Lift pump

Submersible lift pumps for waste water, loaded water, rainwater, sand-laden water, aggressive liquids, thick liquids, ATEX lift pumps, construction site pumps, as well as accessories for lift pump installations, such as base stands, guide rails, float switches and level regulators, Piezo probe, control panels, overflow alarms, pipes, lift pump outlet kits, non-return valves, galvanised cast iron fittings, pressure PVC, 316 stainless steel.

Domestic pump
Dewatering pump
Domestic sewage pump
Septic pump
Sewage pump station - one pump
Sewage pump station - two pumps
Macerator pump
Corrosion resistant pump
Worksite pump
Accessories for lifting
Lifting micro-station
12/24V lifting pump
Active filters
HYDRO INTERVENTION 20 - 30 dewatering submersible pump
3 to 5 days
Worksite pump
Aluminium drainage pump TSURUMI KTV
£1,381.42

£1,381.42 tax excl.

Delivery 3 to 5 days

The Tsurumi KTV pump series are very light and easy to handle. Applications: pumping of muddy water, sandy water, heavily loaded water, waste water, quarry water, building sites, industrial water, mines, public works... 400V power supply.
Pompe d'épuisement Tsurumi LB
2 to 4 days
Worksite pump
Dewatering pump Tsurumi LB
£509.31

£509.31 tax excl.

Delivery 2 to 4 days

Pumping of rainwater, sand-loaded water, groundwater, drainage of cellars, foundations, trenches. Dewatering down to 5 cm (LB 480 and LB 800), flow rate from 225 l/min to 440 l/min (LB 1500). Semi-vortex impeller pump, for liquids from 0 to 40 °C, with solid particles of 6 mm max, delivery diameter 50 mm, threaded and barbed outlet
Pompe de drainage vortex POMA Pompe de drainage vortex POMA 2
2 to 4 days
Domestic sewage pump
Lift pump with vortex impeller POMA
210250
£459.08

£459.08 tax excl.

Delivery 2 to 4 days

Ideal for small lifting installations for domestic waste water, rainwater. Compact dimensions, automatic operation, anti-clogging vortex impeller, body, impeller and cover made of reinforced resin, free passage 35mm, 2" female outlet. Power 0.15 Kw.
LSC 1.4S puddle sucker pump drainage
2 to 4 days
Worksite pump
LSC 1.4S puddle sucker pump drainage
205240
£1,067.46

£1,067.46 tax excl.

Delivery 2 to 4 days

LSC 1.4S PUMP - Ideal for complete drainage of flat surfaces where a sump is not available : rooftops, parking, garage, roadways underpasses, service utility pits, basements, plant maintenance cleanup, pools, and spas.
LSC 1.4S puddle sucker pump drainage
2 to 4 days
Worksite pump
LSC 1.4S puddle sucker pump drainage
205155
£692.11

£692.11 tax excl.

Delivery 2 to 4 days

LSC 1.4S PUMP - Ideal for complete drainage of flat surfaces where a sump is not available : rooftops, parking, garage, roadways underpasses, service utility pits, basements, plant maintenance cleanup, pools, and spas.
HYDRO INTERVENTION 20 - 30 dewatering submersible pump
2 to 4 days
Worksite pump
Portable construction site pump TSURUMI HS2-4S
£541.41

£541.41 tax excl.

Delivery 2 to 4 days

Single-phase lift pump with agitator. Ideal for draining excavations, pumping muddy site water and sand-laden drainage water, and for emptying sumps, basins and ponds, groundwater lowering, rainwater drainage and run-off water. Solids passage Ø max 7mm. Lift up to 10 m max, flow rate up to 12.4 m3/h.
Pompe de chantier portable TSURUMI HS2-75S
2 to 4 days
Worksite pump
Portable site pump TSURUMI HS2-75S
£689.32

£689.32 tax excl.

Delivery 2 to 4 days

Drying and draining of puddles, of liquids loaded with mud, sand, or solids up to Ø 7mm max, which require fast pumping. Flow rate up to 13.8 m3/h
HYDRO INTERVENTION 20 - 30 dewatering submersible pump
2 to 4 days
Worksite pump
Portable site pump TSURUMI HS3-75S
215015
£745.13

£745.13 tax excl.

Delivery 2 to 4 days

Portable pump for drying and draining of puddles, of liquids loaded with mud, which require fast pumping. Flow rate up to 13.8 m3/h
Pompe à boues portable avec agitateur Tsurumi HSD Pompe à boues portable avec agitateur Tsurumi HSD 2
2 to 4 days
Worksite pump
Portable sludge pump with agitator Tsurumi HSD2-55S
215312
£1,152.58

£1,152.58 tax excl.

Delivery 2 to 4 days

Pumping of water loaded with sand, mud and thick suspended matter, thanks to the agitator which stirs the fluid, very good abrasion resistance, semi-vortex impeller and agitator made of chrome cast iron, double mechanical seal, dry running.
Pompe submersible d'épuisement chantier Tsurumi NK2-22 - NK2-22L Pompe submersible d'épuisement chantier Tsurumi NK2-22 - NK2-22L 2
2 to 4 days
Worksite pump
Site pump (single-phase) Tsurumi NK4-22 - NK3-22L
£2,591.22

£2,591.22 tax excl.

Delivery 2 to 4 days

The NK pump is very resistant, built with high-quality materials, chrome cast iron semi-vortex impeller, which increases wear resistance when the water contains abrasive and corrosive particles. High flow rate for a single-phase pump, up to 48 m3/h (NK3-22L), but also delivery up to a head of 20 m (NK4-22).
Pompe de chantier avec agitateur TSURUMI KRS2
Worksite pump
Site pump with agitator TSURUMI KRS2
Slurry pump, with agitator for easy and efficient pumping of mud and thick suspensions, very abrasion resistant, available in three models, DN80, DN100 and DN150.
View
Pompe de chantier avec agitateur TSURUMI KTV2
2 to 4 days
Worksite pump
Site pump with agitator TSURUMI KTV2
£3,055.88

£3,055.88 tax excl.

Delivery 2 to 4 days

Very robust slurry pump, abrasion resistant, with agitator to stir mud and suspended particles, available in standard version and/or reinforced version.
Pompe submersible en inox Tsurumi SQ Pompe submersible en inox Tsurumi SQ 2
10 to 15 days
Corrosion resistant pump
Stainless steel 304 submersible pump Tsurumi SQ
£1,555.85

£1,555.85 tax excl.

Delivery 10 to 15 days

Pumping of slightly corrosive liquids and food-grade liquids, the Tsurumi SQ pump is made entirely of 304 stainless steel, available in 0.40 kW and 0.75 kW.
Pompe hacheuse à couteau Tsurumi C
2 to 4 days
Macerator pump
Tsurumi C chopper pump with cutters
£1,259.33

£1,259.33 tax excl.

Delivery 2 to 4 days

Pumping of waste and loaded water that may contain fabrics, wipes, plastic bottles, strawy slurry, cattle and pig slurry. Pump supplied with feet and outlet elbow, available from 0.75 kW to 11.00 kW, 50, 80 and 100 mm delivery, three-phase supply.
Pompe broyeuse
3 to 5 days
Macerator pump
Tsurumi CR chopper pump with cutting blades (high pressure)
£2,654.01

£2,654.01 tax excl.

Delivery 3 to 5 days

High-pressure knife-type chopper pump, for lifting waste and loaded water that may contain fabrics, wipes, plastic bottles, aluminium cans, strawy slurry, cattle and pig slurry. Pump supplied with feet and outlet elbow, available from 2.20 kW to 11.00 kW, three-phase supply.
Pompe d'épuisement pour liquides très agressifs et corrosifs - Tsurumi KTZ
2 to 4 days
Worksite pump
Tsurumi KTZ submersible drainage and dewatering pump
£2,414.00

£2,414.00 tax excl.

Delivery 2 to 4 days

Submersible pump in hard cast iron, high quality and very robust, for draining muddy water and very aggressive, corrosive liquids (pH 4 to 10), for deep well applications. Available from 1.50 kW to 11.00 kW.
HUNG KT dewatering worksite pump
2 to 3 days
Worksite pump
Tsurumi KTZE dewatering worksite pump
£2,393.07

£2,393.07 tax excl.

Delivery 2 to 3 days

Cast iron submersible pump, pumping triggered by a level probe built into the pump, for use with water loaded with mud, sand, groundwater, waste water. Powers available from 1.5 to 3.7 Kw. For use in the most difficult drainage and dewatering work.
Tsurumi LB submersible dewatering pump 480A-800A Tsurumi LB submersible dewatering pump 480A-800A 2
2 to 4 days
Dewatering pump
Tsurumi LB submersible dewatering pump 480A-800A
£904.21

£904.21 tax excl.

Delivery 2 to 4 days

Submersible pump with semi-vortex impellers, in-built level sensor, automatic start & stop, for dewatering of working water, agriculture, industry, worksite... Models from 0.48kw to 0.75kw.
Pompe polyvalente aspiration basse Tsurumi LSC2.75S-51
1 to 3 days
Domestic pump
Tsurumi LSC2.75S-51 multi-purpose low suction pump
£1,057.70

£1,057.70 tax excl.

