Electrics accessories

Essential electrical accessories for connecting pump installations, pumping stations, lifting stations...

Variable speed drives
Water pump control panel
Pressure switch
Pump automation
Float switch - Regulator of level
Motor protection circuit breaker
Cable
Coupling
Level regulator
Pressure control
Condensator
Solenoid valve
Coffret de commande avec inverseur de source groupe électgrogène - COMMANDER
1 to 2 weeks
Water pump control panel
Automatic generator start panel - COMMANDER
422001
$1,113.57

$1,113.57 tax excl.

Delivery 1 to 2 weeks

Control and protection unit with automatic mains/generator changeover, digital LED display, built-in battery charger, control of petrol or diesel generator set, single-phase or three-phase, remote start possible. Many programmable functions, alarm output.
Platine pour 1 ou 2 électrodes de niveau coffret MCOMP
2 to 4 days
Water pump control panel
Board for 1 or 2 level electrodes for MCOMP panel
008121
$124.76

$124.76 tax excl.

Delivery 2 to 4 days

LVBT electronic level control card for MCOMP panel, single-electrode operation with a 0 to 12 minute time delay or two-electrode operation, high level and low level.
Armoire de commande avec variateur de vitesse EASY INVERTER-1 Armoire de commande avec variateur de vitesse EASY INVERTER-1 2
2 to 3 weeks
Variable speed drives
Control cabinet with speed controller EASY INVERTER-1
$1,631.25

$1,631.25 tax excl.

Delivery 2 to 3 weeks

Control and protection cabinet for 1 three-phase surface or submersible pump, use with clean or waste water, built-in frequency converter, variable speed pump operation, no mechanical stress, total motor protection, energy saving, high efficiency, multifunction screen.
Coffret de gestion 2 pompes QTLD 2D
2 to 4 days
Water pump control panel
Control panel for 2 lift pumps Single-phase QML/A 2D 12A-FA
008033
$740.21

$740.21 tax excl.

Delivery 2 to 4 days

Control and protection panel for 2 single-phase lift pumps, adjustment from 1 to 12A. Allows alternating operation of the pumps, thermal protection.
Coffret de gestion 2 pompes QTLD 2D
2 to 4 days
Water pump control panel
Control panel for 2 lift pumps Three-phase QTLD 2D
008032
$801.66

$801.66 tax excl.

Delivery 2 to 4 days

Control and protection panel for 2 three-phase lift pumps, adjustment from 1 to 12 A. Allows alternating operation of the pumps with two floats as well as simultaneous operation with three floats, thermal protection.
Coffret de gestion 2 pompes QTLD 2D
2 to 4 days
Water pump control panel
Control panel for lift pump (230V) QML/A 1D
008034
$559.58

$559.58 tax excl.

Delivery 2 to 4 days

Control & protection panel for a single-phase lift pump, adjustment from 1 to 12 A. Automatic operation with 1 or 2 level floats + 1 alarm level float.
Coffret de gestion 2 pompes QTLD 2D
2 to 4 days
Water pump control panel
Control panel for lift pump (400V) QTLD 1D
008035
$614.51

$614.51 tax excl.

Delivery 2 to 4 days

Control and protection panel for a three-phase lift pump, adjustment from 1 to 12 A. Automatic operation with 1 or 2 level floats + 1 alarm level float (high level, overflow).
Coffret de commande et protection 2 pompes de relevage monophasé DUPLEX Coffret de commande et protection 2 pompes de relevage monophasé DUPLEX 2
2 to 4 days
Water pump control panel
DUPLEX single-phase 2 lift pump control and protection panel
008157
$451.57

$451.57 tax excl.

Delivery 2 to 4 days

Starter panel for two single-phase lift pumps of 0.37 to 2.20 Kw, pump alternation, adjustable thermal protection, operation with floats or pressure switch, level alarm outputs, use with clean water or waste/loaded water pumps.
Coffret de commande et protection 2 pompes de relevage triphasé DUPLEX-UP Coffret de commande et protection 2 pompes de relevage triphasé DUPLEX-UP 2
2 to 4 days
Water pump control panel
DUPLEX three-phase 2 lift pump control and protection panel
008156
$482.30

$482.30 tax excl.

