm max, which require fast pumping. Flow rate up to 13.8 m3/h
HYDRO INTERVENTION 20 - 30 dewatering submersible pump
2 to 4 days
Worksite pump
215015
£745.13

£745.13 tax excl.

Delivery 2 to 4 days

Portable pump for drying and draining of puddles, of liquids loaded with mud, which require fast pumping. Flow rate up to 13.8 m3/h
Pompe à boues portable avec agitateur Tsurumi HSD Pompe à boues portable avec agitateur Tsurumi HSD 2
2 to 4 days
£1,152.58

£1,152.58 tax excl.

Delivery 2 to 4 days

Pumping of water loaded with sand, mud and thick suspended matter, thanks to the agitator which stirs the fluid, very good abrasion resistance, semi-vortex impeller and agitator made of chrome cast iron, double mechanical seal, dry running.
Pompe submersible d'épuisement chantier Tsurumi NK2-22 - NK2-22L Pompe submersible d'épuisement chantier Tsurumi NK2-22 - NK2-22L 2
2 to 4 days
£2,591.22

£2,591.22 tax excl.

Delivery 2 to 4 days

The NK pump is very resistant, built with high-quality materials, chrome cast iron semi-vortex impeller, which increases wear resistance when the water contains abrasive and corrosive particles. High flow rate for a single-phase pump, up to 48 m3/h (NK3-22L), but also delivery up to a head of 20 m (NK4-22).
Slurry pump, with agitator for easy and efficient pumping of mud and thick suspensions, very abrasion resistant, available in three models, DN80, DN100 and DN150.
Pompe de chantier avec agitateur TSURUMI KTV2
2 to 4 days
£3,055.88

£3,055.88 tax excl.

Delivery 2 to 4 days

Very robust slurry pump, abrasion resistant, with agitator to stir mud and suspended particles, available in standard version and/or reinforced version.
Pompe d'épuisement pour liquides très agressifs et corrosifs - Tsurumi KTZ
2 to 4 days
£2,414.00

£2,414.00 tax excl.

Delivery 2 to 4 days

Submersible pump in hard cast iron, high quality and very robust, for draining muddy water and very aggressive, corrosive liquids (pH 4 to 10), for deep well applications. Available from 1.50 kW to 11.00 kW.
HUNG KT dewatering worksite pump
2 to 3 days
£2,393.07

£2,393.07 tax excl.

Delivery 2 to 3 days

Cast iron submersible pump, pumping triggered by a level probe built into the pump, for use with water loaded with mud, sand, groundwater, waste water. Powers available from 1.5 to 3.7 Kw. For use in the most difficult drainage and dewatering work.
Tsurumi LB submersible dewatering pump 480A-800A Tsurumi LB submersible dewatering pump 480A-800A 2
2 to 4 days
£904.21

£904.21 tax excl.

Delivery 2 to 4 days

Submersible pump with semi-vortex impellers, in-built level sensor, automatic start & stop, for dewatering of working water, agriculture, industry, worksite... Models from 0.48kw to 0.75kw.
Pompe polyvalente aspiration basse Tsurumi LSC2.75S-51
1 to 3 days
£1,057.70

£1,057.70 tax excl.

Delivery 1 to 3 days

The bottom suction of the pump allows pumping down to 1mm on a flat surface. Use for basement draining, suction of puddles, flat roofs, car parks, garages, lift pits, roadways. The most powerful mop pump on the market, ideal for professionals, high quality pump, able to run dry, fitted with a check valve above the suction.
Pompe submersible en Titane Tsurumi TM2 Pompe submersible en Titane Tsurumi TM2 2
10 to 15 days
£1,597.71

£1,597.71 tax excl.

Delivery 10 to 15 days

Submersible pump in titanium and synthetic resin, for lifting seawater and corrosive liquids, available in 0.40 kW and 0.75 kW, also in automatic version with integrated sensor.
Showing 1-18 of 18 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Removing water from a worksite, a trench or a flooded cellar

Worksite pumps are sturdy and easy to move: submersible drainage or dewatering pumps, portable models, suction kits. They remove trench, rain or flood water, often loaded with sand or gravel.

What matters in the field

  • Free passage and wear resistance for dirty water.
  • Residual suction level: how close to the bottom the pump can empty.
  • Weight, handle and connection for quick handling and hook-up.

Frequently asked questions: Worksite pumps

Drainage pump or dewatering pump?

Drainage is about removing water continuously, dewatering about emptying standing water. The model name and the product page indicate the intended use.

Do I need a float or a level probe?

A float or probe allows automatic operation and prevents dry running. It is useful if the pump is left unattended; some models are fitted with one.

How do I choose the discharge hose?

Use a flexible hose of suitable diameter for the pump outlet, as short as possible, to limit head losses. The product page gives the outlet diameter.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.