Delivery 1 to 3 days

The bottom suction of the pump allows pumping down to 1mm on a flat surface. Use for basement draining, suction of puddles, flat roofs, car parks, garages, lift pits, roadways. The most powerful mop pump on the market, ideal for professionals, high quality pump, able to run dry, fitted with a check valve above the suction.
Pompe submersible en Titane Tsurumi TM2 Pompe submersible en Titane Tsurumi TM2 2
10 to 15 days
Dewatering pump
Tsurumi TM titanium submersible pump
£1,597.71

£1,597.71 tax excl.

Delivery 10 to 15 days

Submersible pump in titanium and synthetic resin, for lifting seawater and corrosive liquids, available in 0.40 kW and 0.75 kW, also in automatic version with integrated sensor.
Flotteur universel pour tout type de pompe et motopompe
3 to 5 days
Engine driven pumps accessories
Universal float for pump and engine-driven pump
£478.61

£478.61 tax excl.

Delivery 3 to 5 days

The universal float is suitable for all types of retention basins, watercourses, ponds, lakes, sea, swimming pools, used to carry all models of submersible pumps, surface pumps, agitators, aerators, engine-driven pumps. Max load 70 Kg for the float alone + 70 Kg for the foam insert.
Pompe vide cave Vortex - TSURUMI OMA4
2 to 4 days
Domestic pump
Vortex basement drainage pump - TSURUMI OMA5
210313
£439.54

£439.54 tax excl.

Delivery 2 to 4 days

Pump made of reinforced resin and stainless steel, very resistant to aggressive liquids, fitted with a recessed Vortex impeller, which limits abrasion effects and prevents blocking. Free passage 10 mm, power 0.15 kW, max flow rate 10 m3/h, max head 7.5 m.
Showing 1-22 of 22 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

How to choose a lift pump

Three criteria guide the choice: the type of water to be removed, the flow rate you need and the discharge head. A lift pump moves clean, loaded or waste water to a higher or more distant point: sewer, ditch, sump or tank.

Clean water, loaded water, waste water: the right model

  • Clean water (flooded cellar, rainwater, draining): cellar drainage pump or drainage pump.
  • Loaded water (light mud, building sites): pump with a wide free passage or a vortex impeller.
  • Waste water (toilets, kitchen, basement): sewage pump, lift station with tank, or grinder pump.

Which category should you choose?

For a detailed comparison: Choosing a lift pump.

Accessories for a lift installation

Complete the pump with a non-return valve, a float or level detector, a control panel, a high-level alarm and a mounting base. These accessories are available in the lift accessories and control panels categories of the shop.

Frequently asked questions: Lift pumps

What is the difference between a cellar pump, a loaded-water pump and a sewage pump?

A cellar or drainage pump removes clear or lightly loaded water (flooded cellar, sump, rainwater). A loaded-water pump lets suspended particles pass (light mud, fine gravel). A sewage pump has a large free passage for the solids found in domestic waste water. Each product page gives the free passage, i.e. the maximum particle size the pump accepts.

When should I choose a grinder pump?

A grinder pump removes the waste of a toilet, washbasin or shower installed below the level of the sewer (basement, extension). It grinds the solids and pushes them through a small-diameter pipe over a significant height or distance. Follow the manufacturer's instructions for connection and discharge.

How do I choose the flow rate and the head?

The total head is the vertical height to climb, plus the friction losses in pipes and bends. Choose a pump whose performance curve gives at least the flow you need at that head, and keep a margin. A pipe that is too long or too narrow reduces the real flow noticeably.

Do I need a non-return valve and an alarm?

A non-return valve on the discharge pipe stops water from flowing back into the tank each time the pump stops. A high-level alarm warns you of a failure or a blockage before the tank overflows.

Single-phase or three-phase: which power supply?

Small and medium pumps run on single-phase 230 V, like a household socket. High-power pumps (public bodies, industry, lift stations) are available in three-phase 400 V. 12 V and 24 V models also exist for mobile installations.

Lift pump or lift station?

A submersible pump placed at the low point is enough to empty a cellar from time to time. As soon as drainage is permanent (sanitary fittings, kitchen or a basement room), you install a lift station: a sealed tank, one or more pumps, a level control and a non-return valve. Two pumps take turns and keep the service running if one fails.

Which pump for a basement bathroom?

For the water from toilets, shower and washbasin: a sewage pump, a macerator pump or a lifting micro-station with built-in grinder, depending on the discharge point. Check the free passage and the discharge diameter on the product page. The detail is in the guide Choosing a lift pump.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.