Lift pump

Raccord male à douille crantée Laiton
2 to 4 days
Barbed fitting
Brass male hose tail fitting
€6.50

€6.50 tax excl.

Delivery 2 to 4 days

Barbed hose tail fitting for fitting onto flexible rubber and PVC hoses, tightened with a clamp, straight male threaded. Made of brass, long barb, professional quality.
Pompe à vis hélicoïdale en bronze
1 to 2 weeks
Oil transfer pump
Bronze helical screw pump
€2,725.83

€2,725.83 tax excl.

Delivery 1 to 2 weeks

Electric helical screw pump with bronze body, widely used in the marine industry for transferring and emptying waste tanks on boats, toilet waste water discharge, heavy liquid with suspended solid particles, viscous and oily liquids, waste oils, fuel oil, diesel, etc. Available in 12V, 24V, 230V and 230/400V.
Pompe submersible en Bronze DRB
4 to 6 weeks
Corrosion resistant pump
Bronze lift pump for slightly loaded liquids DRB M
€2,066.67

€2,066.67 tax excl.

Delivery 4 to 6 weeks

Submersible pump all B10 bronze, for clear or slightly loaded liquids, designed for pumping aggressive filtered chemical liquids, dyes, sea water, used in the leather industry and the marine sector. Single-phase 230 volt supply.
Pompe de relevage liquides chimiques et eau de mer DRB (tri)
4 to 6 weeks
Corrosion resistant pump
Bronze lift pump for slightly loaded liquids DRB T
€2,050.00

€2,050.00 tax excl.

Delivery 4 to 6 weeks

Submersible pump all B10 bronze, for clear or slightly loaded liquids, designed for pumping aggressive filtered chemical liquids, dyes, sea water, used in the leather industry and the marine sector. Three-phase supply, available from 0.37 to 1.50 Kw.
Clapet anti retour à boule inox 316
2 to 3 days
Check valve - Stainer filter
BSP threaded ball check valve 316 stainless steel
€223.33

€223.33 tax excl.

Delivery 2 to 3 days

Ball check valve with FPM coating, female/female threaded, all 316 stainless steel construction, available in 1" 1/4, 1" 1/2 and 2", vertical or horizontal mounting, for clear, dense and loaded liquids, for use with aggressive liquids and sea water.
Station de relevage avec pompe broyeuse Calpeda GQG 1.50 Kw Station de relevage avec pompe broyeuse Calpeda GQG 1.50 Kw 2
3 to 5 days
Sewage pump station - one pump
CAL230 GQGM lifting station with grinder pump
€1,735.00

€1,735.00 tax excl.

Delivery 3 to 5 days

Lifting station for waste water, loaded water and sewage, for a home or small housing group (1 to 20 PE). Models with or without base feet (PA), cast iron pump with 1.50 kW cutter impeller, fitted with a float switch, reinforced polyethylene tank, volume 230 L.
Micro station de relevage eaux usées domestique 40L Micro station de relevage eaux usées domestique 40L 2
3 to 5 days
Sewage pump station - one pump
CAL40 GXVM lifting station for slightly soiled water 40L
220216
€780.00

€780.00 tax excl.

Delivery 3 to 5 days

Installation in confined spaces, small footprint, lifting of water from bathrooms and sinks, and slightly loaded water with solid particles up to 25 mm, PVC discharge diameter 40. All stainless steel pump, with vertical magnetic float.
Station de relevage CALIDOUBLE-GQS-GQV Station de relevage CALIDOUBLE-GQS-GQV 2
4 to 8 days
Sewage pump station - two pumps
CALIDOUBLE PA 13 twin-pump sewage lifting station
€4,450.83

€4,450.83 tax excl.

Delivery 4 to 8 days

Twin-pump lifting station with pumps on duckfoot bends for sewage and waste water: power 1.10 kW, use up to 100 PE (population equivalents), three buried tank volumes from 780 to 1,340 L. Delivered ready to use with a control and protection panel for 2 pumps in alternation, overflow alarm, installation and maintenance manual.
Station de relevage eaux chargées - Calpeda Calidom-PA 1.10 Kw Station de relevage eaux chargées - Calpeda Calidom-PA 1.10 Kw 2
3 to 5 days
Sewage pump station - one pump
Calpeda CALIDOM PA 1.10 kW loaded water lifting station
€1,941.67

€1,941.67 tax excl.

Delivery 3 to 5 days

Lifting station for waste/loaded water from a house, pump mounted on base stand, pump extraction by guide rails, fully equipped station, ready to be connected. Available in 5 tank models from 315 to 870 litres, power 1.10 kW single-phase.
Station de relevage CALIDOUBLE-GQS-GQV Station de relevage CALIDOUBLE-GQS-GQV 2
4 to 8 days
Sewage pump station - two pumps
CALPEDA CALIDOUBLE PA 8 lift station 2 water loaded pumps
€4,280.00

€4,280.00 tax excl.

Delivery 4 to 8 days

CALPEDA CALIDOUBLE PA 8 sewage lifting station 2 x pumps. CALIDOUBLE PA 8 lifting 2 x pumps, is mouting on a base. Ideal for lift of sewage water or loaded water. Power rate to 0.55kw. Using for group of home, or individual. Available in 3 cisterns size : 780L, 1060L and 1340L.
DAB NOVA Automatic submersible pump
2 to 4 days
Domestic pump
Calpeda GM10 automatic submersible pump
200015
€306.67

€306.67 tax excl.

