Electrics accessories

Essential electrical accessories for connecting pump installations, pumping stations, lifting stations...

Variable speed drives
Water pump control panel
Pressure switch
Pump automation
Float switch - Regulator of level
Motor protection circuit breaker
Cable
Coupling
Level regulator
Pressure control
Condensator
Solenoid valve
Coffret alarme niveau haut Coffret alarme niveau haut 2
2 to 4 days
Water pump control panel
Alarm panel with battery backup - ALARME-TOP
007098
$197.39

$197.39 tax excl.

Delivery 2 to 4 days

High level detection panel for tank, lifting station, with power-on and alarm indicator lights, detection by a level float, 230 volt supply, 9V rechargeable battery, 90 dB buzzer, rotating beacon, test button, reset, alarm output contact, with mains power cable.
Kit d'automatisme pour réservoir à vessie - E/S 1" Kit d'automatisme pour réservoir à vessie - E/S 1" 2
Last items in stock
Pressure switch
Automatic functioning set for surface pump 230V
$132.21

$132.21 tax excl.

Last items in stock

This automatic kit in single-phase, is designed to connect and to do automatic functioning of surface pump, and bladder tank too (on-line, spherical or horizontal). The contactor permit to connect a surface pump single-phase.
Alimentation de secours CombiMaster 12/2000-60
3 to 5 days
Water pump control panel
CombiMaster 2000VA 230V emergency power supply
$3,379.81

$3,379.81 tax excl.

Delivery 3 to 5 days

Backup power supply for single-phase lift pump, up to 1.50 kw, automatic switching in the event of mains failure, the battery takes over, the converter provides an output voltage of 230V. Backup power supply for single-phase lift pumps, CombiMaster 12/2000-60 and CombiMaster 24/2000-60, battery cut-off, battery cables, AGM 12/160 Ah and 320 Ah battery.
Boitier de commande et protection pompe de relevage monophasé
Motor protection circuit breaker
Control and protection box for single-phase lift pump
To automate a single-phase lift pump, AT-120 float switch for agitated, clear, waste and loaded water, Schneider box with on/off button, thermal reset, power contactor + thermal protection relay, control by float switch in the tank.
View
Boitier de commande et protection pompe de relevage triphasé
2 to 4 days
Motor protection circuit breaker
Control and protection box for three-phase lift pump
$312.84

$312.84 tax excl.

Delivery 2 to 4 days

Control and protection box for a three-phase lift pump from 0.55 Kw to 11.00 Kw, AT-120 float switch for agitated, clear, waste and loaded water, Schneider box with on/off button, thermal reset, power contactor + thermal protection relay, control by float switch in the tank.
Gestionnaire électronique de contrôle et protection pompe mono (OPTIMATIC) Gestionnaire électronique de contrôle et protection pompe mono (OPTIMATIC) 2
2 to 3 days
Pump automation
Electronic pump controller COELBO OPTIMATIC
009174
$102.42

$102.42 tax excl.

Delivery 2 to 3 days

Compact device for the control and protection of a single-phase surface or submersible pump, patented operation, fitted with an electronic flow and pressure sensor, lack-of-water safety at the suction, the optimatic replaces the pressure switch, the bladder pressure tank and the check valve, the device starts the pump as soon as a tap is opened, and stops...
Interrupteur de niveau à flotteur BIP STOP Interrupteur de niveau à flotteur BIP STOP 2
2 to 3 days
Float switch - Regulator of level
FLO STOP float level switch for small pumps
$33.52

$33.52 tax excl.

Delivery 2 to 3 days

FLO STOP Float level switch for small pumps for application with slightly aggressive liquids, and highly appreciated in agitated liquids - Switching angle + or - 110º - Maximum pressure : 3,5 bars.
Float switch + 2P remote-control connection plug
2 to 4 days
Float switch - Regulator of level
Float switch + 2P remote-control connection plug
$74.49

$74.49 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Float switch + 2P remote-control connection plug
2 to 4 days
Recovery of rainwater
Float switch + 2P remote-control connection plug
$79.14

$79.14 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Float switch + 2P remote-control connection plug
2 to 4 days
Float switch - Regulator of level
Float switch + 2P remote-control connection plug
$74.49

$74.49 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Float switch + 2P remote-control connection plug
2 to 4 days
Float switch - Regulator of level
Float switch + 2P remote-control connection plug
$79.14

$79.14 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Interrupteur à flotteur pour pompe vide cale Interrupteur à flotteur pour pompe vide cale 2
2 to 3 days
Float switch - Regulator of level
Float switch for bilge pump
001405
$44.69

$44.69 tax excl.