Delivery 2 to 4 days

Starter panel for two three-phase lift pumps of 0.55 to 7.50 Kw, pump alternation, adjustable thermal protection, operation with floats or pressure switch, level alarm outputs, use with clean water or waste/loaded water pumps.
Kit convertisseur de tension ECOBOX 600 Kit convertisseur de tension ECOBOX 600 2
Water pump control panel
ECOBOX 600 VA emergency power supply
The Ecobox 600 unit rectifies 230 volt (50Hz) single-phase alternating current into 12 volt direct current, which is stored in a battery, it then inverts the 12 volt direct current into 230 volt single-phase alternating current, battery autonomy is 1 h to 2 h 30 min (depending on model). Output power 370 watts.
View
Alimentation de secours Enerbox 1300 VA Alimentation de secours Enerbox 1300 VA 2
1 to 2 weeks
Water pump control panel
Enerbox 1300 VA emergency power supply
$1,573.52

$1,573.52 tax excl.

Delivery 1 to 2 weeks

The Enerbox 1300 unit rectifies 230 volt (50Hz) single-phase alternating current into 12 volt direct current, stored in a battery, then inverts the 12 volt direct current into 230 volt single-phase alternating current; battery autonomy is from 1 h to 4 h 00 (depending on model). Output power 600 watts, for a lift pump of 600 watts max. Integrated GSM module.
Alimentation de secours Enerbox 1700 VA Alimentation de secours Enerbox 1700 VA 2
2 to 3 weeks
Water pump control panel
Enerbox 2100 VA backup power supply
$2,113.55

$2,113.55 tax excl.

Delivery 2 to 3 weeks

The Enerbox 2100 unit rectifies 230 volt (50Hz) single-phase alternating current into 12 volt direct current, stored in a battery, it then inverts the 12 volt direct current into 230 volt single-phase alternating current, battery autonomy is 1 h to 2 h 00 (depending on model). Output power 1100 watts, for a lift pump of 1.10 Kw max. Built-in GSM module.
Alimentation de secours Enerbox 3100 VA Alimentation de secours Enerbox 3100 VA 2
2 to 3 weeks
Water pump control panel
Enerbox 3100 VA emergency power supply
$2,728.06

$2,728.06 tax excl.

Delivery 2 to 3 weeks

The Enerbox 3100 unit rectifies 230 volt (50Hz) single-phase alternating current into 12 volt direct current, stored in a battery,then inverts the 12 volt direct current into 230 volt single-phase alternating current; battery autonomy is from 1 h to 4 h 00 (depending on model). Output power 1500 watts, to back up a lift pump of 1.50 Kw max. Integrated GSM...
Alimentation de secours Enerbox 5100 VA Alimentation de secours Enerbox 5100 VA 2
2 to 3 weeks
Water pump control panel
Enerbox 5100 VA emergency power supply
$3,361.19

$3,361.19 tax excl.

Delivery 2 to 3 weeks

The Enerbox 5100 unit rectifies 230 volt (50Hz) single-phase alternating current into 12 volt direct current, stored in a battery,then inverts the 12 volt direct current into 230 volt single-phase alternating current; battery autonomy is from 1 h to 2 h 00 (depending on model). Output power 2300 watts, for a lift pump of 2.30 Kw max. Integrated GSM...
Alimentation de secours Enerbox 900 VA Alimentation de secours Enerbox 900 VA 2
2 to 3 weeks
Water pump control panel
Enerbox 900 VA emergency power supply
$1,536.28

$1,536.28 tax excl.

Delivery 2 to 3 weeks

The Enerbox 900 box rectifies 230 volt single-phase alternating current (50Hz) into 12 volt direct current, stored in a battery, it then inverts the 12 volt direct current into 230 volt single-phase alternating current, battery autonomy is 1 h to 3 h 00 (depending on model). Output power 450 watts, for a lift pump of 450 watts max. Built-in GSM transmitter.
Boitier de gestion alimentation ENERBOX Boitier de gestion alimentation ENERBOX 2
2 to 3 weeks
Water pump control panel
ENERBOX power supply management box
$131.28

$131.28 tax excl.