Delivery 2 to 4 days

Calpeda GM10 automatic submersible pump with vortex impeller, often used for pumping cellar : for clear water or slightly contaminated water. Equiped with switch float for automatic starting. Power 0.30 kw.
Pompe broyeuse à roue dilacératrice Calpeda GQG 6 Pompe broyeuse à roue dilacératrice Calpeda GQG 6 2
Last items in stock
Macerator pump
CALPEDA GQG 6 Submersible pump drainage and sewage
€967.50

€967.50 tax excl.

Last items in stock

Submersible pumps with high power grinder, with horizontal flanged and threaded delivery port (DN 32 – G 1 1/2”).Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.
Pompe de drainage inox pour eau propre ou chargée GXV Pompe de drainage inox pour eau propre ou chargée GXV 2
2 to 4 days
Domestic sewage pump
CALPEDA GXVM dewatering pump 230V for clean or waste water
€334.17

€334.17 tax excl.

Delivery 2 to 4 days

CALPEDA GXVM submersible pump for dewatering of clean or waste water in all stainless steel 304, with vortex impeller, and ball float switch for the automatic switching on and off. Available in 3 models : 0.25kw, 0.37kw and 0.45kw.
CALPEDA wastewater & black water sewage pump kit - DN 50
3 to 5 days
Domestic sewage pump
CALPEDA wastewater & black water sewage pump kit - DN 50
€1,020.83

€1,020.83 tax excl.

Delivery 3 to 5 days

This unit is delivery with a sewage pump with vortex impeller, power 0.55 Kw, 0.75 Kw or 1.10 Kw, equiped with automatic float, and discharge column, with check valve specially designed for wastewater , and 3m pvc high pressure tubing Ø63, PVC-U Ø63 ball valve, and outlet connections.
Embase fonte pompe ZENIT
2 to 4 days
Accessories for lifting
Cast iron base plate for ZENIT pump - 9024.006
112524
€97.50

€97.50 tax excl.

Delivery 2 to 4 days

Cast iron base with 3 arms for free-standing installation of ZENIT pump. (see model below).
Embase fonte pompe ZENIT
2 to 4 days
Accessories for lifting
Cast iron base plate for ZENIT pump - 9024.009
112526
€551.84

€551.84 tax excl.

Delivery 2 to 4 days

Cast iron base with 4 arms for free-standing installation of ZENIT pump. (see model below).
Embase fonte pompe ZENIT
2 to 4 days
Accessories for lifting
Cast iron base plate for ZENIT pump - 9024.010
112523
€80.00

€80.00 tax excl.

Delivery 2 to 4 days

Cast iron base with 3 arms for free-standing installation of ZENIT pump, (- DGO 150-200/2/G65V-65-80 - DGF 150-200/2/G65V-65-80).
Clapet anti-retour Fonte taraudé F/F
2 to 4 days
Check valve - Stainer filter
Cast iron check valve threaded F/F
€68.33

€68.33 tax excl.

Delivery 2 to 4 days

Cast iron body, NBR-coated aluminium ball, with inspection hatch, horizontal or vertical mounting with upward flow. For use in water supply, distribution and drainage.
Coude en fonte à bride PN10 refoulement pompe
2 to 4 days
Accessories for lifting
Cast iron flanged elbow PN10 for pump delivery
€160.00

€160.00 tax excl.

Delivery 2 to 4 days

Cast iron lift pump outlet elbow, standard PN10 flanged connection, available in DN65, DN150, DN200 and DN250, supplied with gaskets and A2 stainless steel bolts.
Pompe broyeuse Grinder Fonte 100
2 to 3 days
Macerator pump
Cast iron grinder pump - Grinder 100
€746.67

€746.67 tax excl.

Delivery 2 to 3 days

Lift pump with hardened stainless steel grinder, for lifting waste water, loaded water and black water from a dwelling, power 0.75 Kw, single-phase supply, with float, DN50 2" outlet.
Kit pompe de relevage Fonte roue vortex DN80 - KV (4 pôles)
1 to 2 weeks
Septic pump
Cast iron lift pump kit vortex impeller DN80 - PA-KV (4 poles)
€2,883.33

€2,883.33 tax excl.

Delivery 1 to 2 weeks

Vortex impeller lift pump, G20 cast iron construction, mounted on cast iron base feet, epoxy-painted steel support base, stainless steel bolts, for lifting loaded water containing suspended solids, stringy matter and sludge. Standard flange delivery DN80, free passage 79 mm, 4-pole motor, (1450 rpm), power 1.50, 2.20 and 3.00 kW, flow rate up to 78 m3/h.
Pompe de relevage Fonte roue vortex DN65-DN80 Pompe de relevage Fonte roue vortex DN65-DN80 2
1 to 2 weeks
Septic pump
Cast iron lift pump vortex impeller DN65-DN80 - KV (2 poles)
€2,495.83

€2,495.83 tax excl.

Delivery 1 to 2 weeks

G20 cast iron submersible pump, with vortex impeller, for lifting loaded water containing suspended solids, stringy matter and sludge. Standard flange delivery DN65 or DN80, power 4.00, 5.50 and 7.50 kW, flow rate up to 120 m3/h.
Showing 25-48 of 228 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides