Electrics accessories

Essential electrical accessories for connecting pump installations, pumping stations, lifting stations...

Variable speed drives
Water pump control panel
Pressure switch
Pump automation
Float switch - Regulator of level
Motor protection circuit breaker
Cable
Coupling
Level regulator
Pressure control
Condensator
Solenoid valve
Interrupteur à flotteur pour liquides agités AT 120
2 to 4 days
Float switch - Regulator of level
AT 120 float switch for agitated liquids
001418
$113.59

$113.59 tax excl.

Delivery 2 to 4 days

For use with agitated, clear, waste and loaded water, this float level switch (On/Off) allows direct automation of pumps (up to 1.5 HP) or unlimited via a contactor. Differential angle of 120°, which allows a smooth contact to be established, and allows both the high level and the low level to be detected in the same tank.
Interrupteur de niveau Eau potable
2 to 4 days
Float switch - Regulator of level
ATS 165 EP - ACS certified float level switch
$201.11

$201.11 tax excl.

Delivery 2 to 4 days

ATS 165 EP, ACS certified float level switch use in extremely agitated drinking water applications. Switching angle : + or - 165°. Maximum pressure : 3,5 bars
Gestionnaire électronique de contrôle et protection pompe mono (OPTIMATIC) Gestionnaire électronique de contrôle et protection pompe mono (OPTIMATIC) 2
2 to 3 days
Pump automation
Electronic pump controller COELBO OPTIMATIC
009174
$102.42

$102.42 tax excl.

Delivery 2 to 3 days

Compact device for the control and protection of a single-phase surface or submersible pump, patented operation, fitted with an electronic flow and pressure sensor, lack-of-water safety at the suction, the optimatic replaces the pressure switch, the bladder pressure tank and the check valve, the device starts the pump as soon as a tap is opened, and stops...
Contacteur manométrique PM/5 - PM/12 Contacteur manométrique PM/5 - PM/12 2
2 to 3 days
Pressure switch
Pressure switch PM/5 - PM/12
$34.26

$34.26 tax excl.

Delivery 2 to 3 days

Pressure switch for water networks, single-pole or two-pole connection (230 volts), two pressure switch models, 1 to 5 bar (PM/5) and 3 to 12 bar (PM/12). 1/4" female threaded connection.
OPTIPLUS dispositif automatique pour le contrôle intégral des pompes
2 to 4 days
Pump automation
Pump control and protection manager single-phase 1"1/4
009200
$137.80

$137.80 tax excl.

Delivery 2 to 4 days

Compact device for the control and protection of a single-phase surface or submersible pump of 2.20 kW max, patented operation, fitted with an electronic flow and pressure sensor, water shortage safety on suction, the optimatic replaces the pressure switch, the bladder tank and the check valve, the device starts the pump as soon as a tap is opened, and...
Variateur de vitesse pompe (tri/tri) SPEEDMATIC MASTER Variateur de vitesse pompe (tri/tri) SPEEDMATIC MASTER 2
5 to 8 days
Variable speed drives
Pump speed controller (three-phase/three-phase) SPEEDMATIC MASTER
$873.35

$873.35 tax excl.

Delivery 5 to 8 days

MASTER frequency drive, to be connected on the delivery of a three-phase 400 volt pump, it varies the speed, it provides control and protection against overcurrents and dry running. Easy to configure, simply set the target pressure on the digital screen, individual installation, or by 2, 3 or 4 pumps.
Variateur de vitesse pompe (mono/mono - mono/tri 230v) SPEEDMATIC MASTER Variateur de vitesse pompe (mono/mono - mono/tri 230v) SPEEDMATIC MASTER 2
5 to 8 days
Variable speed drives
Pump variable speed drive (single-phase 230V / three-phase 230V) SPEEDMATIC MASTER
009170
$849.14

$849.14 tax excl.

Delivery 5 to 8 days

MASTER 101110 frequency drive, to be connected on the delivery of a single-phase 230 volt or three-phase 230 volt pump, it varies the speed, it provides control and protection against overcurrents and dry running. Easy to configure on the digital screen, individual installation for 1 pump, or for 2, 3 or 4 pumps.
Protection et sécurité manque d'eau pour pompe de surface - SAFEMATIC Protection et sécurité manque d'eau pour pompe de surface - SAFEMATIC 2
2 to 3 days
Pump automation
SAFEMATIC single-phase pump dry-run protection box
$119.18

$119.18 tax excl.

Delivery 2 to 3 days

The SAFEMATIC stops the pump when lack of water is detected at the suction, it protects against overcurrents, RESET button, POWER, ALARM and ON LEDs. Installation on power socket, (S model), or wall mounting, (W model).
Variateur de vitesse pompe monophasé 230 V SPEEDMATIC EASY Variateur de vitesse pompe monophasé 230 V SPEEDMATIC EASY 2
Variable speed drives
Single-phase 230 V pump speed controller SPEEDMATIC EASY
Frequency drive for single-phase 230 V pump, to be connected on the pump delivery, it varies the motor speed according to use, while maintaining constant pressure, it provides control and protection of a pump against overcurrents and dry running. Easy to configure, simply set the target pressure on the digital screen.
View
Variateur de vitesse pompe monophasé 230 V SPEEDBOX Variateur de vitesse pompe monophasé 230 V SPEEDBOX 2
2 to 3 days
Variable speed drives
Single-phase 230V pump variable speed drive SPEEDBOX
009165
$919.91

$919.91 tax excl.