Delivery 2 to 3 days

Float switch for 12 or 24 volt bilge pump, automatic pump operation according to the water level, starts at 55 mm and stops at 25 mm from the floor, max 10 amps, above that, use a relay.
Connecteur étanche démontable IP68 Connecteur étanche démontable IP68 2
2 to 3 days
Coupling
IP68 demountable watertight connector
$19.83

$19.83 tax excl.

Delivery 2 to 3 days

It allows safe connection between two electrical cables, 3 or 4 wires, IP68, replacing heat-shrink sleeves or watertight joints. For electrical cables from 0.5 to 1.5 mm².
Boitier de commande pompe électronique MARCO - PCS 12/24V Boitier de commande pompe électronique MARCO - PCS 12/24V 2
2 to 3 days
Water pump control panel
MARCO electronic pump control box - PCS 12/24V
008216
$81.93

$81.93 tax excl.

Delivery 2 to 3 days

Allows remote monitoring of pump operation: it is possible to see when the pump is running and whether there is still liquid to transfer. In case of shutdown due to lack of liquid or overload, the alert can be reset and the system restarted without having to switch off the unit. Finally, the pump can be disabled and restarted at the push of a button.
Contacteur manométrique avec manomètre PM5
2 to 4 days
Pressure switch
Pressure switch with pressure gauge PM5
001214
$44.69

$44.69 tax excl.

Delivery 2 to 4 days

0-6 bar pressure switch with pressure gauge and built-in fittings for screwing directly onto pump and tank. Factory setting 1.5 to 2.8 bar, food grade quality.
OPTIPLUS dispositif automatique pour le contrôle intégral des pompes
2 to 4 days
Pump automation
Pump control and protection manager single-phase 1"1/4
009200
$137.80

$137.80 tax excl.

Delivery 2 to 4 days

Compact device for the control and protection of a single-phase surface or submersible pump of 2.20 kW max, patented operation, fitted with an electronic flow and pressure sensor, water shortage safety on suction, the optimatic replaces the pressure switch, the bladder tank and the check valve, the device starts the pump as soon as a tap is opened, and...
Variateur de vitesse pompe (tri/tri) SPEEDMATIC MASTER Variateur de vitesse pompe (tri/tri) SPEEDMATIC MASTER 2
5 to 8 days
Variable speed drives
Pump speed controller (three-phase/three-phase) SPEEDMATIC MASTER
$873.35

$873.35 tax excl.

Delivery 5 to 8 days

MASTER frequency drive, to be connected on the delivery of a three-phase 400 volt pump, it varies the speed, it provides control and protection against overcurrents and dry running. Easy to configure, simply set the target pressure on the digital screen, individual installation, or by 2, 3 or 4 pumps.
Variateur de vitesse pompe (mono/mono - mono/tri 230v) SPEEDMATIC MASTER Variateur de vitesse pompe (mono/mono - mono/tri 230v) SPEEDMATIC MASTER 2
5 to 8 days
Variable speed drives
Pump variable speed drive (single-phase 230V / three-phase 230V) SPEEDMATIC MASTER
009170
$849.14

$849.14 tax excl.

Delivery 5 to 8 days

MASTER 101110 frequency drive, to be connected on the delivery of a single-phase 230 volt or three-phase 230 volt pump, it varies the speed, it provides control and protection against overcurrents and dry running. Easy to configure on the digital screen, individual installation for 1 pump, or for 2, 3 or 4 pumps.
Protection et sécurité manque d'eau pour pompe de surface - SAFEMATIC Protection et sécurité manque d'eau pour pompe de surface - SAFEMATIC 2
2 to 3 days
Pump automation
SAFEMATIC single-phase pump dry-run protection box
$119.18

$119.18 tax excl.

