Booster

Wide choice of booster sets, for supply networks in housing, apartment buildings and industry, fire-fighting booster sets for RIA/PIA networks, 12/24V low-voltage booster sets for remote sites or sites not connected to the mains, variable speed booster sets with 1 or 2 pumps.

Variable speed 1 pump
Fixed speed 1 pump
12V-24V clear water pump
Variable speed 2 or 3 pumps
Fixed speed 2 pumps
Fire-fighting systems
Active filters
Groupe surpresseur 100 L avec pompe multicellulaire auto-amorçante 0 à 6 m3/h Groupe surpresseur 100 L avec pompe multicellulaire auto-amorçante 0 à 6 m3/h 2
3 to 5 days
Fixed speed 1 pump
100L booster set flow rate 0 to 6 m3/h
£1,109.33

£1,109.33 tax excl.

Delivery 3 to 5 days

100L booster set, with single-phase or three-phase self-priming multistage pump, very quiet, digital electronic pressure switch, with water shortage safety on suction, power 1.10 kW, fully equipped, with stainless steel fittings.
Surpresseur horizontal 24L avec pompe auto-amorçante Surpresseur horizontal 24L avec pompe auto-amorçante 2
3 to 5 days
Fixed speed 1 pump
20L horizontal booster set with self-priming pump
600690
£648.85

£648.85 tax excl.

Delivery 3 to 5 days

Single-phase booster set, with 304 stainless steel single-stage self-priming pump, power 0.55 kW, 20L diaphragm tank, max flow rate 40 l/min.
Bâche de disconnexion 500L équipée pompe UP6E 12/24V Bâche de disconnexion 500L équipée pompe UP6E 12/24V 2
5 to 8 days
Cistern - tank
500L disconnection tank fitted with UP6E 12-24V pump
501048
£1,437.24

£1,437.24 tax excl.

Delivery 5 to 8 days

500L polyethylene tank, with a compartment for housing the pump, storage of mains water and spring water. With an automatic mains water/spring water filling tap, drain valve, overflow, vent, UP6E 12/24V pump, delivering a pressure of 2.5 bar and a flow rate of 26 l/min, 316 stainless steel outlet piping, diameter 1/2".
Groupe surpresseur 60 L avec pompe multicellulaire Multinox Groupe surpresseur 60 L avec pompe multicellulaire Multinox 2
3 to 5 days
Fixed speed 1 pump
60 L booster set with self-priming multistage pump 0 to 3.5 m3/h
600610
£886.07

£886.07 tax excl.

Delivery 3 to 5 days

60 litre diaphragm booster set, with Multinox multistage pump, power 0.60 or 0.75 Kw, nominal flow rate up to 3.5 m3/h, 316 stainless steel fittings assembly, including valve, check valve, assembly delivered, assembled, wired and tested by us.
Surpresseur à vitesse variable SPEEDBOARD 0 à 9 m3/h Surpresseur à vitesse variable SPEEDBOARD 0 à 9 m3/h 2
1 to 2 weeks
Variable speed 1 pump
9 SHI three-phase multistage variable speed booster set
600689
£3,397.75

£3,397.75 tax excl.

Delivery 1 to 2 weeks

All stainless steel variable-speed booster set, max flow rate 14 m3/h, all 304 stainless steel multistage centrifugal pump, mounted on stainless steel chassis, with speed controller built into the motor, variable speed, according to flow rate, dry-run protection, soft start and stop.
Surpresseur automatique multicellaire inox - ESAM9 Surpresseur automatique multicellaire inox - ESAM9 2
3 to 5 days
Fixed speed 1 pump
Automatic all stainless steel booster set on frame 9 m3/h
600715
£1,855.85

£1,855.85 tax excl.

Delivery 3 to 5 days

Booster set assembled with a self-priming multi-stage pump entirely in 304 stainless steel, power 2.2 Kw, OPTIMATIC automatic manager, control and protection for single-phase pump, suitable for water networks in housing, garden, watering, washing and fire safety. Nominal flow rate 9.0 m3/h, pressure 6 BAR.
Surpresseur pompe multicellualire Multinox 100 automatique
3 to 5 days
Fixed speed 1 pump
EHX SP all stainless steel booster set on frame 3 and 5 m3/h
600608
£927.93

£927.93 tax excl.

Delivery 3 to 5 days

Booster set assembled with self-priming multistage pump all 304 stainless steel, power 0.75 Kw or 1.10 Kw, OPTIMATIC automatic controller, control and protection for a single-phase pump, suitable for water networks in the home, garden, watering, washing. Nominal flow rate 3 or 5 m3/h.
POMPES H2O JARDINOX M55/75 pressure boosting unit in stainless steel 50L 230V POMPES H2O JARDINOX M55/75 pressure boosting unit in stainless steel 50L 230V 2
4 to 6 days
Fixed speed 1 pump
JARDINOX 50L stainless steel water booster set
600242
£886.07

£886.07 tax excl.

Delivery 4 to 6 days

50L stainless steel booster set, with 0.55kw single-phase stainless steel JET pump, 50L 304 stainless steel bladder pressure tank, all-316 stainless steel accessories. Food quality. Delivered assembled and wired.
POMPES H2O NOMADE booster pump unit 20L 12V or 24V POMPES H2O NOMADE booster pump unit 20L 12V or 24V 2
4 to 6 days
12V-24V clear water pump
NOMADE 20 L 12V-24V booster set
£962.81

£962.81 tax excl.

Delivery 4 to 6 days

Water supply unit in pressure with stainless steel 20L tank. JET pump 0.50kw, 12V ou 24V. Flow : 60l/min. Maxi. pressure : 2.5 bar.
POMPES H2O PRESS-CC booster pump unit 24L 12V POMPES H2O PRESS-CC booster pump unit 24L 12V 2
4 to 6 days
12V-24V pump
PRESS CC 20L 12V-24V booster set
£934.90

£934.90 tax excl.

Delivery 4 to 6 days

Booster group with 20L bladder tank, equiped with 12V pump in direct current (DC), for automatic distribution of water in pressure. Maxi pressure to 3.2 bar. Delivered complete.
POMPES H2O PRESSINOX CC booster pump 60L unit 12V or 24V POMPES H2O PRESSINOX CC booster pump 60L unit 12V or 24V 2
4 to 6 weeks
12V-24V pump
PRESSINOX 100 L 24V booster set
605640
£1,660.50

£1,660.50 tax excl.

Delivery 4 to 6 weeks

Water supply system in water pressure with 60L tank in stainless steel, equiped with JET pump, power : 0.50kw, 24V. Flow rate : 40l/min. Maxi. pressure : 3.0 bar.
POMPES H2O PRESSINOX CC booster pump 50L unit 12V or 24V
6 to 10 days
12V-24V clear water pump
PRESSINOX 50 L 12-24V booster set
£1,123.28

£1,123.28 tax excl.

Delivery 6 to 10 days

Water supply system in water pressure with 50 L tank in stainless steel, equiped with JET pump, power : 0.50kw 12V or 24V. Flow rate : 40l/min. Maxi. pressure : 3.6 bar.
Surpresseur 2 pompes à vitesse variable EHX5 MONO - 0 à 14 m3/h Surpresseur 2 pompes à vitesse variable EHX5 MONO - 0 à 14 m3/h 2
Variable speed 2 or 3 pumps
S2 HI 2-pump variable speed booster set - 0 to 14 m3/h
600271
£4,793.12

£4,793.12 tax excl.

Variable speed booster set with two multistage pumps entirely in 304 stainless steel, power 1.10 kw each, available in single-phase and three-phase, max flow rate 14 m3/h, max pressure 4.5 bar, supplied with a 24Ll diaphragm tank, all fittings, valves and check valves are in stainless steel, including the frame, supplied assembled, wired and tested.
Surpresseur à vitesse variable 2 pompes EHX9 - 0 à 28 m3/h Surpresseur à vitesse variable 2 pompes EHX9 - 0 à 28 m3/h 2
Variable speed 2 or 3 pumps
S2 HI 2-pump variable speed booster set - 0 to 28 m3/h
600720
£5,414.07

£5,414.07 tax excl.

Variable speed booster set with two multistage pumps entirely in 304 stainless steel, power 2.20 kw each, three-phase 400V supply voltage, max flow rate 28 m3/h, max pressure 6.0 bar, supplied with a 200L vertical diaphragm tank, all fittings, valves and check valves are in stainless steel, including the frame, supplied assembled, wired and tested.
Surpresseur à vitesse variable avec pompe EHX - VV Surpresseur à vitesse variable avec pompe EHX - VV 2
4 to 6 days
Horizontal multistage pump
Single-phase variable speed multistage pump
£1,020.02

£1,020.02 tax excl.

Delivery 4 to 6 days

All stainless steel variable speed booster set, nominal flow rate 3, 5 or 9 m3/h, multistage centrifugal pump with speed controller integrated in the motor and pressure sensor supplied with wires. Constant pressure, soft start and stop, variable speed according to flow rate, dry running protection.
Groupe surpresseur à vitesse variable AD-PRESS Groupe surpresseur à vitesse variable AD-PRESS 2
3 to 5 days
Variable speed 1 pump
SPEEDBOARD H multistage variable speed booster set
£1,227.93

£1,227.93 tax excl.

Delivery 3 to 5 days

Variable speed booster set, with self-priming multistage pump made entirely of 304 stainless steel, very quiet, single-phase power supply, high efficiency, flow rate 0 to 3 m3/h and 0 to 5 m3/h, fitted with a variable speed drive, allowing a variable flow rate according to use, and constant pressure. 20 and 100 L booster tank, fittings, valve, check valve...
Surpresseur à vitesse variable SPEEDBOARD 110 inox Surpresseur à vitesse variable SPEEDBOARD 110 inox 2
2 to 4 days
Variable speed 1 pump
SPEEDBOARD HI multistage variable-speed booster set
£1,276.77

£1,276.77 tax excl.

Delivery 2 to 4 days

All 304 stainless steel booster set, with built-in speed controller, compact assembly, with check valve, fittings and 316 stainless steel valve, IE3 high-efficiency motor, all 304 stainless steel multistage self-priming pump, very quiet, 230 volt single-phase supply, flow rate 0 to 3 m3/h and 0 to 5 m3/h.
Groupe surpresseur vitesse variable 0 à 6 m3/h Groupe surpresseur vitesse variable 0 à 6 m3/h 2
5 to 8 days
Variable speed 1 pump
SPEEDBOARD SBIX 3 multistage variable speed booster set
£2,055.39

£2,055.39 tax excl.

Delivery 5 to 8 days

All stainless steel variable-speed booster set, max flow rate 4.8 m3/h, nominal flow rate 3.5 m3/h, self-priming centrifugal pump mounted on stainless steel chassis, speed controller built into the motor, soft start and stop, variable speed, according to flow rate, dry-run protection.
Surpresseur à vitesse variable 0 à 5 m3/h Surpresseur à vitesse variable 0 à 5 m3/h 2
5 to 8 days
Variable speed 1 pump
SPEEDBOARD SBIX 5 multistage variable speed booster set
£2,189.35

£2,189.35 tax excl.

Delivery 5 to 8 days

All stainless steel variable-speed booster set, max flow rate 0 to 7 m3/h, self-priming centrifugal pump mounted on stainless steel chassis, speed controller built into the motor, soft start and stop, variable speed, according to flow rate, dry-run protection.
Surpresseur à vitesse variable SP - 0 à 4.8 m3/h Surpresseur à vitesse variable SP - 0 à 4.8 m3/h 2
4 to 6 days
Variable speed 1 pump
SPEEDBOARD V24 multistage variable speed booster set
£1,339.56

£1,339.56 tax excl.

Delivery 4 to 6 days

All stainless steel variable speed booster set, nominal flow rate 3.0 or 5.0 m3/h, self-priming centrifugal pump with speed controller integrated in the motor, constant pressure, soft start and stop, variable speed according to flow rate, dry running protection.
Surpresseur à vitesse variable SPEEDMATIC EASY
2 to 4 days
Variable speed 1 pump
SPEEDMATIC EASY multistage variable speed booster set
£949.55

£949.55 tax excl.

