Electrics accessories

Essential electrical accessories for connecting pump installations, pumping stations, lifting stations...

Variable speed drives
Water pump control panel
Pressure switch
Pump automation
Float switch - Regulator of level
Motor protection circuit breaker
Cable
Coupling
Level regulator
Pressure control
Condensator
Solenoid valve
Coffret alarme niveau haut Coffret alarme niveau haut 2
2 to 4 days
Water pump control panel
Alarm panel with battery backup - ALARME-TOP
007098
$197.39

$197.39 tax excl.

Delivery 2 to 4 days

High level detection panel for tank, lifting station, with power-on and alarm indicator lights, detection by a level float, 230 volt supply, 9V rechargeable battery, 90 dB buzzer, rotating beacon, test button, reset, alarm output contact, with mains power cable.
Interrupteur à flotteur ATEX Interrupteur à flotteur ATEX 2
2 to 4 days
Float switch - Regulator of level
ATEX float switch SUPERTEC EX
001411
$145.25

$145.25 tax excl.

Delivery 2 to 4 days

ATEX float switch, versatile for clean liquids, waste water and industrial water, switching angle +/- 45°, ATEX II 1G Ex ia IIC T6 compliant, double-layer float, pressure resistant.
Kit d'automatisme pour réservoir à vessie - E/S 1" Kit d'automatisme pour réservoir à vessie - E/S 1" 2
Last items in stock
Pressure switch
Automatic functioning set for surface pump 230V
$132.21

$132.21 tax excl.

Last items in stock

This automatic kit in single-phase, is designed to connect and to do automatic functioning of surface pump, and bladder tank too (on-line, spherical or horizontal). The contactor permit to connect a surface pump single-phase.
Alimentation de secours CombiMaster 12/2000-60
3 to 5 days
Water pump control panel
CombiMaster 2000VA 230V emergency power supply
$3,379.81

$3,379.81 tax excl.

Delivery 3 to 5 days

Backup power supply for single-phase lift pump, up to 1.50 kw, automatic switching in the event of mains failure, the battery takes over, the converter provides an output voltage of 230V. Backup power supply for single-phase lift pumps, CombiMaster 12/2000-60 and CombiMaster 24/2000-60, battery cut-off, battery cables, AGM 12/160 Ah and 320 Ah battery.
Boitier de commande et protection pompe de relevage monophasé
Motor protection circuit breaker
Control and protection box for single-phase lift pump
To automate a single-phase lift pump, AT-120 float switch for agitated, clear, waste and loaded water, Schneider box with on/off button, thermal reset, power contactor + thermal protection relay, control by float switch in the tank.
View
Boitier de commande et protection pompe de relevage triphasé
2 to 4 days
Motor protection circuit breaker
Control and protection box for three-phase lift pump
$312.84

$312.84 tax excl.

Delivery 2 to 4 days

Control and protection box for a three-phase lift pump from 0.55 Kw to 11.00 Kw, AT-120 float switch for agitated, clear, waste and loaded water, Schneider box with on/off button, thermal reset, power contactor + thermal protection relay, control by float switch in the tank.
Interrupteur de niveau à flotteur BIP STOP Interrupteur de niveau à flotteur BIP STOP 2
2 to 3 days
Float switch - Regulator of level
FLO STOP float level switch for small pumps
$33.52

$33.52 tax excl.

Delivery 2 to 3 days

FLO STOP Float level switch for small pumps for application with slightly aggressive liquids, and highly appreciated in agitated liquids - Switching angle + or - 110º - Maximum pressure : 3,5 bars.
Float switch + 2P remote-control connection plug
2 to 4 days
Float switch - Regulator of level
Float switch + 2P remote-control connection plug
$74.49

$74.49 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Float switch + 2P remote-control connection plug
2 to 4 days
Recovery of rainwater
Float switch + 2P remote-control connection plug
$79.14

$79.14 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Float switch + 2P remote-control connection plug
2 to 4 days
Float switch - Regulator of level
Float switch + 2P remote-control connection plug
$74.49

$74.49 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Float switch + 2P remote-control connection plug
2 to 4 days
Float switch - Regulator of level
Float switch + 2P remote-control connection plug
$79.14

$79.14 tax excl.

Delivery 2 to 4 days

Float switch with 16A 250V 2P+e, automatic control of the pump according to the level. The power plug pump is connect on Schuko plug. Available with cable from 5 to 20m.
Détecteur de niveau ras du sol - CRAB Détecteur de niveau ras du sol - CRAB 2
2 to 4 days
Float switch - Regulator of level
Floor water detector
001412
$202.98

$202.98 tax excl.

Delivery 2 to 4 days

Placed on a flat surface, the CRAB detector can detect the presence of water on the floor from 3 mm, thanks to two low probes, suitable for single-phase lift pumps without float, low suction, supplied with 10 metre cable + remote control plug.
Interrupteur à flotteur universel FOX - G09
2 to 3 days
Float switch - Regulator of level
FOX - G09 universal float switch
001419
$67.97

$67.97 tax excl.

Delivery 2 to 3 days

The FOX - G09 float switch allows direct control of a single-phase lift pump up to 2.20 Kw, used for clear and waste water, activation angle 45°, max liquid temperature 70°C.
Connecteur étanche démontable IP68 Connecteur étanche démontable IP68 2
2 to 3 days
Coupling
IP68 demountable watertight connector
$19.83

$19.83 tax excl.