Delivery 2 to 3 days

SPEEDBOX frequency drive, for single-phase 230 volt pump, wall-mounted installation, varies the motor speed according to use, while maintaining constant pressure, it provides control and protection of a pump against overcurrents and dry running. It can be installed individually or in a group of 2 pumps. 0-10 bar pressure sensor (supplied).
Régulateur électronique débit et pression pompe monophasé – BRIO 200M
2 to 3 days
Pump automation
Single-phase pump electronic manager (BRIO 2000M)
009136
$108.01

$108.01 tax excl.

Delivery 2 to 3 days

Replaces the tank and the pressure switch. The BRIO 2000M automatically controls the start and stop of a single-phase pump up to 1.50 Kw and protects it against dry running.
SOBA EX certifié ATEX SOBA EX certifié ATEX 2
2 to 3 days
Float switch - Regulator of level
SOBA EX, ATEX certified level regulator for gas and dust environments
001381
$275.60

$275.60 tax excl.

Delivery 2 to 3 days

SOBA EX, ATEX certified level regulator for gas and dust environments, with external ballast. Applications : sewage water, charged liquids, oils, mud, paint, aggressive liquids...  - Maximum pressure : 4 bars - Switching angle + or - 25°.
Régulateur de niveau à flotteur pour acide, base, produits pétroliers - SOBA HR HY
2 to 3 days
Float switch - Regulator of level
SOBA HR HY regulator of level for aggressive liquids - 3.5 bars
001402
$256.05

$256.05 tax excl.

Delivery 2 to 3 days

SOBA HR HY omnidirectional regulator of level with double waterproof thanks encased in a HR HY (High Resistance) housing. Used for aggressive liquid : acids, solvents, corrosive liquids, hydrocarbons, sea water, etc. Allowed fluid density from 0,80 to 1,10. Maximum pressure : 3.5 bars. Switching angle + or - 25°.
Détecteur de niveau pour silo à grains Détecteur de niveau pour silo à grains 2
2 to 3 days
Float switch - Regulator of level
SOLIBA level detector for grain silo
001416
$168.53

$168.53 tax excl.

Delivery 2 to 3 days

For stopping the filling of storage areas or silos, operation by tilting +/- 10°, when the high level is reached during filling, the SOLIBA detector tilts and stops the filling. Cable length 10 metres.
Pressostat électronique avec manomètre digital - Switchmatic Pressostat électronique avec manomètre digital - Switchmatic 2
1 to 3 days
Pressure switch
Switchmatic 2 digital electronic pressure switch
001032
$100.56

$100.56 tax excl.

Delivery 1 to 3 days

Electronic pressure switch with digital display, manages the starting and stopping of a single-phase pump up to 1.50 Kw, pressure reading on the display, easily adjustable pressures, connection identical to a pressure switch, protection against overcurrents and dry running.
Variateur de vitesse pompe triphasé 230 V SPEEDBOX Variateur de vitesse pompe triphasé 230 V SPEEDBOX 2
2 to 3 days
Variable speed drives
Three-phase 230V pump variable speed drive SPEEDBOX
009167
$942.25

$942.25 tax excl.

Delivery 2 to 3 days

Frequency drive for three-phase 230 V pump, wall-mounted installation, it varies the motor speed according to use, while maintaining constant pressure, it provides control and protection of a pump against overcurrents and dry running. It can be installed individually or in a group of two pumps. 0-10 bar pressure sensor (supplied).
Variateur de vitesse pompe triphasé 400 V SPEEDBOX Variateur de vitesse pompe triphasé 400 V SPEEDBOX 2
2 to 3 days
Variable speed drives
Three-phase 400V pump variable speed drive SPEEDBOX
$1,002.77

$1,002.77 tax excl.

Delivery 2 to 3 days

SPEEDBOX frequency drive, for three-phase 400 V pump, wall-mounted installation, varies the motor speed according to use, while maintaining constant pressure, it provides control and protection of a pump against overcurrents and dry running. It can be installed individually or in a group of 2 pumps. 0-10 bar pressure sensor (supplied).
Contacteur manométrique PT/5 - PT/12
2 to 3 days
Pressure switch
Three-phase pressure switch PT/5 - PT/12
$35.38

$35.38 tax excl.

Delivery 2 to 3 days

Pressure switch for water network, three-pole connection (three-phase), two pressure switch models, 1 to 5 bar (PT/5) and 3 to 12 bar (PT/12). 1/4" female threaded connection.
Showing 1-22 of 22 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

The electrical equipment for your pumps

Control panels, variable speed drives, pressure switches, motor protection, floats and level detectors, capacitors, cables and solenoid valves: everything that controls and protects a pump.

Selection criteria

  • Power supply: single-phase 230 V or three-phase 400 V.
  • Power or current of the motor, shown on its rating plate.
  • Function: starting, protection, pressure control or level control.

Frequently asked questions: Electrical accessories

How do I choose a control panel?

Choose it according to the power supply (single-phase or three-phase), the power or current of the motor and the number of pumps to control. Panels for two pumps alternate their operation.

What is a pressure switch used for?

It starts and stops the pump according to the pressure of the network: it opens at high pressure and closes at low pressure. Its thresholds are set according to your installation.

Variable speed drive: what is the benefit?

It adjusts the motor speed to the demand: steady pressure, fewer starts, soft start and controlled energy use. Check that it matches the voltage and the power of your motor.

Float or level probe?

A float is simple and cheap for starting and stopping a lift pump. A probe or level controller allows finer settings and protects against dry running.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.