Delivery 2 to 3 days

The SAFEMATIC stops the pump when lack of water is detected at the suction, it protects against overcurrents, RESET button, POWER, ALARM and ON LEDs. Installation on power socket, (S model), or wall mounting, (W model).
Variateur de vitesse pompe monophasé 230 V SPEEDMATIC EASY Variateur de vitesse pompe monophasé 230 V SPEEDMATIC EASY 2
Variable speed drives
Single-phase 230 V pump speed controller SPEEDMATIC EASY
Frequency drive for single-phase 230 V pump, to be connected on the pump delivery, it varies the motor speed according to use, while maintaining constant pressure, it provides control and protection of a pump against overcurrents and dry running. Easy to configure, simply set the target pressure on the digital screen.
View
Variateur de vitesse pompe monophasé 230 V SPEEDBOX Variateur de vitesse pompe monophasé 230 V SPEEDBOX 2
2 to 3 days
Variable speed drives
Single-phase 230V pump variable speed drive SPEEDBOX
009165
$919.91

$919.91 tax excl.

Delivery 2 to 3 days

SPEEDBOX frequency drive, for single-phase 230 volt pump, wall-mounted installation, varies the motor speed according to use, while maintaining constant pressure, it provides control and protection of a pump against overcurrents and dry running. It can be installed individually or in a group of 2 pumps. 0-10 bar pressure sensor (supplied).
Kit gestionnaire pompe monophasé avec réservoir Kit gestionnaire pompe monophasé avec réservoir 2
2 to 3 days
Pump automation
Single-phase pump manager kit with tank
$230.91

$230.91 tax excl.

Delivery 2 to 3 days

Single-phase surface or submersible pump outlet kit, including an Optimatic RM manager, with built-in flow rate and pressure sensor, a 3 or 8 litre Flowvarem in-line tank, a stainless steel valve and fittings set, power supply and connection electric cable.
Vanne à boisseau électrique inox
2 to 4 days
Solenoid valve
Stainless steel electric ball valve
$180.63

$180.63 tax excl.

Delivery 2 to 4 days

The electric valve is designed for automatic isolation of water pipes, full bore, normally closed at rest, ideal for drinking water networks, rainwater, water treatment, HVAC, industry... 2-wire power supply, voltage 230 VAC, diameter 3/4" and 1".
Pressostat électronique avec manomètre digital - Switchmatic Pressostat électronique avec manomètre digital - Switchmatic 2
1 to 3 days
Pressure switch
Switchmatic 2 digital electronic pressure switch
001032
$100.56

$100.56 tax excl.

Delivery 1 to 3 days

Electronic pressure switch with digital display, manages the starting and stopping of a single-phase pump up to 1.50 Kw, pressure reading on the display, easily adjustable pressures, connection identical to a pressure switch, protection against overcurrents and dry running.
Showing 1-24 of 29 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

The electrical equipment for your pumps

Control panels, variable speed drives, pressure switches, motor protection, floats and level detectors, capacitors, cables and solenoid valves: everything that controls and protects a pump.

Selection criteria

  • Power supply: single-phase 230 V or three-phase 400 V.
  • Power or current of the motor, shown on its rating plate.
  • Function: starting, protection, pressure control or level control.

Frequently asked questions: Electrical accessories

How do I choose a control panel?

Choose it according to the power supply (single-phase or three-phase), the power or current of the motor and the number of pumps to control. Panels for two pumps alternate their operation.

What is a pressure switch used for?

It starts and stops the pump according to the pressure of the network: it opens at high pressure and closes at low pressure. Its thresholds are set according to your installation.

Variable speed drive: what is the benefit?

It adjusts the motor speed to the demand: steady pressure, fewer starts, soft start and controlled energy use. Check that it matches the voltage and the power of your motor.

Float or level probe?

A float is simple and cheap for starting and stopping a lift pump. A probe or level controller allows finer settings and protects against dry running.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.