Delivery 2 to 3 days

It allows safe connection between two electrical cables, 3 or 4 wires, IP68, replacing heat-shrink sleeves or watertight joints. For electrical cables from 0.5 to 1.5 mm².
Contacteur manométrique PM/5 - PM/12 Contacteur manométrique PM/5 - PM/12 2
2 to 3 days
Pressure switch
Pressure switch PM/5 - PM/12
$34.26

$34.26 tax excl.

Delivery 2 to 3 days

Pressure switch for water networks, single-pole or two-pole connection (230 volts), two pressure switch models, 1 to 5 bar (PM/5) and 3 to 12 bar (PM/12). 1/4" female threaded connection.
Contacteur manométrique avec manomètre PM5
2 to 4 days
Pressure switch
Pressure switch with pressure gauge PM5
001214
$44.69

$44.69 tax excl.

Delivery 2 to 4 days

0-6 bar pressure switch with pressure gauge and built-in fittings for screwing directly onto pump and tank. Factory setting 1.5 to 2.8 bar, food grade quality.
Régulateur électronique débit et pression pompe monophasé – BRIO 200M
2 to 3 days
Pump automation
Single-phase pump electronic manager (BRIO 2000M)
009136
$108.01

$108.01 tax excl.

Delivery 2 to 3 days

Replaces the tank and the pressure switch. The BRIO 2000M automatically controls the start and stop of a single-phase pump up to 1.50 Kw and protects it against dry running.
Kit gestionnaire pompe monophasé avec réservoir Kit gestionnaire pompe monophasé avec réservoir 2
2 to 3 days
Pump automation
Single-phase pump manager kit with tank
$230.91

$230.91 tax excl.

Delivery 2 to 3 days

Single-phase surface or submersible pump outlet kit, including an Optimatic RM manager, with built-in flow rate and pressure sensor, a 3 or 8 litre Flowvarem in-line tank, a stainless steel valve and fittings set, power supply and connection electric cable.
Vanne à boisseau électrique inox
2 to 4 days
Solenoid valve
Stainless steel electric ball valve
$180.63

$180.63 tax excl.

Delivery 2 to 4 days

The electric valve is designed for automatic isolation of water pipes, full bore, normally closed at rest, ideal for drinking water networks, rainwater, water treatment, HVAC, industry... 2-wire power supply, voltage 230 VAC, diameter 3/4" and 1".
Interrupteur à flotteur eau potable " ACS " Interrupteur à flotteur eau potable " ACS " 2
2 to 3 days
Float switch - Regulator of level
Supertec ACS float switch for drinking water
001407
$107.07

$107.07 tax excl.

Delivery 2 to 3 days

Round polypropylene body, AD8 3X1 cable, ACS approved, switching angle 45°, 8A max for one motor, 220-240 volts, 10 metre cable.
Alarme cuve trop plein avec réserve de marche - ALARM-TOP-FLOT Alarme cuve trop plein avec réserve de marche - ALARM-TOP-FLOT 2
2 to 3 days
Water pump control panel
Tank overflow alarm with battery backup - ALARME-TOP-FLOT
$233.70

$233.70 tax excl.

Delivery 2 to 3 days

High level detection panel for tank, lifting station, with power-on and alarm indicator lights, detection by a level float, 230 volt supply, 12V rechargeable battery, 90 dB buzzer, rotating beacon, alarm reset, alarm output contact, supplied with float switch and mains power cable.
Interrupteur à flotteur eaux chargées - vannes TAURUS
2 to 3 days
Float switch - Regulator of level
TAURUS level regulator for loaded water and sewage
001335
$100.56

$100.56 tax excl.

Delivery 2 to 3 days

Level regulator with triple watertight chamber, with built-in ballast, for waste water, loaded water, industrial water and lifting stations, switching angle of 20°, (very precise level detection). Available with 10 metre electric cable.
Contacteur manométrique PT/5 - PT/12
2 to 3 days
Pressure switch
Three-phase pressure switch PT/5 - PT/12
$35.38

$35.38 tax excl.

Delivery 2 to 3 days

Pressure switch for water network, three-pole connection (three-phase), two pressure switch models, 1 to 5 bar (PT/5) and 3 to 12 bar (PT/12). 1/4" female threaded connection.
Showing 1-24 of 26 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

The electrical equipment for your pumps

Control panels, variable speed drives, pressure switches, motor protection, floats and level detectors, capacitors, cables and solenoid valves: everything that controls and protects a pump.

Selection criteria

  • Power supply: single-phase 230 V or three-phase 400 V.
  • Power or current of the motor, shown on its rating plate.
  • Function: starting, protection, pressure control or level control.

Frequently asked questions: Electrical accessories

How do I choose a control panel?

Choose it according to the power supply (single-phase or three-phase), the power or current of the motor and the number of pumps to control. Panels for two pumps alternate their operation.

What is a pressure switch used for?

It starts and stops the pump according to the pressure of the network: it opens at high pressure and closes at low pressure. Its thresholds are set according to your installation.

Variable speed drive: what is the benefit?

It adjusts the motor speed to the demand: steady pressure, fewer starts, soft start and controlled energy use. Check that it matches the voltage and the power of your motor.

Float or level probe?

A float is simple and cheap for starting and stopping a lift pump. A probe or level controller allows finer settings and protects against dry running.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.