Delivery 2 to 3 weeks

Control and management box for one or two lift pumps, for controlling two floats, Start/Stop and tank overflow alarm. Fits on ENERBOX emergency power supplies.
Condensateurs
2 to 3 days
Condensator
Fix condensator
$7.84

$7.84 tax excl.

Delivery 2 to 3 days

Component that store electrical charge in an electrical field.
H07RN-F electric cable
Cable
H07RN-F electric cable
H07RN-F cable have an hight flexibility and is very resistant to weather, thermal stresses, mechanical and with oils and greases. Ideal for the equipment of a pump.
View
Alarme cuve "trop plein" pour coffret QML - QTL - PFC
2 to 4 days
Water pump control panel
Overflow alarm panel 230 V with backup battery
007049
$530.71

$530.71 tax excl.

Delivery 2 to 4 days

Audible alarm and flashing red light signalling, 230V single-phase power supply, with back-up battery, for stand-alone operation in the event of a power cut. Terminal blocks with dry contact for fault reporting, connection of a float.
Variateur de vitesse pompe (mono 230V - mono 230V) EASYMAT MM Variateur de vitesse pompe (mono 230V - mono 230V) EASYMAT MM 2
2 to 4 days
Variable speed drives
Pump speed controller (single-phase 230V - three-phase 230V) EASYMAT MT
009114
$924.56

$924.56 tax excl.

Delivery 2 to 4 days

Panel fitted with a compact variable speed system, residual pressure control for centrifugal pump . The drive is mounted on the delivery pipework, supplied with 1/4" pressure sensor and 1.5 m of cable. Single-phase 230V supply voltage - Three-phase 230V output voltage.
Coffret de comande te protection pompe monophasé - SIMPLEX Coffret de comande te protection pompe monophasé - SIMPLEX 2
2 to 4 days
Water pump control panel
SIMPLEX single-phase pump control and protection panel
008177
$303.53

$303.53 tax excl.

Delivery 2 to 4 days

Electronic direct-on-line starter panel for a single-phase pump of 0.37 to 2.20 Kw, applications for surface pumps, lift pumps, submersible pumps. Operation with floats, pressure switch or level probes.
Coffret de comande et protection pompe triphasé - SIMPLEX
2 to 4 days
Water pump control panel
SIMPLEX three-phase pump control and protection panel
$326.81

$326.81 tax excl.

Delivery 2 to 4 days

Electronic direct-on-line starter panel for a three-phase pump of 0.55 to 7.50 Kw, applications for surface pumps, lift pumps, submersible pumps. Operation with floats, pressure switch or level probes.
Coffret de commande et protection pompe monophasé (MCOMP)
2 to 4 days
Water pump control panel
Single-phase pump control and protection panel (MCOMP)
$220.67

$220.67 tax excl.

Delivery 2 to 4 days

Single-phase 230 volt electrical panel for the control and thermal protection of a submersible borehole pump, well pump, sump lift pump or decompression well pump. On/Off switch, terminal block for connecting the power supply, pump and remote control (float or pressure switch). LVBT board option, operation with one or two level electrodes.
Showing 1-24 of 34 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

The electrical equipment for your pumps

Control panels, variable speed drives, pressure switches, motor protection, floats and level detectors, capacitors, cables and solenoid valves: everything that controls and protects a pump.

Selection criteria

  • Power supply: single-phase 230 V or three-phase 400 V.
  • Power or current of the motor, shown on its rating plate.
  • Function: starting, protection, pressure control or level control.

Frequently asked questions: Electrical accessories

How do I choose a control panel?

Choose it according to the power supply (single-phase or three-phase), the power or current of the motor and the number of pumps to control. Panels for two pumps alternate their operation.

What is a pressure switch used for?

It starts and stops the pump according to the pressure of the network: it opens at high pressure and closes at low pressure. Its thresholds are set according to your installation.

Variable speed drive: what is the benefit?

It adjusts the motor speed to the demand: steady pressure, fewer starts, soft start and controlled energy use. Check that it matches the voltage and the power of your motor.

Float or level probe?

A float is simple and cheap for starting and stopping a lift pump. A probe or level controller allows finer settings and protects against dry running.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.