Delivery 2 to 4 days

Variable speed booster set, with all 304 stainless steel multistage pump, very quiet, single-phase power supply, speed controller mounted on the pump discharge, allowing the motor speed to vary according to use while maintaining constant pressure, it provides control and protection of the pump against overcurrent and dry running.
Groupe surpresseur eau 12-24V à vitesse variable UP12/E-35L Groupe surpresseur eau 12-24V à vitesse variable UP12/E-35L 2
5 to 8 days
12V-24V clear water pump
UP12/E-60L 12-24V variable speed water booster set
£1,067.46

£1,067.46 tax excl.

Delivery 5 to 8 days

24V self-priming booster set with variable speed, 60L booster tank, variable flow rate from 0 to 36 l/min, constant pressure, PTFE gear pump, integrated check valve, max pressure 3.5 bar (24 Vdc models), pressure 2.5 bar (12/24 Vdc model).
Kit surpresseur vitesse variable pour réservoir eau de pluie MXS-EMT
1 to 2 weeks
Recovery of rainwater
Variable speed booster set kit for rainwater tank MXS EMT
£2,965.18

£2,965.18 tax excl.

Delivery 1 to 2 weeks

All 304 stainless steel multistage submersible pump, with support allowing the pump to be positioned vertically at the bottom of the tank, floating suction to limit impurities and loaded water at the bottom of the tank. Complete installation, supplied with speed controller, diaphragm tank, set of threaded fittings, valve, 316 stainless steel check valve,...
Showing 1-24 of 28 item(s)

Practical information

Need advice? Our team is available (Monday - Friday: 8:30-12:00 and 13:00-16:30).

Contact us

Delivery

  • Same-day dispatch for orders placed before 12 noon, in most cases.
  • Colissimo without signature in mainland France, delivery within 2 to 3 days.
  • Chronopost on request.
  • DB SCHENKER transport for oversized parcels: delivery to your freight forwarder in France, with guaranteed tracking.
Delivery terms

Advice and guides

Go to our guides

What is a booster pump used for?

A booster pump raises and steadies the water pressure from the mains, a tank, a well or a rainwater reserve. It supplies a house, a garden watering system, a building or a process with an even pressure at every outlet.

How to choose a booster pump

  • Flow rate: total of the outlets used at the same time.
  • Pressure you need, in bar.
  • Fixed or variable speed, according to the comfort and the energy use you want.
  • Number of pumps: one, or two to three for continuity of service.

To size it step by step, see our guide Choosing a booster set.

Frequently asked questions: Booster pumps

Fixed speed or variable speed booster?

A fixed-speed booster starts at full speed under the control of a pressure switch: simple and cheaper to buy. A variable-speed booster adjusts the motor speed to the demand: steady pressure, fewer starts and less noise, better control of electricity use.

How do I size a booster pump?

Add up the flow of the outlets used at the same time, then set the pressure you want in bar (1 bar is about 10 metres of water head). Also check the suction conditions: beyond a few metres between the water and the pump, choose a submersible pump.

Do I need a tank with a booster pump?

A diaphragm tank (expansion vessel) absorbs pressure changes and limits the number of pump starts. It is usually paired with fixed-speed boosters. See our Pressure tank category to pick the right capacity.

Why choose a booster with two or three pumps?

Several pumps give continuity of service: if one stops, the other takes over. They also share the load and alternate to spread the wear. This solution suits apartment buildings, public bodies and sites where water must never run out.

How can I increase the water pressure in a house?

A booster set pressurises and regulates the water when the mains, a tank or a well does not provide enough. First work out the pressure you need at the least favourable tap (see determining water pressure). For a supply from the public mains, check your water supplier’s connection rules.

How do I pre-charge the tank of a booster set?

A bladder tank is pre-charged when empty, with no water and no pressure in the circuit: the pre-charge pressure should be about 0.2 bar below the pump start pressure. The detail is in the guide choosing a bladder pressure tank.

Do you need advice before buying?

Our team helps you choose the right equipment for your installation: call +33 3 44 25 91 01 Monday to Friday, 8:30 am to 12:00 pm and 1:00 pm to 4:30 pm (French time), or email contact@pompes-h2o.com. Public bodies can pay by administrative order (mandat administratif), with invoicing through Chorus Pro.